NHTSA ID Number: 10163991
Manufacturer Communication Number: B010518
TSB/Document Date: 2019-08-19
Summary
N63T ENGINE FUEL INJECTORS: LIMITED WARRANTY EXTENSION TO 10 YEARS/120000 MILES This Service Information Bulletin replaces SI B01 05 18 dated January 2018. Engine starts poorly (hard starting) rough idle and misfires.
Service Information Bulletin
July 25, 2019
Warranties
B01 05 18
N63T ENGINE FUEL INJECTORS: LIMITED WARRANTY
EXTENSION TO 10 YEARS/120,000 MILES
This Service Information Bulletin replaces SI B01 05 18 dated January 2018
What’s New:
• MY 2015 (X5 xDrive50i) and F16 (X6 xDrive50i) vehicles added
• SIB reformatted, Situation, Cause and Correction added
• Parts Information and mailing address updated.
MODEL
F01 (750i) (N63T
Engine) Model Years
2013 and 2014
produced 7/1/2012 to
6/30/2014
F01 (ALPINA B7 SWB)
(N63T Engine) Model
Years 2013 and 2014
produced 7/12/2012 to
6/28/2014
F01 (750i xDrive)
(N63T Engine) Model
Years 2013 and 2014
produced 7/2/2012 to
6/25/2014
F02 (750Li) (N63T
Engine) Model Years
2013 and 2014
produced 7/2/2012 to
6/26/2014
F02 (750Li xDrive)
(N63T Engine) Model
Years 2013 and 2014
produced 7/2/2012/to
6/27/2014
F02 (ALPINA B7 LWB)
(N63T Engine) Model
Years 2013 and 2014
produced 7/6/2012 to
6/16/2014
F06 (650i Gran Coupe)
(N63T Engine) Model
Years 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only
F10 (550i Sedan)
(N63T Engine) Model
Year 2014 produced
6/27/2013 to 6/30/2014
F06 (650i xDrive Gran
Coupe) Model Years
2013, 2014 and 2015
produced 7/2/2012 to
6/30/2014 only
F13 (650i Coupe)
(N63T Engine) Model
Year 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only
F13 (650i xDrive
Coupe) (N63T Engine)
Model Year 2013,
2014 and 2015
produced 7/1/2012 to
6/30/2014 only
F07 (550i Gran
Turismo) (N63T
Engine) Model Years
2013 and 2014
produced 7/2/2012 to
6/13/2014
F12 (650i Convertible)
(N63T Engine) Model
Years 2013, 2014 and
2015 produced
7/2/2012 to 6/30/2014
only
F15 (X5 xDrive50i)
(N63T Engine) Model
Year 2014 and 2015
produced 5/8/2013 to
7/29/2015
F10 (550i xDrive
Sedan) (N63T Engine)
Model Year 2014
produced 7/24/2013 to
6/25/2014
F01 (ALPINA B7
xDrive SWB) (N63T
Engine) Model Years
2013 and 2014
produced 7/9/2012 to
6/23/2014
F02 (ALPINA B7
xDrive LWB) (N63T
Engine) Model Years
2013 and 2014
produced 7/9/2012 to
6/24/2014
F07 (550i xDrive Gran
Turismo) (N63T
Engine) Model Years
2013 and 2015
produced 7/2/2012 to
6/20/2014
F12 (650i xDrive
Convertible) (N63T
Engine) Model Years
2013, 2014 and 2015
produced 7/2/2012 to
6/30/2014
F16 (X6 xDrive50i)
(N63T Engine) Model
Year 2015 produced
7/26/2014 to 7/29/2015
Eligible Vehicles
To assist you in identifying those vehicles that have this component-specific extended limited warranty
coverage, the DCSnet Warranty Vehicle Inquiry has been updated with one of the the VIN and
Component-specific Vehicle Comments listed below:
© 2019 BMW of North America, LLC
For this vehicle, the engine fuel injectors limited warranty for defects in materials or
workmanship has been extended to 10 year/120,000 mile as determined from the original inservice date. This coverage is subject to the same vehicle eligibility requirements, limitations,
and exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and
Light Trucks. Please see SI B01 05 18 (DC 13 53 90 02 00).
Or:
Please see SI B01 05 18 (DC 13 53 90 02 00): For this vehicle, the engine fuel injectors limited
warranty for defects in materials or workmanship has been extended to 10 year/120,000 mile as
determined from the original in-service date. This coverage is subject to the same vehicle
eligibility requirements, limitations, and exclusions that apply to the BMW New Vehicle Limited
Warranty for Passenger Cars and Light Trucks.
