NHTSA ID Number: 10162767
Manufacturer Communication Number: L-SB-0031-19
TSB/Document Date: 2019-07-15
Summary
TSB: This bulletin contains the vehicle specific pre-delivery services for 2020 model year LC500 and LC500h vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.
L-SB-0031-19
June 19, 2019
2020 LC500, LC500h Pre-Delivery Service (PDS)
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2020
LC500, LC500H
ADDITIONAL INFORMATION
Introduction
This bulletin contains the vehicle specific pre-delivery services for 2020 model year LC500 and
LC500h vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for
services to be performed.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Procedures
Front License Plate and Mounting Bracket Installation ............................................................ 2
D/C Cut Fuse Installation .......................................................................................................... 4
Front and Rear Emergency Towing Eyelet Removal ............................................................... 6
Front and Rear Emergency Towing Eyelet Hole Cover Installation......................................... 7
Front Wheel Opening Extension Pad Installation ..................................................................... 8
© 2019 Lexus, a division of Toyota
Motor Sales, USA
Page 1 of 8
L-SB-0031-19
June 19, 2019
Page 2 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation
The front license plate mounting bracket and two self-tapping screws for the 2020 model year
LC500 and LC500h are stored in the luggage compartment. Install the license plate and
mounting bracket during PDS according to the following procedure.
1. Locate the front license plate mounting
bracket over the radiator grille.
Figure 1.
1
B
B
A
A
2. Align holes “A” of the mounting bracket
with the dimples on the front bumper cover.
Mark the location of holes “B” on the front
bumper cover.
NOTICE
Do NOT drill into the dimples on the front
bumper cover.
1
NOTE
2
Holes “A” are used to install the
mounting bracket onto the radiator grille.
3
Holes “B” are used to install the front
license plate onto the mounting bracket.
1
Mounting Bracket
2
Dim ple
3
3. Screw the two self-tapping screws directly
into the dimples to install the front license
plate mounting bracket.
NOTICE
Do NOT overtighten the
self-tapping screws.
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 3 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
4. Install the front license plate onto the
mounting bracket using two bolts of
noncorroding type with the following
dimensions (as shown in Figure 3).
Figure 2.
1
Nominal Length: 15.0 mm (0.59 in.)
Diameter: 6.0 mm (0.24 in.)
2
1
Front License Plate
2
Figure 3.
2
1
1
Nom inal Length
2
Diam eter
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 4 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
D/C Cut Fuse Installation
To minimize battery discharge during transportation and storage, the D/C cut fuses (30A) have
been removed at the assembly plant and temporarily stored in the blank spaces of the relay
block in the engine compartment.
During PDS, remove the D/C cut fuses (30A) from the blank spaces of the relay block in the
engine compartment and install them in the locations shown.
Figure 4. Hybrid Models
1
Relay Block
3
2
Rem ove These D/C Cut (30A) Fuses
Install D/C Cut Fuses (30A) Here (Original Location)
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 5 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
D/C Cut Fuse Installation (continued)
Figure 5. Gasoline Models
1
Relay Block
3
2
Rem ove These D/C Cut (30A) Fuses
Install D/C Cut Fuses (30A) Here (Original Location)
NOTE
While the vehicle is stored at the dealership, disconnect the negative (–) battery terminal to prevent
battery discharge. Refer to Service Bulletin No. L-SB-0013-19, Battery Maintenance During PDS.
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 6 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal
1. Remove the front and rear emergency
towing eyelets from the front and rear
bumpers by turning them counterclockwise.
Figure 6.
HINT
If it is difficult to loosen the front emergency
towing eyelet, use a steel bar.
1
2
2. Place one of the removed emergency
towing eyelets into the luggage tray in the
luggage compartment.
1
Front Em ergency Towing Eyelet
2
Rear Em ergency Towing Eyelet
Figure 7.
HINT
Dispose of the other removed emergency
towing eyelets.
1
1
Em ergency Towing Eyelet
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 7 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Hole Cover Installation
1. Install the front and rear emergency towing
eyelet hole covers, which are stored in the
glove compartment, onto the front and
rear bumpers.
Figure 8.
B
A. Insert the arrow-shaped part of the
emergency towing eyelet hole cover “A”
into the eyelet hole “B” as shown.
B. Install the emergency towing eyelet
hole cover to the hole of the bumper.
1
z
HINT
Make sure the front emergency towing
eyelet hole cover is installed in the front,
and the rear emergency towing eyelet
hole cover is installed in the rear.
A
B
A
2
z
A
Arrow-shaped Part
B
Eyelet Hole
1
Front Em ergency Towing Eyelet Hole Cover
2
Rear Em ergency Towing Eyelet Hole Cover
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0031-19
June 19, 2019
Page 8 of 8
2020 LC500, LC500h Pre-Delivery Service (PDS)
Front Wheel Opening Extension Pad Installation
The front wheel opening extension pad set (right and left front wheel opening extension pads
and four self-tapping screws) is placed in the luggage compartment at the assembly plant to
avoid damage in transit.
NOTE
Use the same procedure for the right-hand side and left-hand side. The procedure listed below is for the
left-hand side. There is a distinguishable mark on each pad indicating the left and right side pads.
Place the left front wheel opening extension
pad on the installation position and tighten the
four self-tapping screws.
Figure 9.
1
1
Front Wheel Opening Extension Pad
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L-SB-0031-19
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.