NHTSA ID Number: 10162022
Manufacturer Communication Number: SA-010-19
TSB/Document Date: 2019-07-02
Summary
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES: The new 2019 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. PDI fuse, Front Wiper Service Caution, i-ACTIVSENSE Switch, Traffic Sign Recognition (TSR), MAZDA
CONNECT Power Function, MAZDA CONNECT Center Display View, In-Vehicle Digital Owner's Manual, Navigation System, SIRIUSXM Data Service, Power Door Locks, Auxiliary Key, Transmitter Battery Saving Function, Keyless Entry Using Auxiliary Key, Rear Door Child Safety Locks Operation, Link Seat & Climate Control Temperatures, Seat Warmer Turns OFF, Electric Parking Brake (EPB), A/C Air Temperature Is Not Cold, Tire Pressure Monitoring System (TPMS), Condition Based Maintenance, M-MDS (MDARS) &, Part Replacement.
Service Alert
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED
FEATURES
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
BULLETIN NOTES
This Service Alert supersedes the previously issued Service Alert(s) listed below: The changes are noted in
Red.
Previous Service
Alert(s):
SA-010/19
Date(s) Issued:
06/07/19, 05/09/19,05/02/19, 04/25/19,04/11/19, 03/29/19, 03/21/19,
03/15/19,03/08/19, 03/06/19, 03/05/19, 02/25/19
APPLICABLE MODEL(S)/VINS
2019 Mazda3
DESCRIPTION
The new 2019 Mazda3 has new and revised features that are different from previous models, and may be
difficult to understand. This Service Alert provides valuable information to support potential dealer and
customer concerns.
Index
PDI fuse
Front Wiper Service Caution
i-ACTIVSENSE Switch
Traffic Sign Recognition (TSR)
MAZDA CONNECT Power Function
MAZDA CONNECT Center Display View
In-Vehicle Digital Owner's Manual
Navigation System
SIRIUSXM Data Service
Power Door Locks
Auxiliary Key
Transmitter Battery Saving Function
Keyless Entry Using Auxiliary Key
Rear Door Child Safety Locks Operation
Link Seat & Climate Control Temperatures
Seat Warmer Turns OFF
Page 1 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Electric Parking Brake (EPB)
A/C Air Temperature Is Not Cold
Tire Pressure Monitoring System (TPMS)
Condition Based Maintenance
M-MDS (MDARS)
Part Replacement
Item
Service Information
Page 2 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Fuse Block
Fuse to be Installed at PDI (JM1 = Japan built)
(Engine Compartment)
1. There is only one fuse removed at the factory that should be
installed at PDI. It is fuse F27 (25A). The fuse is stored in the lid of
the fuse box with the spare fuses.
2. The current PDI form is wrong. It states there are two (2) fuses
removed (F46 and F50) that should be installed. The form is being
updated with this change.
Fuse to be Installed at PDI (3MZ = Mexico built)
Fuse Block
1. There are two fuses removed at the factory that should be
(Left Side)
installed at PDI. They are fuse F27 (25A) and F15 (15A).
2. NOTE: On some vehicles, fuse F13 (15A) is being removed
instead of F15 at the factory. This causes the Commander switch
to be inoperative.
3. The F27 (25A) fuse is stored in the lid of the fuse box with the
spare fuses.
4. The F15 (15A) fuse is stored in the lower panel compartment on
the left side of the steering wheel.
5. Go to SA-017/19 for details.
Page 3 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Front Wiper Service Caution
1. Wiper arm park position is located under the hood.
2. When servicing front wipers, front wiper service mode is required
or damage to wiper arms may occur (see Service Information).
3. If wiper arms are replaced, M-MDS is needed for wiper arm
adjustment (see Service Information)
4. DO NOT use wiper arms as markers when in dealer inventory.
See Owner's Manual ->
Maintenance and Care >
Replacing Windshield Wiper
Blades
MGSS: WINDSHIELD WIPER ARM
AND BLADE ADJUSTMENT
Page 4 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
i-ACTIVSENSE Switch (New)
Activated Status: Green
When iACTIVSENSE
is in normal
operating
status, the
instrument
cluster iACTIVSENSE
indicator is
green.
See Owner's Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE
Stand-by Status: White
When iACTIVSENSE
has an
environmen
tal fault,
such as a
dirty
windshield
or driving
into the
sun, the
instrument
cluster iACTIVSENSE
Page 5 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
indicator is
white.
Warning Status: Amber
When iACTIVSENSE
has a fault
that needs
diagnosis by
a
dealership,
the
instrument
cluster iACTIVSENSE
indicator is
amber.
When the iACTIVSENSE
switch is
pressed and
released
immediately Partially Cancelled Status:
INDICATOR IS TURNED OFF
, the
following
systems are
canceled.
1. Lane
Departu
re
Warning
System
(LDWS)
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Page 6 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
To turn the
system back
to
"Activated
Status" ,
press the iACTIVSENSE
switch once.
NOTE: If
MRCC is
used, the
system will
also return
to
"Activated
Status".
When the iACTIVSENSE
switch is
pressed and
held, all
Fully Cancelled Status:
systems are
I-ACTIVSENSE INDICATOR IS OFF
canceled.
SBS OFF WARNING LIGHT IS ON
1. Lane
Departu
re
Warning
System
(LDWS)
Page 7 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
6. Smart
Brake
Support
(SBS)
7. Smart
Brake
Support
[Rear]
(SBS-R)
8. Smart
Brake
Support
[Rear
Crossing
] (SBS
RC)
Page 8 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Traffic Sign Recognition (TSR) *
Note:
1. TSR function is only available with a dealer installed in-vehicle
navigation system accessory.
2. TSR function requires Forward Sensing Camera (FSC) recognition
or navigation SD card map data when the vehicle is driven.**
3. TSR function is not displayed in the Active Driving Display.
4. TSR function is disabled when Apple CarPlay™ or Android Auto™ is
connected.
* Some models
See Owner's Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE -> Traffic Sign
Recognition System (TSR)
MAZDA CONNECT
Speed Limit Alert OFF
(Default Setting)
No Function
MGSS: Traffic Sign Recognition
(TSR)
Driving under the speed limit
Page 9 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Driving over the speed limit
Stop sign and Speed Limit recognized
Do Not Enter sign and Speed Limit
recognized
Page 10 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT
Speed Limit Alert ON
(Customer Setting
Change)
Excessive Speed Warning
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Page 11 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT New Power Off Function
See Owner's Manual ->
Interior Features -> Mazda
Connect
1. Audio Mute - Short press the volume knob (Press again to cancel)
2. Power Off - Press and hold the volume knob (Press and hold again MGSS: ENTERTAINMENT SYSTEM
to Power ON)
In-vehicle Owner's Manual
installation
Page 12 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT Center Display View
The rear-view monitor and Android Auto do not utilize all of the
center display space.
Function
Display
MAZDA
CONNECT FM
Apple CarPlay
Android Auto
Rear View
Monitor
Page 13 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-010-19
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS：The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER：Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS：Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE：Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth, Peterbilt, Volvo, Mack, International, and other commercial truck brands, plus Cummins, Caterpillar, Detroit, Paccar, and Navistar diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE：This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner, Kenworth, Peterbilt, Volvo, International, Detroit, Cummins, Paccar, Allison, Eaton, Bendix, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed
- 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins, Paccar, Caterpillar, Detroit, and Freightliner—making it a versatile semi truck scanner for managing any diverse fleet.
- 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.