NHTSA ID Number: 10167665
Manufacturer Communication Number: IK1200516
TSB/Document Date: 2019-11-12
Summary
Diagnostic Trouble Codes DTC
IK1200516 - 2010 MaxxForce DT 9 and 10 Diagnostic Trouble Codes DTC
Page 1 of 8
Countries:
CANADA, UNITED STATES Document ID: IK1200516
Availability:
ISIS, Bus ISIS, FleetISIS
Revision:
5
Major System:
ENGINES
Created:
8/22/2010
Current Language: English
Last Modified: 2/11/2013
Other Languages: Français, Español,
Author:
Viewed:
Eric George
97545
Less Info
Coding Information
Hide Details
Copy Link
Copy Relative Link
Bookmark
Add to Favorites
Provide Feedback
Helpful
Not Helpful
7578
14939
View My Bookmarks
Title: 2010 MaxxForce DT 9 and 10 Diagnostic Trouble Codes DTC
Applies To: 2010 MaxxForce DT 9 and 10
DESCRIPTION
2010 model year vehicles no longer utilize DTC identification by number. DTCs are now identified using the SPN and FMI
identifiers only. These two identifiers, known as the Suspect Parameter Number (SPN) and the Failure Mode Indicator
(FMI) are displayed in the DTC Window.
Suspect Parameter Number (SPN) - The SPN identifies the individual component causing the DTC.
Failure Mode Indicator (FMI) - The FMI identifies the type of failure of the individual component.
Pending Faults - Pending faults are possible faults that were detected on the first drive cycle and do not turn on the
Malfunction Indicator Lamp (MIL). Only a Heavy Duty Onboard Diagnostic (HD-OBD) fault can be set as pending.
Active Faults - Active faults or HD-OBD faults that were detected in the second drive cycle are currently active right now.
Previous Active Faults - Previous active faults are historical faults that were detected in a previous drive cycle, but are
not currently present.
Permanent Faults - Permanent faults are historic faults and should not be treated as a current problem with the control
system. When an active HD-OBD fault is set, a permanent fault is also set. (Up to four permanent fault codes can be
stored at one time.) A permanent fault code cannot be cleared with the Electronic Service Tool (EST) alone. There are
only three ways to clear permanent fault codes:
The monitor that set the code must execute and pass on three consecutive drive cycles.
The active codes are cleared with an Electronic Service Tool (EST). The monitor that set the code must execute the
minimum number of times that are needed to set the fault and pass each time.
Engine Control Module (ECM) calibration update.
Freeze Frame data provides a snapshot or record of the conditions of the engine control system at the time the fault code
was set. This can be helpful information when trying to duplicate the conditions that the code was set at. Freeze Frame
Data is cleared as soon as the DTC is cleared.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/4/2013
IK1200516 - 2010 MaxxForce DT 9 and 10 Diagnostic Trouble Codes DTC
Page 2 of 8
Figure 1: 2010 MaxxForce DTC list in ServiceMaxx
1. Suspect Parameter Number (SPN)
2. Failure Mode Indicator (FMI)
3. Fault Code Type
4. Clear DTCs
5. Freeze Frame Data Available
SPN
FMI
Circuit
Condition Description
27
0
EGRP fault: over temperature
27
3
EGRP signal Out of Range HIGH
27
4
EGRP signal Out of Range LOW
27
7
EGRP does not agree with commanded position
27
14
EGR internal circuit failure
51
2
ETV
ETP feedback signal error
51
7
ETV
ETP does not agree with commanded position
51
11
ETV
ETP operation fault- underVolt, overAmp, overTemp/ ETP H-bridge
Electrical Check
91
2
APP
APP1 and APP2 signal conflict
91
3
APP
APP1 signal Out of Range HIGH
91
4
APP
APP1 signal Out of Range LOW
94
0
EFP
Fuel Delivery Pressure above maximum
94
1
EFP
Fuel Delivery Pressure below minimum
94
3
FDP
FDP signal Out of Range HIGH
94
4
FDP
FDP signal Out of Range LOW
100
1
EWPS
Engine Oil System below Critical Pressure
100
3
EOP
EOP signal Out of Range HIGH
100
4
EOP
EOP signal Out of Range LOW
100
18
EWPS
Engine Oil System below Warning Pressure