Note: The 2015 Model Year F15 (X5 xDrive50i) and F16 (X6 xDrive50i) vehicles were added July
2019.
Before performing a repair and submitting a claim, first confirm that the vehicle has the above Notice
of Limited Warranty Extension in the DCSnet Warranty Inquiry Vehicle Comments section.
If you have ELW eligibility and/or coverage questions, please contact the Warranty department
through IDS by selecting Coverage, Policy, Coding Questions and Mileage Corrections prior to
performing any repair.
Information
For the eligible vehicles, BMW of North America, LLC (BMW
NA) is extending the limited warranty for
the vehicle’s engine fuel injectors to:
10 years/120,000 miles as determined by the vehicle’s original in-service date
This component-specific limited warranty
extension applies to defects in materials or
workmanship.
This coverage is subject to the same vehicle
eligibility requirements, limitations, and
exclusions that apply to the BMW New Vehicle
Limited Warranty for Passenger Cars and Light
Trucks.
Note: This bulletin is notice of a limited warranty extension. This is NOT a notice of a
Recall or Service Action.
There is no immediate repair required unless the BMW vehicle is currently experiencing this problem.
Customer Notification Letter
Even though this is NOT a Recall, BMW NA will be sending VIN-specific customer notification letters
in a phased release.
© 2019 BMW of North America, LLC
SITUATION
Engine starts poorly (hard starting), rough idle and misfires.
The Service Engine Soon (MIL) lamp is on, with the following fault codes stored in the DME:
Misfires
CAUSE
Whiles there are various possible causes, a possible cause might be that one or more fuel injectors
are leaking/defective.
CORRECTION
If misfire faults are stored DME, work though the corresponding test plans using the latest version of
ISTA.
Replace the one or more faulty fuel injectors as instructed.
Parts Information
Obtain and confirm the part numbers for your specific vehicle by entering the chassis number in either
ETK or AIR which takes into account specific equipment and/or options.
Only order these parts in the quantities needed to address customers’ vehicles that have
confirmed failures.
When ETK/EPC identifies additional part(s) that must also be replaced/installed in-conjunction with
performing this covered repair, these additional items are also covered under the terms of this
extended limited warranty.
Also refer to ETK/EPC and the ISTA repair instructions for information on one-time use
fasteners/screws and other repair-related gaskets, seals, fluid and/or lubricants that also need to be
replaced/used and claimed.
Warranty Information
The engine fuel injectors component-specific limited warranty extension to 10 years/120,000 miles
applies to eligible US-specification BMW vehicles that are registered, operated and have their covered
repair performed by an authorized BMW center in the United States (including Puerto Rico).
The existing limited warranty coverage for the whole vehicle and other components has not
changed.
This coverage supersedes the coverage that is provided under the BMW Certified Pre-Owned
Program or any BMW Group Vehicle Service Contract that applies to the vehicle.
Should the engine fuel injector(s) fail again, these component are covered by the remaining portion of
the extended limited warranty coverage period.
© 2019 BMW of North America, LLC
Non-Qualifying Repairs
Non-US specification vehicles, ineligible vehicles, eligible vehicles operated and repaired outside the
United States and Puerto Rico and/or the diagnosis and repair of other unrelated issues are not
covered under the terms of this limited warranty extension.
Qualifying Repairs - Claim Submission
Claim this work with the defect code and the applicable labor operations provided below.
Defect Code:
1353900200
F0x F1x N63T S63T US version, injector
Labor Operation:
00 00 006
Labor Allowance:
Refer to AIR
Description:
Performing vehicle test (with vehicle diagnosis
system – checking faults) (Main work)
Or:
00 00 556
Refer to AIR
Performing vehicle test (with vehicle diagnosis
system – checking faults) (Plus work)
And:
61 21 528
Refer to AIR
Connect an approved battery charger/power supply
(indicated in AIR as Charging battery)
And, as applicable:
61 00 006
Or, for ALPINA only:
Work time (WT)
Performing vehicle diagnosis – test module
61 99 000
Work time (WT)
Performing vehicle diagnosis – test module
Diagnosis
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556
instead of 00 00 006.
Refer to AIR for the corresponding flat rate unit (FRU) allowances.
