To:
Subject:
Date:
Pages

L636A.11.19

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14


Campaign code:
L636-A.11.19.
Campaign Name:
Safety belt buckle replacement.
Model:
Urus.

Procedures are identified by a letter (e.g. A, B
or C….etc., whose differences will be explained later in this bulletin); make sure that
the spare parts corresponding to the assigned
procedure are used.
Example

Model year:
From 2019.
Special or limited editions:
All versions.
Markets:
India market only.
VIN identification:
From KLA00529 to KLA03890.
ZPBEA1ZL9KLA00529
ZPBEA1ZL1KLA00542
ZPBEA1ZL6KLA00553
ZPBEA1ZL8KLA00554
ZPBEA1ZL3KLA00557
ZPBEA1ZLXKLA00569
ZPBEA1ZLXKLA00670
ZPBEA1ZL7KLA00674
ZPBEA1ZL0KLA00676
ZPBEA1ZL9KLA00692
ZPBEA1ZL4KLA00695
ZPBEA1ZL1KLA00699
ZPBEA1ZLXKLA00703
ZPBEA1ZL5KLA00706
ZPBEA1ZL9KLA00742
ZPBEA1ZL2KLA00744
ZPBEA1ZL2KLA00758
ZPBEA1ZL2KLA00761

ZPBEA1ZL3KLA00767
ZPBEA1ZL5KLA00804
ZPBEA1ZL3KLA00820
ZPBEA1ZL7KLA01436
ZPBEA1ZL6KLA01444
ZPBEA1ZL3KLA01501
ZPBEA1ZL3KLA01563
ZPBEA1ZL6KLA01699
ZPBEA1ZL7KLA02005
ZPBEA1ZLXKLA02063
ZPBEA1ZL7KLA02151
ZPBEA1ZL4KLA02172
ZPBEA1ZL8KLA02322
ZPBEA1ZLXKLA02662
ZPBEA1ZLXKLA03102
ZPBEA1ZL4KLA03788
ZPBEA1ZL6KLA03890

Important: before proceeding with the repair, connect to the warranty portal and use VIN Info to check
that


Rev.00

The vehicle is actually affected by the instructions given in this bulletin; some vehicles may
not be, even when their VIN is included.

NOTE:
Procedure A will be available only when the instructions require a preliminary check to be performed to
determine whether or not the vehicle actually needs
updating.
Information to the network:
As a result of the continuous monitoring of the product, Automobili Lamborghini S.p.A. has identified
that faults may occur as a result of a mismatch between the seat belt buckle specific for this market and
the related ECU’s software.
Operations:
The following instructions include the step:
-

Step B: Safety belt buckle replacement, ECUs
15 and A5 configuration;

-

Step C: Safety belt buckle replacement.

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

1/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14
played by the system (see example) and select the option performed on the vehicle.

Solutions for the network:
Update the car as stated in the instructions.

IMPORTANT:
Before proceeding with the execution of this campaign,
please make sure that if the vehicle has a VIN lower than
ZPBEA1ZL7KLA01436, the vehicle must have executed
first
the
campaign
“L636A0119”.

Replacement parts:
Please order the indicated codes along with the following steps
-

Depending on the option performed, the reimbursement will be structured in the following manner:
-

OPTION B – Safety belt buckle replacement,
ECUs 15 and A5 configuration.
Steps to perform: I, II, III.
Labor: 1,15 hour
spare parts: 4K8857755JMNB

-

OPTION C – Safety belt buckle replacement.
Steps to perform: I, III.
Labor: 0,75 hour
spare parts: 4K8857755JMNB

Step B: Safety belt buckle replacement, ECUs
15 and A5 configuration;
Step C: Safety belt buckle replacement.

Cod.

Description

4K8857755JMNB

Belt buckle

Q
1

Management of replaced parts:
Store the parts removed from the vehicle in a suitable
manner, marked with their barcode for identification
during visits by the competent Area Manager.
Labor:
- Step B: 1,15 h
- Step C: 0,75 h
Bulletins superseded:
None.

