Installation and Conversion Instructions

Cayenne (92A)
39/16

ENU

9627

9

Sport Plus Mode for PCM4

Revision:

This bulletin replaces bulletin Group 9, #39/16, dated February 3, 2017.
> Applicable model year was changed to “As of 2017, up to 2018”.
> Under “Restriction:” NOT approved for Diesel models! was added.
> Work procedures were revised.

Model Year:

As of 2017 up to 2018

Concern:

Retrofitting

Restrictions:

•
•
•

NOT approved for Diesel models!
ONLY for vehicles with PCM4
ONLY for vehicles WITHOUT compass/Sport Chrono clock (I-no. QR0) or WITH analog clock (I-no.
QR3)

Figure 1
Notes:

Activating the "Sport Plus mode" option using the Sport Plus button in the center console allows sporty
tuning of Porsche Stability Management (PSM), Porsche Active Suspension Management (PASM),
Porsche Dynamic Chassis Control (PDCC), transmission and electronic engine management, depending
on the vehicle equipment.
When Sport Plus mode is activated, the Porsche control systems are intentionally shifted towards greater
agility and driving dynamics. (For more information, see Owner’s Manual).
The Sport and Sport Plus modes are displayed in the instrument cluster.
Data relating to laps/distances driven can be recorded and evaluated when the stopwatch (digital display
in the instrument cluster) and Porsche Communication Management (PCM) are combined.

Tequipment

Aug 2, 2019
Page 1 of 8

9

Cayenne (92A)
9627

Important:

ENU

Installation and Conversion Instructions

39/16

ONLY for vehicles with analog clock (QR3):
When coding is complete, B will be displayed instead of A in the main menu Vehicle > Settings >
Date/time on the multi-function display in the instrument cluster.

A
B

Multi-function display
– Clock lighting
– Chrono time

The clock lighting works when the Chrono time option is confirmed (tick appears).
Information
Please inform your customers about the change in the multi-function display.

Parts Info:

95B.044.900.73

Information on
ordering:

A strip for switches (keypad) must also be ordered.
The following illustrations and table make ordering easier.

Aug 2, 2019
Page 2 of 8

 Sport Plus mode

Tequipment

Installation and Conversion Instructions

Cayenne (92A)
39/16

ENU

9627

9

Figure 2

Tequipment

Aug 2, 2019
Page 3 of 8

9

Cayenne (92A)
9627

ENU

Installation and Conversion Instructions

39/16

Figure 3

Aug 2, 2019
Page 4 of 8

Installed
strip for switches

Required
strip for switches

Part number

Part number

1

958.613.158.00

2

958.613.160.00

3

958.613.159.00

4

958.613.161.00

5

958.613.162.00

6

958.613.164.00

7

958.613.163.00

8

958.613.166.00

9

958.613.167.00

10

958.613.169.00

11

958.613.168.00

12

958.613.170.00

13

958.613.171.00

14

958.613.173.00

Tequipment

Installation and Conversion Instructions

Tools:

Cayenne (92A)
39/16

ENU

15

958.613.172.00

16

958.613.174.00

17

958.613.175.00

18

958.613.177.00

19

958.613.176.00

20

958.613.178.00

9627

9

9900 - PIWIS Tester 3

Work Procedure: 1

2

Preparatory work
1.1

Connect battery charger (  Workshop Manual '2X00IN Battery trickle charging').

1.2

Remove levelling system (selector switch) (  Workshop Manual '431019 Removing and
installing levelling system (selector switch)').

Convert levelling system (selector switch).
2.1

Release locking lug – at the front ( Figure 4
-a-) and lift the trim slightly ( Figure 4 ).
1
2
3

– Cover
– Locking lug
– Clips

Insert a small screwdriver into the housing (
Figure 4 -b-) and carefully release the clips
( Figure 4 ).
Pull the trim up and off.

