NHTSA ID Number: 10165352
Manufacturer Communication Number: SA-010-19j
TSB/Document Date: 2019-09-23
Summary
2019-2020 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES. The 2019-2020 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. Index: PDI fuse, Apple CarPlay / Android Auto Install Kit, Blind Spot Monitoring System (BSM), Front Wiper Service Caution, i-ACTIVSENSE Switch, Traffic Sign Recognition (TSR), MAZDA CONNECT Power Function, MAZDA CONNECT Center Display View, In-Vehicle Digital Owner's Manual, Navigation System, SIRIUSXM Data Service, Power Door Locks, Auxiliary Key, Transmitter Battery Saving Function, Keyless Entry Using Auxiliary Key, Rear Door Child Safety Locks Operation, Link Seat & Climate Control Temperatures, Seat Warmer Turns OFF, Electric Parking Brake (EPB), A/C Air Temperature Is Not Cold, Tire Pressure Monitoring System (TPMS), Condition Based Maintenance, M-MDS (MDARS), Part Replacement.
Service Alert
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
2019-2020 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED
FEATURES
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
BULLETIN NOTES
This Service Alert supersedes the previously issued Service Alert(s) listed below: The changes are noted in
Red.
Previous
Service
Alert(s):
Date(s) Issued:
SA-010/19
08/14/19, 08/06/19, 07/19/19, 07/12/19, 06/13/19, 06/07/19,05/09/19,05/02/19,
04/25/19,04/11/19, 03/29/19, 03/21/19, 03/15/19,03/08/19, 03/06/19, 03/05/19,
02/25/19
APPLICABLE MODEL(S)/VINS
2019-2020 Mazda3
DESCRIPTION
The 2019-2020 Mazda3 has new and revised features that are different from previous models, and may be
difficult to understand. This Service Alert provides valuable information to support potential dealer and
customer concerns.
Index
PDI fuse
Apple CarPlay™ / Android Auto™ Install Kit
Blind Spot Monitoring System (BSM)
Front Wiper Service Caution
i-ACTIVSENSE Switch
Traffic Sign Recognition (TSR)
MAZDA CONNECT Power Function
MAZDA CONNECT Center Display View
In-Vehicle Digital Owner's Manual
Navigation System
SIRIUSXM Data Service
Power Door Locks
Auxiliary Key
Page 1 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda
dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Transmitter Battery Saving Function
Keyless Entry Using Auxiliary Key
Rear Door Child Safety Locks Operation
Theft-Deterrent System
Link Seat & Climate Control Temperatures
Seat Warmer Turns OFF
Electric Parking Brake (EPB)
A/C Air Temperature Is Not Cold
Tire Pressure Monitoring System (TPMS)
Condition Based Maintenance
M-MDS (MDARS)
Part Replacement
Item
Service Information
Page 2 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Fuse Block
Fuse to be Installed at PDI (JM1 = Japan built)
(Engine Compartment)
1. There is only one fuse removed at the factory that should be
installed at PDI. It is fuse F27 (25A). The fuse is stored in the lid of
the fuse box with the spare fuses.
2. The current PDI form is wrong. It states there are two (2) fuses
removed (F46 and F50) that should be installed. The form is being
updated with this change.
Fuse to be Installed at PDI (3MZ = Mexico built)
Fuse Block
1. There are two fuses removed at the factory that should be
(Left Side)
installed at PDI. They are fuse F27 (25A) and F15 (15A).
2. NOTE: On some vehicles, fuse F13 (15A) is being removed
instead of F15 at the factory. This causes the Commander switch
to be inoperative.
3. The F27 (25A) fuse is stored in the lid of the fuse box with the
spare fuses.
4. The F15 (15A) fuse is stored in the lower panel compartment on
the left side of the steering wheel.
5. Go to SA-017/19 for details.
Apple CarPlay™ / Android Auto™ Install Kit
1. The Mazda3 sedan (4 door base model) is not equipped with
See SA-001/19 - APPLE CARPLAY™
Apple CarPlay™ / Android Auto™.
/ ANDROID AUTO™ FREQUENTLY
2. Apple CarPlay™ / Android Auto™ Smartphone Screen Mirroring Kit ASKED QUESTIONS (FAQ)
accessory is not available for the Mazda3 sedan (4 door base
model).
Page 3 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Blind Spot Monitoring (BSM) System
1. BSM system indicates vehicle on the opposite side.
2. i-ACTIVSENSE indicator ring will not turn green
3. Rear Cross Traffic Alert (RCTA) does not work
4. Rear side radar sensor aiming may fail
5. TPMS DTC(s) stored
This may be caused by BSM rear side radar sensor(s) installed facing
the wrong direction.
OK
NG
---
Rear side radar sensors (A) part label must not be visible when
installed.
Front Wiper Service Caution
1. Wiper arm park position is located under the hood.
2. When servicing front wipers, front wiper service mode is required
or damage to wiper arms may occur (see Service Information).
