NHTSA ID Number: 10165352
Manufacturer Communication Number: SA-010-19j
TSB/Document Date: 2019-09-23
Summary
2019-2020 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES. The 2019-2020 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. Index: PDI fuse, Apple CarPlay / Android Auto Install Kit, Blind Spot Monitoring System (BSM), Front Wiper Service Caution, i-ACTIVSENSE Switch, Traffic Sign Recognition (TSR), MAZDA CONNECT Power Function, MAZDA CONNECT Center Display View, In-Vehicle Digital Owner's Manual, Navigation System, SIRIUSXM Data Service, Power Door Locks, Auxiliary Key, Transmitter Battery Saving Function, Keyless Entry Using Auxiliary Key, Rear Door Child Safety Locks Operation, Link Seat & Climate Control Temperatures, Seat Warmer Turns OFF, Electric Parking Brake (EPB), A/C Air Temperature Is Not Cold, Tire Pressure Monitoring System (TPMS), Condition Based Maintenance, M-MDS (MDARS), Part Replacement.
Page 14 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
In-Vehicle Digital Owner's Manual
The in-vehicle digital OM can be displayed on the center display while
the vehicle is stopped. Customer can search descriptions and watch
videos of vehicle features and functions by operating the commander
switch.
NOTE:
1. The digital owner's manual must be installed during PDI. Due to
printing deadlines and later updates to the digital manual, the
content of the digital manual may differ from the printed manual.
2. USB memory flash drive FAT16 or FAT32 format is required for
installation.
3. The vehicle's infotainment system will only accept file names
[contents.tar] and [contents.sig]. File names with additional
suffixes will not be accepted.
4. The infotainment system may inadvertently be powered OFF if the
diagnostic assist function buttons are not pressed correctly.
Simply press and hold the volume knob to power back ON.
Page 15 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda
North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Navigation System
The 2019-2020 Mazda3 is not equipped with factory installed
navigation system, however, it is available as a dealer installed
accessory.
NOTE: The 2019-2020 Mazda3 accessory navigation SD is made
in Japan instead of USA. If using a made in the USA navigation
SD card (for 2014-2018 Mazda3) in the 2019-2020 Mazda3, it
will not function.
---
SIRIUSXM Data Service No Free Trial (Preferred Package and above)
1. Only available as a paid subscription.
2. The 2019-2020 Mazda3 is not equipped with a factory installed
navigation system, however, it is available as a dealer installed
accessory.
3. SiriusXM Traffic Plus feature requires in-vehicle navigation SD
card.
See Owner's Manual - Interior
Features - Mazda Connect Appendix
SA-007/19 - SIRIUSXM DATA
SERVICES
Page 16 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Power Door Locks
Doors Lock With Keys In The Vehicle When Liftgate Lock Switch Is
Pressed.
(Japan built) vehicles with VINs lower than
JM1BP******1142789 (produced before May 28, 2019)
DO NOT leave keys in the vehicle. The doors will lock with the keys in
the vehicle when the liftgate lock switch is pressed and the liftgate is
See Owner's Manual closed, but the liftgate will not lock in the above condition.
Before Driving - Doors and Locks
NOTE: This is currently under investigation.
Doors cannot be unlocked using the outside door handle touch sensor
The door handle touch sensor system may not operate normally
under the following conditions:
1. The front passenger (without key) grabs and holds the outside door
handle before the driver (with key) touches the drivers outside door
handle unlock touch sensor.
2. The driver touches the sensing area of the door lock touch sensor
and the sensing area of the door release touch sensor at the same
time.
Good
No Good
Page 17 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Auxiliary Key
The auxiliary keys need to be inserted into the transmitters during
PDI.
Auxiliary Key
Transmitter
NOTE: The auxiliary keys are small and could be
overlooked during PDI.
Vehicles arrive at the dealer with Auxiliary Keys
located in the glove compartment*
Vehicles arrive at the dealer with Transmitters
located in the front cup holder*
See Owner's Manual - Before
Driving - Keys- Auxiliary key
*Vehicles that arrive at the dealer after business hours, transmitters/auxiliary keys are located in
the dealer's early bird key drop box.