Figure 4

Tequipment

Aug 2, 2019
Page 5 of 8

9

Cayenne (92A)
9627

ENU

Installation and Conversion Instructions

39/16

2.2

Release combined switch ( Figure 5 -a-)
and pull it out of the keypad ( Figure 5 ).
1
2

– Combined switch
– Keypad

2.3

Insert combined switch into the new keypad
and press it down until the combined switch
locks with an audible click.

2.4

Position trim on the levelling system (selector
switch) and press it down until the trim locks
with an audible click.

2.5

Figure 5
Install levelling system (selector switch) ( 
Workshop Manual '431019 Removing and installing levelling system (selector switch)').

NOTICE
Voltage drop
•

Risk of irreparable damage to control unit

•

Risk of damage to control unit

•

Fault entries in the control unit

•

Coding in the control unit is aborted

•

Malfunctions in control unit, even during programming



Prior to disconnecting the control unit, switch off the ignition and remove the ignition key.



Ensure that the power supply is not interrupted during programming.



Connect battery charger/power supply suitable for AGM Type batteries, recommended current rating
of 90A fixed voltage 13.5V to 14.5V.

Information
The 9900 - PIWIS Tester III instructions take precedence since the description may be different
with later Tester releases.
The procedure described here has been structured in general terms; different text or additions may
appear on the 9900 - PIWIS Tester III.
3

Coding Sport Plus mode
3.1

Enable Sport Plus mode.
3.1.1

Aug 2, 2019
Page 6 of 8

9900 - PIWIS Tester 3 must be connected before switching on the ignition.

Tequipment

Installation and Conversion Instructions

Cayenne (92A)
39/16

ENU

9627

9

3.1.2

Select Diagnostics. 9900 - PIWIS Tester 3 detects the model line.
Press "Next". PIWIS Tester III Diagnostics starts.

3.1.3

Select Additional menu by pressing •F7“. Press •F11“ to confirm the question
"Create vehicle analysis log (VAL)?".

3.1.4

Select the "Function enable" function. Press •F12“ to continue.
Information
PIWIS Tester must be connected to the Porsche Partner Network (PPN) via WLAN
or data cable!

3.1.5

Enter PPN user. Touch the PPN password input field and enter the password.
Select "Login".

3.1.6

Select the "Enable" function. Press •F12“ to continue.

3.1.7

Touch the licence number input field and enter the licence number. Press •F12“
to continue.

3.1.8

Confirm the "Sport Chrono" function by pressing •F12“.
Wait until "Functions have been enabled successfully." appears.

3.1.9

Press •F12“ to go to the "Overview" menu.
Select the "Display enabled functions" function. Press •F12“ to continue.
Wait until a table containing enabled functions appears, e.g.:

Control unit

Function

PCM4 (001)

Sport Chrono

Status

Voice control
Bluetooth
Navigation
UAS (universal audio interface)
Press •F12“ to continue.
Press •F11“ to return to the Overview menu.
3.2

Adapt coding.
3.2.1

Select all control units by pressing •Ctrl A“. Press •F12“ to continue.

3.2.2

Switch to the "Codings/adaptations" menu. Press •F12“ to continue.

3.2.3

Select "Automatic coding" mode. Press •F12“ to continue.

Tequipment

Aug 2, 2019
Page 7 of 8

9

Cayenne (92A)
9627

96 27 31 43:

ENU

Installation and Conversion Instructions

39/16
3.2.4

Wait until "Coding has been completed successfully." appears. Press •F12“ to
continue.

3.2.5

Switch to the "Overview" menu.

3.3

Read out the fault memory of all systems, work through any existing faults, and erase the
fault memory (  Workshop Manual '033500 Fault memory for on-board diagnosis').

3.4

Disconnect the battery charger (  Workshop Manual '2X00IN Battery trickle charging').

3.5

Carry out a function test.
Labor time: 133 TU

Activating Sport Plus mode.

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.

© 2019 Porsche Cars North America, Inc.

Aug 2, 2019
Page 8 of 8

Tequipment