NHTSA ID Number: 10162022
Manufacturer Communication Number: SA-010-19
TSB/Document Date: 2019-07-02
Summary
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES: The new 2019 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. PDI fuse, Front Wiper Service Caution, i-ACTIVSENSE Switch, Traffic Sign Recognition (TSR), MAZDA
CONNECT Power Function, MAZDA CONNECT Center Display View, In-Vehicle Digital Owner's Manual, Navigation System, SIRIUSXM Data Service, Power Door Locks, Auxiliary Key, Transmitter Battery Saving Function, Keyless Entry Using Auxiliary Key, Rear Door Child Safety Locks Operation, Link Seat & Climate Control Temperatures, Seat Warmer Turns OFF, Electric Parking Brake (EPB), A/C Air Temperature Is Not Cold, Tire Pressure Monitoring System (TPMS), Condition Based Maintenance, M-MDS (MDARS) &, Part Replacement.
Service Alert
Mazda North American Operations
Irvine, CA 92618-2922
Subject:
2019 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED
FEATURES
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
BULLETIN NOTES
This Service Alert supersedes the previously issued Service Alert(s) listed below: The changes are noted in
Red.
Previous Service
Alert(s):
SA-010/19
Date(s) Issued:
06/07/19, 05/09/19,05/02/19, 04/25/19,04/11/19, 03/29/19, 03/21/19,
03/15/19,03/08/19, 03/06/19, 03/05/19, 02/25/19
APPLICABLE MODEL(S)/VINS
2019 Mazda3
DESCRIPTION
The new 2019 Mazda3 has new and revised features that are different from previous models, and may be
difficult to understand. This Service Alert provides valuable information to support potential dealer and
customer concerns.
Index
PDI fuse
Front Wiper Service Caution
i-ACTIVSENSE Switch
Traffic Sign Recognition (TSR)
MAZDA CONNECT Power Function
MAZDA CONNECT Center Display View
In-Vehicle Digital Owner's Manual
Navigation System
SIRIUSXM Data Service
Power Door Locks
Auxiliary Key
Transmitter Battery Saving Function
Keyless Entry Using Auxiliary Key
Rear Door Child Safety Locks Operation
Link Seat & Climate Control Temperatures
Seat Warmer Turns OFF
Page 1 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Electric Parking Brake (EPB)
A/C Air Temperature Is Not Cold
Tire Pressure Monitoring System (TPMS)
Condition Based Maintenance
M-MDS (MDARS)
Part Replacement
Item
Service Information
Page 2 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Fuse Block
Fuse to be Installed at PDI (JM1 = Japan built)
(Engine Compartment)
1. There is only one fuse removed at the factory that should be
installed at PDI. It is fuse F27 (25A). The fuse is stored in the lid of
the fuse box with the spare fuses.
2. The current PDI form is wrong. It states there are two (2) fuses
removed (F46 and F50) that should be installed. The form is being
updated with this change.
Fuse to be Installed at PDI (3MZ = Mexico built)
Fuse Block
1. There are two fuses removed at the factory that should be
(Left Side)
installed at PDI. They are fuse F27 (25A) and F15 (15A).
2. NOTE: On some vehicles, fuse F13 (15A) is being removed
instead of F15 at the factory. This causes the Commander switch
to be inoperative.
3. The F27 (25A) fuse is stored in the lid of the fuse box with the
spare fuses.
4. The F15 (15A) fuse is stored in the lower panel compartment on
the left side of the steering wheel.
5. Go to SA-017/19 for details.
Page 3 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Front Wiper Service Caution
1. Wiper arm park position is located under the hood.
2. When servicing front wipers, front wiper service mode is required
or damage to wiper arms may occur (see Service Information).
3. If wiper arms are replaced, M-MDS is needed for wiper arm
adjustment (see Service Information)
4. DO NOT use wiper arms as markers when in dealer inventory.
See Owner's Manual ->
Maintenance and Care >
Replacing Windshield Wiper
Blades
MGSS: WINDSHIELD WIPER ARM
AND BLADE ADJUSTMENT
Page 4 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
i-ACTIVSENSE Switch (New)
Activated Status: Green
When iACTIVSENSE
is in normal
operating
status, the
instrument
cluster iACTIVSENSE
indicator is
green.
See Owner's Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE
Stand-by Status: White
When iACTIVSENSE
has an
environmen
tal fault,
such as a
dirty
windshield
or driving
into the
sun, the
instrument
cluster iACTIVSENSE
Page 5 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
indicator is
white.
Warning Status: Amber
When iACTIVSENSE
has a fault
that needs
diagnosis by
a
dealership,
the
instrument
cluster iACTIVSENSE
indicator is
amber.
When the iACTIVSENSE
switch is
pressed and
released
immediately Partially Cancelled Status:
INDICATOR IS TURNED OFF
, the
following
systems are
canceled.
1. Lane
Departu
re
Warning
System
(LDWS)
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Page 6 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
To turn the
system back
to
"Activated
Status" ,
press the iACTIVSENSE
switch once.
NOTE: If
MRCC is
used, the
system will
also return
to
"Activated
Status".
When the iACTIVSENSE
switch is
pressed and
held, all
Fully Cancelled Status:
systems are
I-ACTIVSENSE INDICATOR IS OFF
canceled.
SBS OFF WARNING LIGHT IS ON
1. Lane
Departu
re
Warning
System
(LDWS)
Page 7 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
2. Blind
Spot
Monitor
ing
(BSM)
3. Distanc
e Speed
Alert
(DSA)
4. Rear
Cross
Traffic
Alert
(RCTA)
5. Lanekeep
Assist
System
(LAS)
6. Smart
Brake
Support
(SBS)
7. Smart
Brake
Support
[Rear]
(SBS-R)
8. Smart
Brake
Support
[Rear
Crossing
] (SBS
RC)
Page 8 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Traffic Sign Recognition (TSR) *
Note:
1. TSR function is only available with a dealer installed in-vehicle
navigation system accessory.
2. TSR function requires Forward Sensing Camera (FSC) recognition
or navigation SD card map data when the vehicle is driven.**
3. TSR function is not displayed in the Active Driving Display.
4. TSR function is disabled when Apple CarPlay™ or Android Auto™ is
connected.
* Some models
See Owner's Manual -> When
Driving -> i-ACTIVSENSE -> iACTIVSENSE -> Traffic Sign
Recognition System (TSR)
MAZDA CONNECT
Speed Limit Alert OFF
(Default Setting)
No Function
MGSS: Traffic Sign Recognition
(TSR)
Driving under the speed limit
Page 9 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
Driving over the speed limit
Stop sign and Speed Limit recognized
Do Not Enter sign and Speed Limit
recognized
Page 10 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT
Speed Limit Alert ON
(Customer Setting
Change)
Excessive Speed Warning
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Page 11 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT New Power Off Function
See Owner's Manual ->
Interior Features -> Mazda
Connect
1. Audio Mute - Short press the volume knob (Press again to cancel)
2. Power Off - Press and hold the volume knob (Press and hold again MGSS: ENTERTAINMENT SYSTEM
to Power ON)
In-vehicle Owner's Manual
installation
Page 12 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
Last Issued: 06/13/2019
MAZDA CONNECT Center Display View
The rear-view monitor and Android Auto do not utilize all of the
center display space.
Function
Display
MAZDA
CONNECT FM
Apple CarPlay
Android Auto
Rear View
Monitor
Page 13 of 26
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-010/19
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-010-19
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.