Insert the auxiliary key into the transmitter.
Remove the transmitter lower cover by sliding
the knob in the direction shown and then
sliding the cover in the opposite direction.
Page 18 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Insert the auxiliary key.
Install the transmitter lower cover by inserting
the tabs of the lower cover into the slots of the
transmitter.
1. If one auxiliary key is lost, some key machines can trace cut a new
replacement key.
2. If both auxiliary keys are lost, key cutting machines do not
recognize vehicle key code and will not cut new replacement keys.
Replace the front door key cylinder set.
NOTE: If the front door key cylinder set is replaced, eMDCS system
key code information will need to be changed. Contact Helpdesk by
phone (949 727-6434) or email ([email protected]) and
provide:
1. VIN
2. Replacement part key code.
Transmitter Note:
Page 19 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
1. If one transmitter is lost, inform the customer to take cautions not
to lose the 2nd transmitter.
2. If both transmitters are lost, the vehicle will be disabled. Use
MDARS to program new transmitters.
3. Replacement battery type is CR2032 (3V, 225mAh), which is
different then previous 6th generation transmitter battery type
CR2025 (3V, 160mAh). If the wrong battery is installed, the
transmitter might not work properly (malfunction).
Page 20 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Turning on the power saving
function
After you have turned on the
power saving function according
to the following procedure, the
hazard warning lights and sound
operate* one time.
1. Press the lock button on the
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
2. Press the lock button
continuously for 1.5 seconds or
longer while the operation
Transmitter Battery Saving Function (Key Fob)
indicator light turns on (for 5
The Mazda3 has a "power saving" function built into the keyless entry seconds).
system where some key fob functions are disabled. This feature could 3. Press any of the buttons on the
accidentally be enabled and some concerns with the vehicle may be: transmitter to make sure that the
operation indicator light does not
1. Engine does not start.
turn on/flash.
2. Engine does not start unless you hold the fob to the start/stop
button.
Turning off the power saving
3. Doors do not unlock using the door handle, but unlock with the
function
remote.
After you have turned off the
4. Doors do not lock using the door handle, but lock with the
power saving function according
remote.
to the following procedure, the
5. Transmitter indicator light does not turn on/flash.
hazard warning lights and sound
operate* one time.
1. Press any of the buttons on the
transmitter to make sure that the
operation indicator light does not
turn on/flash.
2. Press the lock button on the
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
3. Press the lock button
continuously for 1.5 seconds or
longer while the operation
indicator light turns on (for 5
Page 21 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
seconds).
*: with the advanced keyless
function
Also see Owner's Manual Before Driving - Keys - Power
saving function
Page 22 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Keyless Entry Using Auxiliary Key
If the vehicle battery is discharged and/or the key battery is dead,
vehicle entry is possible using the auxiliary key.
See Owner's Manual Before Driving - Keys - Auxiliary
Key
Then refer to Owner's Manual Before Driving - Doors and Locks Unlocking with Auxiliary Key
Rear Door Child Safety Locks Operation
The auxiliary key is required to enable (lock) and disable (unlock) the
rear door child safety locks.
See Owner's Manual Before Driving - Doors and Locks Rear Door Child Safety Locks
1. Auxiliary Key
2. Lock
3. Unlock
Page 23 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Theft-Deterrent System
The Mazda3 is not equipped with a Theft-Deterrent System.CAUTION:
DO NOT use MDARS to enable:
1. Burglar Alarm
2. Intrusion Sensor
The Mazda3 does not have the necessary Theft-Deterrent System
hardware to function if enabled using MDARS, and MDARS cannot
disable the Theft-Deterrent System after it has been enabled.
The following DTC's may be stored if the burglar alarm or intrusion
sensor are enabled:
1. B109F:87 - Intrusion Sensor Module
2. B2002:87- On Board Charger DC/DC Low Voltage Side
---
Page 24 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Seat Warmer and Heated Steering Wheel Auto Mode
The driver and front passenger's seater warmers* and the heated
steering wheel* can be set to be automatically controlled (turned on
and off) by the climate control system, depending on the set
temperature.
