55
57

49
47

48

63 64

62

74
75

63
61

Aftermarket Single to Dual HCV
& Linkage Conversion Kit

59

76

79

18

78

77

SP-182

AIRTEK® for International Truck Vehicles (PEC)

KEY NO. PART NO.
DESCRIPTION
1
2

Air Spring
******Air Spring Bracket, See Replacement
Guide on Page 20
3
*¾" Flat Washer
4
*¾"-16 UNC Nylocknut
5
*½" Hardened Washer
6
*½"-13 UNC Nylocknut

HCV & Linkage Assembly
59427-013L Left Hand, If equipped, Includes Key Nos. 7a-14
59427-014L Right Hand, Includes Key Nos. 7b-14
7
*****Height Control Valve
a
59935-011L Left Hand, If equipped
b
59935-018L Right Hand, Replaces 59935-010
8
59428-004
HCV Linkage
5⁄16"-18 UNC Stud
9
59169-000
5⁄16"-18 UNC Nut
10
17491-011
5⁄16" Hardened Washer
11
22962-029
5⁄16"-18 UNC Locknut
12
59016-000
13
22962-028
¼" Hardened Washer
14
49983-000
¼"-20 UNC Locknut
60961-071
Lower Link Mount Service Kit, One Side,
Includes Key Nos. 15-17
15
59429-002
Lower Link Mount
3⁄8"-16 UNC x 3½" Hex Bolt
16
58035-006
3⁄8" Flat Washer
17
22962-015
18
Shock Absorber
65992-001L Sleeper
65992-002L Day Cab
19
*5⁄8"-11 U­NC x 4" Upper Shock Bolt
20
*5⁄8" Upper Shock Washer
21
*5⁄8"-11 U­NC Upper Shock Locknut
22
59946-001
Shock Spacer
23
*¾"-10 UNC x 8" Lower Shock Bolt
24
*¾" Lower Shock Hardened Washer
25
*¾"-10 UNC Lower Shock Hex Locknut
26
*Shock Bracket
27
*Caster Wedge
28
******Leaf Spring Assembly with Bushing
Replace 65771-000 with Kit No. 60961-134,
See Replacement Guide on Page 20
60961-109
Rear Spring Mount Service Kit (One Side)
Includes Key Nos. 29-34
29
58920-000
Spring End Plate
30
58918-000
Rear Spring Mount
31
65772-000
Rear Mount Spacer
32
30970-001
½"-20 UNF x 3½" Bolt
33
22962-014
½" Hardened Washer
34
17700-034
½"-20 UNF Nylocknut
35
65856-000
Thrust Washer
36
*¾"-10 UNC x 6" Hex Bolt
37
*¾" Flat Washer
38
*¾"-10 UNC Locknut
39
Rear Hanger
68317-001 Left Hand
68317-002 Right Hand
40
66019-000
Belly Band (For Service Only)
41
*5⁄8"-11 UNC x 2" Hex Bolt
42
*5⁄8" Hardened Washer - O.D. 1.3"
43
*5⁄8" Hardened Washer - O.D. 1.75"
44
*5⁄8"-11 UNC Hex Locknut
45
******Top Pad, See Replacement Guide on
Page 20
70952-0XX
STEERTEK Axle Assembly, Includes Key Nos.
46-52, 54-56, 58-59, 63-70, 72, Contact
Hendrickson Truck Parts for part number
46
64905-001
Axle & Kingpin Assembly

SP-182

65790-002L

VEHICLE
QTY.
2
2

KEY NO. PART NO.
DESCRIPTION

VEHICLE
QTY.

47

Left Hand Lower Steering Knuckle Assembly
Includes Key Nos. 53, 57, 71
58900-071 250 Ackermann - Long Wheel Base
1
58900-073 200 Ackermann - Short Wheel Base
48
Right Hand Lower Steering Knuckle Assembly
Includes Key Nos. 53, 57, 71
58900-072 250 Ackermann - Long Wheel Base
1
58900-074 200 Ackermann - Short Wheel Base

Upper Steering Knuckle Assembly
Includes Key Nos. 53, 57
49
60903-041 Left Hand
1
50
60904-034 Right Hand
1

Kingpin Bushing and Bearing Service Kits
60961-040
Axle Set, Includes Kit Nos. 60961-009 & -039
60961-009
Left Hand with Composite Thrust Bearing,
Includes Key Nos. 51-54, 56-58, Loctite
60961-039
Right Hand with Roller Thrust Bearing, Includes
Key Nos. 51-53, 55-58, Loctite
51
59156-000
Grease Cap Assembly
4
52
58937-000
Retaining Ring
4
53
58909-000
Kingpin Bushing
4

Thrust Bearing Service Kits
60961-043 Axle Set, Includes Kit Nos. 60961-041 & -042
60961-041
Left Hand Composite Thrust Bearing,
Includes Key Nos. 54, 56-58 and Loctite
60961-042
Right Hand Roller Thrust Bearing,
Includes Key Nos. 55-58 and Loctite
54
59828-000
Left Hand Composite Thrust Bearing,
1
55
64256-000L
Right Hand Roller Thrust Bearing
1
56
Kingpin Shim
As Req.
60259-001X 0.005" Thickness (Pack of 4)
60259-002 0.047" Thickness
57
58910-001
Kingpin Seal, Replaces 58910-000
4
5⁄8"-11 UNC Socket Head Cap Screw
4
58
60236-001
Not Shown 60937-000
Loctite (Red) Compound Tube
1
59
Tie Rod Assembly, Includes Key Nos. 60-62
1
See Selection Guide on Page 5