And, for:
All Models, except the ALPINA B7
Replacing Injector(s) on Cylinder Bank 1 (Cylinders 1 to 4)
Labor Operation:
00 65 556
And, if applicable:
00 65 558
And, if applicable:
00 65 558
And, if applicable:
00 65 558
Labor Allowance:
Refer to AIR
Description:
Replace one injector in cylinder bank 1
2 FRU
Replace one additional injector (Two total)
2 FRU
Replace two additional injectors (Three total)
2 FRU
Replace three additional injectors (Four total)
And/or:
© 2019 BMW of North America, LLC
Replacing Injector(s) on Cylinder Bank 2 (Cylinders 5 to 8)
Labor Operation:
00 65 557
And, if applicable:
00 65 558
And, if applicable:
00 65 558
And, if applicable:
00 65 558
Labor Allowance:
Refer to AIR
Description:
Replace one injector in cylinder bank 2
2 FRU
Replace one additional injector (Two total)
2 FRU
Replace two additional injectors (Three total)
2 FRU
Replace three additional injectors (Four total)
Or:
Replacing all Eight Injectors
Labor Operation:
00 65 559
Labor Allowance:
Refer to AIR
Description:
Replace all injectors
Or, for the:
ALPINA B7
Replacing Injector(s) on Cylinder Bank 1 (Cylinders 1 to 4)
Labor Operation:
13 99 000
And, if applicable:
00 65 558
And, if applicable:
00 65 558
And, if applicable:
00 65 558
Labor Allowance:
13 FRU
Description:
Work time to replace one injector in cylinder bank 1
2 FRU
Replace one additional injector (Two total)
2 FRU
Replace two additional injectors (Three total)
2 FRU
Replace three additional injectors (Four total)
And/or:
Replacing Injector(s) on Cylinder Bank 2 (Cylinders 5 to 8)
Labor Operation:
13 99 000
And, if applicable:
00 65 558
And, if applicable:
00 65 558
And, if applicable:
00 65 558
Labor Allowance:
12 FRU
Description:
Work time to replace one injector in cylinder bank 2
2 FRU
Replace one additional injector (Two total)
2 FRU
Replace two additional injectors (Three total)
2 FRU
Replace three additional injectors (Four total)
Or:
Replacing all Eight Injectors
Labor Operation:
13 99 000
Labor Allowance:
31 FRU
Description:
Work time to replace all injectors
Note: Claim work time labor operation 13 99 000 one-time for the total FRU amount that applies.
© 2019 BMW of North America, LLC
Work time labor operation codes 61 00 006, 61 99 000 and 13 99 000 are not considered a Main labor
operations; however, they do require individual punch times and an explanations on the repair order
and in the claim comments section.
Previous Customer-pay Repairs – Limited Warranty Extension Reimbursement
Under this extended limited warranty, BMW of North America, LLC will provide reimbursement for
qualifying customer-pay repairs that were performed on an eligible vehicle prior to the release of this
component-specific limited warranty extension.
Note: The 2015 Model Year F15 (X5 xDrive50i) and F16 (X6 xDrive50i) vehicles were added July
2019.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and
exclusions that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks.
Repairs that do not qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico and/or the diagnosis and repair of other unrelated issues. This exclusion also
applies to repairs that were performed using (including those repairs that result from using) nongenuine BMW parts and/or used BMW passenger car or light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
For a customer to request reimbursement for a qualifying customer-pay repair performed either by an
authorized BMW
center or independent repair shop located in the United States (including Puerto
Rico), please have him/her submit his/her reimbursement request online at www.BMW-RP.com under
the following reference:
B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
Reimbursement Request Procedure
The online process is initiated by attaching/sending PDF files of the supporting documentation for the
prior repair.
The website and attached sample customer letter provides information as to what documentation is
needed to be supplied to support a prior repair.
The letter also includes alternative methods to request reimbursement, either through the mail or by
fax as described below:
BMW Customer Reimbursement Center
Attention: B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.
© 2019 BMW of North America, LLC
BMW Owner/Operator Inquiries and Assistance
For all other questions, please contact the BMW’s Customer Relations and Services via email at
[email protected] or via telephone at 1-800-831-1117.
© 2019 BMW of North America, LLC
Month YYYY
This “Important Limited Warranty Information” applies to the BMW vehicle with the Vehicle
Identification Number (VIN) of WBANB535X01234567.
Dear BMW Owner/Lessee:
BMW is committed to delivering the ultimate in product satisfaction to our customers.