WARNING!
Attach all documents generated during the work carried out as evidence of the work itself, for instance
workshop orders, diagnostic protocols etc. If one or
more of these is missing it may lead to a rejected reimbursement request.
Fill out the Service and Recall Campaign section in
the warranty booklet, which is shown in the figure below.

Warranty instructions:
To request reimbursement for the corrective action
performed, access the Warranties section of the Lamborghini Portal and follow the “Campaigns” entry instructions in the W.Claim manual which can be
downloaded from the Portal.
Select the required campaign and proceed with entry,
carefully reading the options present in the alert dis-

Rev.00

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

2/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14

Tools/Materials required
Cod.
Descrizione.
n/n

Rev.00

Q
n/n

0

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

3/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14

Preliminary operations:
1. Ensure you have recently synced with the Mirror
server by checking the last synchronization date:
http://mirrorserver/maintenance/diagnosis.py
or by directly entering the Btac-box IP address:

The instructions contained in this bulletin are based on the
ODIS diagnosis software updated to version 5.1.6 and the
Lamborghini 2.20.2 or later database (refer to information
bulletin BI.16.19 and make sure that ODIS Service is
properly updated on the laptop).

http://[IP_address]/maintenance/diagnosis.py
if you have not previously set the IP alias of the
mirror server.
(e.g.
http://12.34.567.890/maintenance/diagnosis.py)

IMPORTANT:
Make sure that the last synchronization was performed after July 10, 2019.

Rev.00

2. It is essential that you connect an appropriate battery charger to the charge points available in the
engine hood (left side of the vehicle). Please refer
to the following figure.

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

4/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14

Work instructions:
The updating procedure described here includes the
following steps:
I.

Safety belt buckle replacement

II. Control units 15 and A5 configuration;
III. Fault memory deletion.

IMPORTANT:

Do not perform other types of activity on the car
while executing the campaign.
Carrying out the procedure blindly implies unsolvable damage to the control unit and resulting replacements.
I.

Safety belt buckle replacement

2. Disconnect the seat connectors.

Procedure

1. Release and remove the seat connections cover.

WARNING
Move the seat to the rear to access the cover.

3. Remove the front and rear covers of the passenger
seat fasteners.

Rev.00

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

5/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14

WARNING
Move the seat back and front to facilitate the operation.

5. Release the seat and pull it out, passing it through
the passenger access door.
CAUTION

4. Remove the 4 screws.
Tighten the screws.
Tightening torque: 40.00 Nm ( 29.5 lbf ft )

WARNING

A second operator is required to perform the procedure.
IMPORTANT
Be careful when removing, moving and storing
the component as it may be damaged. Remove it
carefully without making any movements that
could damage the interior linings.

Move the seat back and front to facilitate the operation.

Rev.00

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

6/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14

6. Release from the fastening and disconnect the
connector of the safety belt buckle.

8. Remove the screw.
Tighten the screw.
Tightening torque: 40.00 Nm ( 29.5 lbf ft )

7. Release the wiring from the fixing.

9. Remove the safety belt buckle.

Rev.00

This document and its contents are strictly confidential and private and are provided for informational purposes only and may not be copied, recorded, transmitted, further distributed to any other subject, or published, in whole or in part, by any means or in any form and for
any purpose, without the prior written authorization of Automobili Lamborghini S.p.A. All copyrights are the property of Automobili
Lamborghini S.p.A based on the applicable laws. The company reserves the right to make updates and modifications.
doc. nr: L/V6_M06 Rev.[06]

7/14

L636A.11.19

To:
Subject:
Date:
Pages

Official After Sales Network
Safety belt buckle replacement
09 August 2019
14
II.

Control units 15 and A5 configuration:

Refer to the procedure in the workshop manual
regarding "Implementation of an SVM code".

IMPORTANT:
Improper use of this function can cause damage to the
ECUs.

12. To start the procedure to execute an SVM code,
select the “Special functions” card in ODIS.

Final operations
10. Fit the new seat belt buckle (4K8857755JMNB).
11. Complete the assembly by following the reverse