2019

Q8
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Perform any open campaigns*
 Run Total PDI Test*
If vehicle doesn’t deactivate Vehicle Transport Mode or Flight
Mode, please follow the steps below

 Deactivate Flight Mode for Telematics Control Unit (ConBox)
using Self-Diagnosis Adaptation*
Note: The VAS 6154 diagnostic head is required. See Technician Reference Document or TSB 2052299
 Deactivate air suspension loading mode (if equipped)*
 Set service reminder*
Exterior
 Check all key buttons and features*

 Verify tool kit is installed securely in luggage compartment
 Check battery clamps for proper torque*
 Set spare tire pressure*
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)

 Check all doors for proper power closing (if equipped)*

 Verify operation of heated/ventilated and massaging seats
(if equipped)*

 Inspect exterior for damage, dings, dents and surface
scratches

 Verify operation of manual folding 2nd row seats

Lighting and Windshield

 Inspect operation of all power outlets*

 Test exterior lighting functions

 Check panoramic sunroof and sunshade operation*

 Test front washers (and headlight washers if equipped)*

 Verify operation of rear side sunshade operation (if
equipped)

 Install wiper blades
Trunk Inspection
 Verify power tailgate is operational and set to maximum
opening height (if equipped)*

 Verify proper operation of climate control*

 Verify operation of front Passenger Occupant Detection
System
Settings
 Verify operation of MMI® touch screens, upper and lower

 Verify operation of emergency release handle
Effective 1-14-2019-US
Version 1.2

PRE-DELIVERY INSPECTION (PDI) | 1

2019

Q8
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*

 Verify transmission operation, including shift paddles (if
equipped)

 Verify and set language and measurement units*

 Test drive vehicle applying brakes several times*

 Verify Speech Dialog System is operating*

 Check adaptive air suspension in all positions (if equipped)

 Set “Music volume while parking” to medium*

 Check steering/tire alignment

 Set dealership location in navigation*

 Check for squeaks, rattles and wind noise

 Turn off Manual Speed Warning (if equipped)*

 Calibrate rear view mirror*

Media / Radio / SAT

 Verify quality of radio reception in AM/FM/SiriusXM® bands

 Verify operation of aux. input
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of slot
 Program the presets to local stations
 Verify HD Radio is turned “off”*
 Verify Audi phone box sticker and registration information is
present (if equipped). See TSB 2051720

Driver Assistance
 Verify all cruise control functions
 Verify cruise control/ACC with Stop & Go functionality (if
equipped), which includes the following:
 Adaptive Cruise Assist
 Turn Assist
 Intersection Assistant

Audi connect® (USA ONLY)

 Traffic Jam Assist

 Turn on the Wi-Fi® hotspot (if equipped)*

 Predictive Efficiency Assist

 Check Wi-Fi® hotspot visibility. No data available at PDI due
to dealer demo mode (if equipped)*

 Active lane assist with emergency assistant

 Enable satellite map for navigation (if equipped)*
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instructions)

 Traffic sign recognition
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Verify operation of night vision camera (if equipped)
 Verify operation of parking system*

 Check underside of vehicle for fluid leaks and loose components

 Verify all vehicle Head-up display functionality (if equipped)*

 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Activate NAV and follow directions back to dealership

 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*

 Verify operation of High-beam assist (if equipped)

Post-Road Test Inspection

 Inspect wheel bolts for proper torque*

 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Check service interval and verify correct interval is displayed

Driving Performance

 Check all fluid levels and top off if necessary

 Check horn operation

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*

Effective 1-14-2019-US
Version 1.2

 Check engine oil level*

 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**

PRE-DELIVERY INSPECTION (PDI) | 2

2019

Q8
Audi Pre-Delivery Inspection

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 1-14-2019-US
Version 1.2

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 3