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/4/2013
IK1200516 - 2010 MaxxForce DT 9 and 10 Diagnostic Trouble Codes DTC
102
2
IMP
IMP signal does not agree with BARO
102
3
IMP
IMP signal Out of Range HIGH
102
4
IMP
IMP signal Out of Range LOW
102
7
IMP
IMP signal not responding as expected
105
2
IMT
IMT signal does not agree with other sensors
105
3
IMT
IMT signal Out of Range HIGH
105
4
IMT
IMT signal Out of Range LOW
108
2
ECM Self
Pressure BARO Low/High at KOEO
108
3
ECM Self
BARO signal Out of Range HIGH
108
4
ECM Self
BARO signal Out of Range LOW
110
0
EWPS
Engine Coolant System above Critical Temperature
110
2
ECT1
ECT1 above/below sensor compare at KOEO Cold
110
3
ECT1
ECT1 signal Out of Range HIGH
110
4
ECT1
ECT1 signal Out of Range LOW
110
15
EWPS
Engine Coolant System above Warning Temperature
111
1
EWPS
Low Engine Coolant Level
111
2
ECL
ECL In-Range circuit Fault
132
3
MAF
MAF signal Out of Range HIGH
132
4
MAF
MAF signal Out of Range LOW
132
11
MAF
MAF Sensor Calibration – Insufficient number of data points
132
13
MAF
MAF Sensor Calibration Needed
132
14
MAF
MAF Sensor Calibration Failed
158
15
ECM PWR
ECM Switched voltage too HIGH
158
17
ECM PWR
ECM Switched voltage too LOW
164
0
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: IK1200516
Replacement Service Bulletin Number:
MFR Communication Date: 2013-02-11
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 【2026 OTOFIX D1 Lite Gives the Best Value for Money】OTOFIX D1 Lite bidirectional scan tool is more FASTER and SMARTER with 2026 Enhanced Hardwares & New Functions! 👍Alternative Bluetooth +USB connect 👍2G+64GB 👍4x ARM Cortex-A35 (1.5GHz) Processor (5X Faster CPU) 👍Android 9.0 OS 👍5G GHz WiFi 👍CANFD&DOIP 👍 FCA AutoAuth 👍38+ Services 👍3K+ Bi-Directional Control 👍Full Systems Diagnose 👍2 Years Update 👍150+ Vehicle Coverage.
- 👍【Active Tests】 OTOFIX D1 Lite is a bi-directional scan tool that can send commands to, and also receive information from vehicle control modules. This way, you can quickly locate and repair faulty auto parts. For Example: send direct commands to ask the vehicle to turn on/off the radiator fan, lights, sound horn, fuel pump, modulate throttle, open/close windows, operate mirrors and more. *Note that only available tests will be displayed in the menu.
- 👍【38+ Service Functions】 OTOFIX D1 Lite scan tool offers 38+ of the hottest service functions that are commonly used for car repairs. That include Oil reset/SAS/EPB/BMS/Throttle/ABS bleeding, and 2065-new SUS/ADBLUE/NOX/Headlamp resets (and more) to help restore your car status after repairs are done. Compared to other diagnostic scanners for cars, the OTOFIX D1 Lite scanner is much more fully-featured. *Note that specific functions available depend on the make/model/year of your car.
- 👍【All System Diagnostics + Cloud Report Management】 This 2026 car scanner OTOFIX D1 Lite provides troubleshooting and data for all ECUs: read/clear DTCs, view graphic live data/VIN, and locate system faults for safe driving. With Cloud Report Management, you can save detailed reports to cloud servers and easily shared them with others via QR codes/emails/text messages. Others can access these reports from any device (smartphones/tablets/PCs …) anytime, and you can better manage repair work.
- 👍【99% Car Coverage】 This one-station car scanner diagnostic for all cars works on 150+ major car brands across the world. 1) It supports CAN-FD/DoIP protocols: compatible with GMCAVALIER/TRAX/Encore/Envision/GL8(LSY)/CT4/CT5 after 2019; Volvo after 2018; Land Rover/Jaguar after 2017; and BM.W F/G all chassis. 2) For models equipped with security modules (such as Renault & 2018+ FCA SGW), its built-in AutoAuth allows you to easily break diagnostic barriers after registration.
This product presentation was made with AAWP plugin.
Last update on 2026-06-09 / Affiliate links / Images from Amazon Product Advertising API