Towards that end, BMW is extending the limited warranty for the engine’s:
Fuel Injectors
On the above-referenced vehicle to:
10 years/120,000 miles as determined by your vehicle’s original in-service date.
This “component-specific” limited warranty extension applies to defects in materials or workmanship. This
coverage is subject to the same vehicle eligibility requirements, limitations, and exclusions that apply to the
BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
This is notice of a “limited warranty extension.” This is not a notice of a Recall or Service
Action.
If a repair to this component is required, please contact your nearest authorized BMW center in the United
States or Puerto Rico to schedule an appointment. Your authorized BMW
center will determine the
vehicle’s eligibility and review the scope of repairs that are covered by this component-specific limited
warranty extension(s).
After vehicle inspection and diagnosis, eligible repair work will be performed by the authorized BMW center
in the United States (including Puerto Rico) free of charge.
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States
and Puerto Rico and/or the diagnosis and repair of other unrelated issues are not covered by this limited
warranty extension. This exclusion applies to repairs, including consequential, that were performed using
non-genuine BMW parts and/or used passenger car or light truck parts.
The integrity of our products is essential to BMW’s success and our customers’ trust. We are determined
to exceed your expectations and hope this warranty extension further enhances your ownership
experience.
Sincerely,
BMW of North America, LLC
B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
Previous Customer-pay Repairs – Limited Warranty Extension Reimbursement
BMW
of North America, LLC
Month YYYY
VIN WBANB535X01234567
Under these extended limited warranties, BMW of North America, LLC (“BMW NA”) will provide
reimbursement for “qualifying customer-pay repairs” that were performed on an eligible vehicle prior to
the release of these component-specific limited warranty extensions.
Customer-pay repairs are subject to the applicable vehicle and coverage eligibility requirements, exclusions
and limitations that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Repairs that do not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United States
and Puerto Rico and/or the diagnosis and repair of other unrelated issues. This exclusion applies to repairs,
including consequential, that were performed using non-genuine BMW
parts and/or used passenger car or
light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
If you previously had a “qualifying customer-pay repair” performed either by an authorized BMW center or
independent repair shop located in the United States (including Puerto Rico), please submit your
reimbursement request “online” at www.BMW-RP.com under the following reference:
Covered Component Code
B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
To initiate the online process, you will be asked to attach PDF files of the required documentation as
outlined in the reimbursement checklist on the next page.
Alternative Method to Request Reimbursement
Alternatively, you may mail or fax your request and documentation to:
BMW Customer Reimbursement Center
Attention: B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
P.O. Box 561089
Dallas, TX 75356
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please
call 1-844-857-0341.
For all other questions, please contact BMW’s Customer Relations and Services via email at
[email protected] or via telephone at 1-800-831-1117.
Please have your 17-character Vehicle Identification Number (VIN) available and include the VIN with all
communications.
B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
N63T Engine Fuel Injectors: Limited Warranty Extension to 10 Years/120,000 Miles
Previous Customer-pay Repair Reimbursement – Documentation Checklist
BMW of North America, LLC
Reimbursement is available to the BMW Owner/Lessee who incurred the expense.
When submitting a reimbursement for a previous repair, please provide legible copies of the following
documentation and include your VIN, name, address and your preferred contact telephone number(s):
Repair Order (RO) or Invoice
This document should include the following information:
Customer name and address
Vehicle Identification Number (“VIN”)
The date of repair
The mileage when the repair was performed
Itemized breakdown of the labor charges for all repairs* including diagnosis
Itemized breakdown of the parts, including any miscellaneous items, billed for all repairs*
*For repair orders containing multiple repair line items, only the specific line item expenses that relate to
the component that is covered by this extended limited warranty will be considered for reimbursement.
Proof of Payment
Please provide a copy of at least one of the following items as valid proof of payment:
Repair order (RO)/invoice stamped and dated as “PAID”
Copy of a cancelled check
Copy of a signed credit/debit card receipt
Copy of a credit/debit card statement
Determining if an eligible vehicle’s repair qualifies for reimbursement:
Please use the following questions to review your repair order documentation prior to submitting a
reimbursement request:
1. Why was the vehicle brought into the repair facility?
2. What was the repair facility's diagnosis?
3. What did the repair facility do to correct the concern and does it qualify?
B-ELWR 2018 N63T Engine Fuel Injectors 10Y120M
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B010518
Replacement Service Bulletin Number:
MFR Communication Date: 2019-07-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