3. If wiper arms are replaced, M-MDS is needed for wiper arm
adjustment (see Service Information)
4. DO NOT use wiper arms as markers when in dealer inventory.
See Owner's Manual Maintenance and Care Replacing
Windshield Wiper Blades
MGSS: WINDSHIELD WIPER ARM
AND BLADE ADJUSTMENT
Page 4 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
i-ACTIVSENSE Switch (New)
Activated Status: Green
For 2019-2020 (early production):
See Owner's Manual - When
Driving - i-ACTIVSENSE - iACTIVSENSE
When iACTIVSENSE is in
normal operating
status, the
instrument cluster
i-ACTIVSENSE
indicator is green.
For 2020 (later prodcution):
See Owner's Manual- When
Driving - i-ACTIVSENSE - iACTIVSENSE
Stand-by Status: White
When iACTIVSENSE has
an environmental
fault, such as a
dirty windshield or
driving into the
sun, the
instrument cluster
i-ACTIVSENSE
indicator is white.
Page 5 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Warning Status: Amber
When iACTIVSENSE has a
fault that needs
diagnosis by a
dealership, the
instrument cluster
i-ACTIVSENSE
indicator is amber.
For 2019-2020
(early production)
with VINS:
1. JM1BP******
150231
2. 3MZBP****** Partially Cancelled Status:
INDICATOR IS TURNED OFF
118757
and earlier
When the iACTIVSENSE
switch is pressed
and released
immediately, the
following systems
are canceled.
1. Lane
Departure
Warning
System
(LDWS)
2. Blind Spot
Monitoring
(BSM)
Page 6 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
3. Distance
Speed Alert
(DSA)
4. Rear Cross
Traffic Alert
(RCTA)
5. Lane-keep
Assist System
(LAS)
To turn the system
back to "Activated
Status" , press the
i-ACTIVSENSE
switch once.
NOTE: If MRCC is
used, the system
will also return to
"Activated Status".
For 2019-2020
(early production)
with VINS:
Fully Cancelled Status:
1. JM1BP****** I-ACTIVSENSE INDICATOR IS OFF
150231
SBS OFF WARNING LIGHT IS ON
2. 3MZBP******
118757
and earlier
When the iACTIVSENSE
switch is pressed
and held, all
systems are
canceled.
1. Lane
Departure
Warning
System
(LDWS)
2. Blind Spot
Monitoring
(BSM)
Page 7 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
3. Distance
Speed Alert
(DSA)
4. Rear Cross
Traffic Alert
(RCTA)
5. Lane-keep
Assist System
(LAS)
6. Smart Brake
Support (SBS)
7. Smart Brake
Support [Rear]
(SBS-R)
8. Smart Brake
Support [Rear
Crossing] (SBS
RC)
For 2020 (later
production) with
VINS:
Cancelled Status:
1. JM1BP******
I-ACTIVSENSE OFF INDICATOR IS ILLUMINATED
150232
2. 3MZBP******
118758
and later
When the iACTIVSENSE
switch is pressed,
the following
systems are
canceled and the
i-ACTIVSENSE OFF
indicator turns
illuminates.
1. Lane
Departure
Warning
System
(LDWS)
Page 8 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
2. Blind Spot
Monitoring
(BSM)
3. Distance
Speed Alert
(DSA)
4. Rear Cross
Traffic Alert
(RCTA)
5. Lane-keep
Assist System
(LAS)
To turn the system
back to "Activated
Status", press the
i-ACTIVSENSE
switch once.
NOTE: If MRCC is
used, the system
will also return to
"Activated Status".
Page 9 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Traffic Sign Recognition (TSR) *
NOTE:
1. TSR function is only available with a dealer installed in-vehicle
navigation system accessory.
2. TSR function requires Forward Sensing Camera (FSC) recognition
or navigation SD card map data when the vehicle is driven.**
3. TSR function is not displayed in the Active Driving Display.
4. TSR function is disabled when Apple CarPlay™ or Android Auto™ is
connected.
* Some models
See Owner's Manual - When
Driving - i-ACTIVSENSE - iACTIVSENSE - Traffic Sign
Recognition System (TSR)
MAZDA CONNECT
Speed Limit Alert OFF
(Default Setting)
No Function
MGSS: Traffic Sign Recognition
(TSR)
Driving under the speed limit
Page 10 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
Driving over the speed limit
Stop sign and Speed Limit recognized
Do Not Enter sign and Speed Limit
recognized
Page 11 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
MAZDA CONNECT
Speed Limit Alert ON
(Customer Setting
Change)
Excessive Speed Warning
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Page 12 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
MAZDA CONNECT New Power Off Function
See Owner's Manual Interior Features - Mazda
Connect
1. Audio Mute - Short press the volume knob (Press again to cancel)
2. Power Off - Press and hold the volume knob (Press and hold again MGSS: ENTERTAINMENT SYSTEM
to Power ON)
In-vehicle Owner's Manual
installation
Page 13 of 29
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 09/16/2019
MAZDA CONNECT Center Display View
The rear-view monitor does not utilize all of the center display space.
Function
Display
MAZDA
CONNECT FM
Rear View
Monitor
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-010-19j
Replacement Service Bulletin Number:
MFR Communication Date: 2019-09-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.