To:
Subject:
Date:
Pages

L636A.04.18

Official After Sales Network
Update ECU 5F
21 February 2019
17

Campaign code:
L636-A.04.18

Example

Campaign description:
This campaign includes the ECU 5F.
Model:
Urus
Model year:
From 2019
Special or Limited Versions:
All
Markets:
All
VIN identification:
From VIN KLA00330 to KLA01796

ATTENTION!
Only for the markets: China, Hong Kong, Japan, Macao,
Singapore, Taiwan and Thailand, the VIN range is extended to the VIN KLA02603.
Warning: Before starting with the repair, log to the Warranty portal and check through VIN Info:






Rev.06

Before to execute the update of the ECU 5F SW
verify if this update is necessary for the vehicle.
Identify the ECU 5F. From the guided function of
the 5F run the “5F - Read identification data”. If
the identified SW is aligned with the SW target, as
shown in the table of the step 5, it is possible to
skip to the step C and step D.

NOTE:
Procedure A will be available only when the instructions
require to carry out a preliminary control to determine
whether or not a vehicle needs to be updated.

Information to the field:

As a result of continuous product monitoring, Automobili Lamborghini S.p.A. has released a new software update for entertainment instrument cluster of
Urus. This release contains improvement of ECU 5F
graphics, 5GHz connection and text tool.
Operations:
The instructions herein provided include 2 operations:
- Operation B: SW and ZDC update
- Operation C: ZDC update

The vehicle is effectively involved by these bulletin instructions; some cars may not be included
even when they are in the VIN range.

Field Solution:

The procedure identified by a letter (e.g. A, B or
C….etc. whose differences are explained below in
this bulletin), taking care to order and use the parts
corresponding to the assigned procedure

Spare parts:
Order the following part number which are connected to
the operation required:
- Operation B, ECU 5F update (SW and ZDC update)
- Operation C, ZDC update

Update the car following the herein reported instructions.

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

1/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

P/N

Description

Q

n/n

n/n

0

Replaced parts management:
Store properly and tagged the parts replaced with bar code
form for their identification during Area Manager visits.
Labour time:
- Operation B: 1 hour
- Operation C: 0.5 hour
Substituted former Bulletins:
None.

ATTENTION!
Attach all documents produced during the vehicle visit
that show evidence of the work performed such as repair order, software protocols or acquisitions…etc.;
the lack of one or more of those, may deny the reimbursement.
Remember to fill all data in the section “Service and Recall Campaign” in the Warranty booklet of the vehicle as
shown below.

Warranty Claim instructions:
To claim the reimbursement log into the warranty system
management on the Lamborghini Portal and consults the
manual “W.Claim “ available on the portal for the download .
Select the desired campaign and go on with the claim insertion, read carefully the windows message content and
choose the option button corresponding to the operation
performed .
Necessary tools/material:
P/N
Description
-

On the base of the chosen option the reimbursement will
be:
-

OPTION B – ECU 5F update (SW and ZDC update)
manpower: 1 hours
spare parts: none

-

OPTION C – ZDC update
manpower: 0.5 hours
spare parts: none

Rev.06

Q

IMPORTANT:
Before you follow the instructions in this service campaign, you need to install the SD-Creator program. The
instructions for installing SD Creator are contained in the
bulletin: "BI.09.17_ [ENG] _SD-Creator installation
package procedures". Follow the instructions in the
"BI.25.18" information bulletin to upgrade the SD-Creator
to the latest version available.

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

2/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

IMPORTANT:


Automobili Lamborghini S.p.A. informs that the time
necessary to download the software from SD-Creator
is to be considered only in the case of execution of the
Operation B. This time is not to be considered refundable on a case by case basis, being exceptional and
acceptable with the extra-time already included in the
time given for operation B.



Operation B and operation C describe two independent actions, for this reason the times for the execution
of this campaign cannot therefore be added

Rev.06

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

3/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

Preliminary operations:
1. Make sure to be recently synchronized with Mirror
server by checking the Last Sync date under:
http://mirrorserver/maintenance/diagnosis.py
or directly insterting your Btac-box IP address:
http://[IP_address]/maintenance/diagnosis.py

The instructions contained in this bulletin are based on
ODIS Service diagnosis software updated to release 5.0.3
and database Lamborghini 2.13.3, or following (please
refer to BI.07.15 and be sure that ODIS Service on your
laptop is up-to-date).

if you have not previously set up the mirror-server IP
alias.
(e.g. http://12.34.567.890/maintenance/diagnosis.py)

IMPORTANT:
Make sure the last synchronization has been done after the 18th of October 2018.
2. Please connect a suitable battery charger to the recharge points available in the engine bonnet (left side
of the car), refer to the following picture.

