2019

Q7
Audi Technician Report
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 All PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do not use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests.
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Verify tool kit is installed securely in luggage compartment

 Perform any open campaigns*

 Verify tire repair kit and compressor are present

 Run Total PDI Test*
If vehicle doesn’t deactivate Vehicle Transport Mode or Flight
Mode, please follow the steps below

 Verify inflatable spare tire and compressor are present (if
applicable)

 Deactivate Flight Mode for Telematics Control Unit (ConBox)
using Self-Diagnosis Adaptation*
Note: The VAS 6154 diagnostic head is required. See Technician Reference Document or TSB 2052299
 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
 Set service reminder*

 Check battery clamps for proper torque*
Interior
 Verify operation of luggage cover
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*

Exterior

 Verify operation of all interior lights

 Check all key buttons and features*

 Check heated steering wheel operation (if equipped)

 Check all doors for proper power closing (if equipped)*

 Verify operation heated/ventilated and massaging seats (if
equipped)*

 Inspect exterior for damage, dings, dents and surface
scratches
Lighting and Windshield
 Test exterior lighting functions
 Test front washers (and headlight washers if equipped)*
 Install wiper blades

 Verify SOS button is green and Roadside Assistance Button LED
will remain off (if equipped). Reference TSB 2052299 if issues

occur
 Verify operation of manual folding 2nd row and power folding
3rd row seats*
 Verify proper operation of climate control*
 Inspect operation of all power outlets*

Trunk Inspection

 Check panoramic sunroof and sunshade operation*

 Verify power tailgate is operational and set to maximum
opening height (if equipped)*

 Verify the glove compartment opens and closes properly

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
Effective 1-14-2019-US
Version 1.2

 Verify operation of front Passenger Occupant Detection System
 Verify operation of rear side manual sunshades (if equipped)
PRE-DELIVERY INSPECTION (PDI) | 1

2019

Q7
Audi Technician Report
Settings

Driving Performance (continued)

 Verify operation of MMI® touch screens, upper and lower

 Verify transmission operation, including shift paddles (if
equipped)

 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set “Music volume while parking” to medium*
 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning (if equipped)*
Media / Radio / SAT
 Verify operation of all USB ports
 Verify operation of aux. input (if equipped)
 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of all slots

 Test drive vehicle applying brakes several times*
 Check adaptive air suspension in all positions (if applicable)
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
 Verify operation of all-wheel steering with vehicle speeddependent control
Driver Assistance
 Verify cruise control and ACC with Traffic jam assist (congestion assist) (if equipped)

 Program the presets to local stations

 Verify Audi side assist functionality Pre sense rear (if
equipped)

 Verify HD Radio is turned “off”*

 Verify Audi active lane assist functionality (if equipped)

 Verify Audi phone box sticker and registration information is
present (if equipped). See TSB 2051720

 Verify operation of night vision camera (if equipped)

Audi connect® (USA ONLY)
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Enable Google Earth view for navigation (if equipped)*
On-Hoist Inspection
 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Verify operation of parking system*
 Verify operation of Traffic sign recognition (if equipped)
 Verify all vehicle Head-up display functionality (if equipped)*
 Verify operation of High-beam assistant (if equipped)
 Activate NAV and follow directions back to dealership
Post-Road Test Inspection
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed

 Check underside of vehicle for fluid leaks and loose components

 Check engine oil level*

 Install wheel locks (if equipped)

 Check all fluid levels and top off if necessary

 Install wheel bolt covers and center caps as supplied*

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Inspect wheel bolts for proper torque*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Apply 30 Day Inventory Maintenance Sticker**

Driving Performance

 Must fuel with 91 Octane or higher

 Install showroom charger to ensure battery remains
charged at all times**

 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*

Effective 1-14-2019-US
Version 1.2

PRE-DELIVERY INSPECTION (PDI) | 2

2019

Q7
Audi Technician Report

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 1-14-2019-US
Version 1.2

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 3