Tie Rod End Service Kits, See Selection
Guide on Page 5

Axle Set, Includes Left Hand & Right Hand Kits

Left Hand, Includes Key Nos. 60, 62-64

Right Hand, Includes Key Nos. 61-64

Tie Rod End, Includes Key No. 62, See
Selection Guide on Page 5
60
Left Hand
1
61
Right Hand
1
62
**7⁄8" Castle Nut
2
7⁄8" Flat Washer
63
22962-007
2
64
17800-004
Tie Rod Nut Cotter Pin
2
60961-069
Stop Bolt Service Kit, One Side,
Includes Key Nos. 65-66
65
60238-001
½"-13 UNC Square Head Bolt
2
66
60240-000
½"-13 UNC Hex Jam Nut
2
67
59952-023
Top Axle Wrap
2
68
64722-003
Bottom Axle Wrap
2
69
65757-000
Top Axle Wrap Liner
2
70
59845-000
Bottom Axle Wrap Liner
2
71
64246-000
ABS Sensor Sleeve
2
72
64578-000
1½"-12 UNF Spindle Nut
2
73
*¾"-10 UNC x 8½" Hex Bolt
8
74
*¾" Flat Washer
8
75
*¾"-10 UNC-2B Nylocknut
8
60961-116
Aftermarket Dual HCV & Linkage Conversion Kit
Includes key Nos. 76-79
76
59429-002
Lower Link Mount
1
3⁄8"-16 UNC x 3½" Hex Bolt
77
58035-006
1
3⁄8" Flat Washer
78
22962-015
1
79
59427-013L
Left Hand HCV & Linkage Assembly
1

2
2
2
2
1
1
1
1
2
2
2
2
2
4
4
2
2
2
2
2
4
2
2
2
4
2
2
2
2

2
2
2
4
4
4
4
2
4
2
1
1
1
4
4
4
4
2
1
1

19

• For all (*) see Notes on Page 13

AIRTEK® for International Truck Vehicles (PEC)
­­­AIRTEK • Prior to New Engine Configuration (♦PEC) Component Replacement Guide
Description

Current Part No.
(♦PEC)

Replacement
Part No.

Comments

Air Spring Bracket

64583-000 (LH)
64586-000 (RH)

♦♦

66775-000 (LH)
66776-000 (RH)

Requires the replacement of both air spring brackets, both top pads, lower
link mount(s) with the ♦♦NEC design and the elimination of both upper shock
bracket spacers. Contact Hendrickson Engineering for more information.

Lower Link Mount

59429-002

59429-002

Will continue to be serviced with the ♦PEC design in the aftermarket.

Spacer for Upper
Shock Bracket

59946-001

See Comments

No longer required when the top pad is replaced with the ♦♦NEC design.

Leaf Spring
Assembly

65771-000

66420-000

Requires the replacement of both leaf springs along with the removal of the
caster wedge (if equipped), replace with Service Kit 60961-134, see below
for contents.

Top Pad

64580-000

♦♦

68318-001 (LH)
68318-002 (RH)

♦♦
♦♦

Requires the replacement of both top pads, both air spring brackets, lower
link mount(s) with the ♦♦NEC design and removal of both upper shock
bracket spacers. Contact Hendrickson Engineering for more information.

PEC: Prior to New Engine Configuration, vehicles built prior to 9/2006
NEC: New Engine Configuration, vehicles built after 9/2006

♦

♦♦

AIRTEK ♦PEC Replacement Service Kit Contents
PART NO.

DESCRIPTION

QTY.

60961-134
66420-000

Leaf Spring Assembly Replacement Kit, Axle Set
Leaf Spring Assembly, Pre-assembled with Spring
End Plate, Thrust washers, Rear Spring Mount,
Rear Spring Mount Spacer, and Fasteners
58917-016 ¾"-10 UNC x 8½" Hex Bolt (Clamp Group)
10
22962-001 ¾" Flat Washer
8
17700-033 ¾"-10 UNC-2B Nylocknut
8
58917-008 ¾"-10 UNC x 6" Hex Bolt (Rear Hanger)
2
22962-033 ¾" Flat Washer
8
49842-000 ¾"-10 UNC-2B Nylocknut
4

This is a general parts list to provide directional information. Components may vary by model. Questions in regards to parts, contact Hendrickson Truck Parts at
1.866.755.5968 (Toll-free U.S. and Canada), 630.910.2800 (Outside U.S. and Canada) or e-mail: truckparts@hendrickson-intl.com.

www.hendrickson-intl.com

Truck Commercial Vehicle Systems
800 South Frontage Road
Woodridge, IL 60517-4904 USA

1.866.755.5968 (Toll-free U.S. and Canada)
630.910.2800 (Outside U.S. and Canada)
Fax 630.910.2899

“HENDRICKSON”, the “H” logo and other Hendrickson
marks designated with the “®” symbol are registered
trademarks of Hendrickson USA, L.L.C. in the
United States and certain other countries.
SP-182 Rev H 12-18

Information contained in this literature was accurate at the time of publication. Product changes may have been made after the copyright date that are not reflected.
© 2006 – 2018 Hendrickson USA, L.L.C. All Rights Reserved

Printed in United States of America