Rev.06

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

4/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

Work instructions:
The update procedure here described includes the following steps:
A. Download SW from SD-Creator;
B. ECU 5F SW Update;
C. ECU 5F ZDC Update;
D. Erase fault memories;
E. Confirmation of installation.
F. Erase fault memories.

5. In the main page of SD-Creator you shall fill out the
Model and Part Number fields:

NOTE:
Ensure the key ON during the whole update procedure.
Start a diagnostic session with ODIS service and keep the
diagnostic interface connected to the OBD socket and do
not close the ODIS Service program or use it for other
purposes. Once the software update has been executed it is
necessary to complete the operation in ODIS.

A. Download SW from SD-Creator:
3. In order to download the softwares necessary for the
update procedure, open on your laptop SD-Creator by
a double click on the program icon.

I.
II.
4. When the program starts, fill in the Windows screen
fields as explained in the “BI-09.17_ [ENG] _ SDCreator installation package procedures".

Select the Model, (Urus);
Insert the USB memory stick and type the Part
Number specific for your destination market,
make reference on the table at the point ;

Select the Part Number related to the destination market of
your vehicle.

61653001386

SW
target
9812

ECE, ECE DAB, RdW, RdW DAB

61653001388

9812

NAR and NAR Sirius

61653001417

9818

Taiwan, Japan and China

Part Number

Rev.06

Destination Market

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

5/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

Through the Part Number selected, the version of the ECU
5F software suitable to the selected market will be downloaded. Then, click “Search”. The following image is only
for example purposes:

6. If the entered part number is correct, following the
search, will be shown the model name and the required size of the USB memory stick to generate the
software. E.g.:

7. Follow this instructions for the download of both
softwares using the part numbers indicated at the point
II and III. Click the Start Button,
,
to start the software download process.The software
will be automatically saved in the USB memory stick.

IMPORTANT:
Before You Begin Creating Your Software!
The process involves formatting the USB memory and deleting the files inside it.
In order to do not lose your data, it is advisable to use
empty USB memory.
Make sure that the available storage space is grater or at
least equal to the the size required by SD-Creator, as enucleated at the point 6.

ATTENTION:
If the error shown in the following image occurs in the
download from SD-Creator, perform the instructions at
the end of this document, in Trouble shooting,section viii.

Rev.06

8. At the end of the process, green icons will appear on
the right and a positive feedback will be displayed indicating the success of the operation.
Click on the bar “
” in order to finish
the download process. The USB memory stick is automatically unplugged from your laptop.

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

6/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

10. Move on the car and insert the USB memory stick
containing the downloaded software in one of the USB
ports under the armrest in the central tunnel.

9. To verify the success of the operation, extract and reinsert the USB stick and make sure that the software
required is present. The following image is an example concerning the folders created for the ECU 5F.

At this point the downloaded software is available on
the USB memory stick and ready to be flashed on the
car.

Rev.06

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[05]

7/17

L636A.04.18

To:
Subject:
Date:
Pages

Official After Sales Network
Update ECU 5F
21 February 2019
17

B. ECU 5F SW Update:
11. Before to execute the update of the ECU 5F SW verify
if this update is necessary for the vehicle. Identify the
ECU 5F. From the guided function of the 5F run the
“5F - Read identification data”. If the identified SW is
aligned with the SW target, as shown in the table of
the step 5, it is possible to skip to the step C and step
D.

12. To run the software update you need to access the
“Red Menu”. To access it, press with two fingers on
the ECU 5F screen in the upper right corner and keep
it pressed for few seconds. The ECU 5F display turns
off momentarily. Wait for the display to restart automatically.
13. When the ECU 5F is restarted, the Red Menu will be
displayed. Using the main knob, select "Update".

NOTE:
Using the main knob it is possible to navigate the Red
Menù. Turn it to scroll the menu and push to select an item.

IMPORTANT:
In case the update of the ECU 5F SW is not needed please
refer only to the time indicated for the ZDC update, Operation C.

14. Insert the USB memory stick in one of the appropriate
ports located on the central tunnel under the armrest
(the related row become evident). Select it to start the
update.

Rev.06

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.