Auto Mode
1. Go to MAZDA CONNECT home screen and select "Settings"
2. Select “Vehicle Settings”.
3. Enable “Link Seat Climate Control Temperatures”.
4. Press the climate control AUTO switch.
Link Seat Climate Control Temperatures
Setting
Climate Control Auto
Switch
See Owner's Manual Essential Safety Equipment - Seat
Warmer/Heated Steering Wheel Seat Warmer / Heated Steering
Wheel
* if equipped
Seat Warmer Turns OFF in Manual Mode
JM1 (Japan built) vehicles produced before
December 17, 2018
3MZ (Mexico built) vehicles produced before March 19, 2019
1. The front seat warmers turn OFF after approximately 10 minutes
in manual mode.
2. DTC B1030:13 (SEAT WARMER UNIT (LH) CIRCUIT MALFUNCTION
(HEATER SIDE)) is stored.
3. Front seat warmer functions after seat cool down and ignition OFF
- ON cycle.
Contact Hotline for latest repair information.
---
Page 25 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Seat Warmer Will Not Turn ON After Previous Usage
JM1 (Japan built) vehicles produced after
December 17, 2018
3MZ (Mexico built) vehicles produced after March 19, 2019
--1. DTC B1030:13 (SEAT WARMER UNIT (LH) CIRCUIT MALFUNCTION
(HEATER SIDE)) is stored.
2. Front seat warmer functions after seat cool down and ignition OFF
- ON cycle.
Contact Hotline for latest repair information.
Page 26 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Electric Parking Brake (EPB)
Parking Brake Auto Operation
When the ignition is switched OFF, the parking brake will be applied
automatically. The EPB indicator light in the instrument cluster and
the EPB switch indicator light turn ON.
1. Indicator light
Canceling the Parking Brake Auto Operation
Parking brake auto operation can be canceled using the procedure in
the Owner's Manual.
NOTE: When the ignition is cycled back ON, the parking brake auto
operation is restored.
See Owner's Manual - When
Driving - Brake - EPB Auto
operation
Parking Brake Automatic Release
If the accelerator pedal is depressed with the parking brake applied
and all of the following conditions are met, the parking brake is
automatically release. When the parking brake is released, the EPB
indicator light in the instrument cluster and the EPB switch indicator
light turn off.
A/T
M/T
Engine is running
Driver's door is closed
Driver's seat belt is fastened
Selector lever is in the D, M, or R
position
Shift lever is in a position other than
neutral
Clutch pedal is depressed halfway
Page 27 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
A/C Air Temperature Is Not Cold
When diagnosing A/C performance complaints, use a thermometer as
shown below and only compare A/C performance to another vehicle
that is the same model/year/HVAC type*.
MGSS: REFRIGERANT SYSTEM
PERFORMANCE TEST [(US)]
*HVAC Types:
1. FULL-AUTO AIR CONDITIONER
2. MANUAL AIR CONDITIONER
Tire Pressure Monitoring System (TPMS) Change
The TPMS system uses a new rubber type direct TPMS.
NOTE: The new rubber type is not reusable. If the TPMS sensor is
removed from the wheel, it must be replaced.
MGSS: TIRE PRESSURE
MONITORING SYSTEM (TPMS)
New Rubber Type
Old Metal Type
Page 28 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Condition Based Maintenance (Except Canada)
The vehicle calculates the maintenance (oil change) timing.
1. This function cannot be turned OFF.
2. Distance until the oil change is available in MAZDA CONNECT.
3. Reset is required after every oil change.
MGSS: MAINTENANCE MONITOR
OPERATION PROCEDURE
New M-MDS (MDARS)
A new M-MDS diagnostic tester (MDARS) for 7th generation vehicles
(starting with the 2019 Mazda3) is used.
1. Performs more maintenance service functions
2. Performs more complicated vehicle electrical system diagnostic
3. Reprograms more ECU's
MGSS: BASIC KNOWLEDGE
Parts Replacement
When replacing vehicle parts such as ECU's, motors, seats....etc,
always refer to MGSS. Some new components may not operate if
MGSS new part replacement procedure is not performed.
---
Page 29 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-010-19j
Replacement Service Bulletin Number:
MFR Communication Date: 2019-09-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.