1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

H181 UPS13018-3BNAS1

TECHNICAL BULLETIN
21 DEC 2018

© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.

INFORMATION

SECTION:
303-01

SUBJECT/CONCERN:
Update Prior to Sale: Center Main Crankshaft Pulley Bolt

AFFECTED VEHICLE RANGE:
MODEL:

MODEL YEAR:

VIN:

APPLICABILITY:

F-PACE (X761)

2019

394095-601147

V6 S/C 3.0L Petrol /V8 S/C 5.0L Petrol

F-TYPE (X152)

2019-2020

K62212-K62725

V6 S/C 3.0L Petrol /V8 S/C 5.0L Petrol

XJ Range (X351)

2019

W19686-W20172

V6 S/C 3.0L Petrol

https://topix.landrover.jlrext.com/topix/content/document/view?id=948967

1/25

1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

MARKETS:
NORTH AMERICA

CONDITION SUMMARY:

SITUATION:
An issue has been identified on certain Jaguar vehicles within the listed Affected Vehicle Range where
the center main crankshaft pulley/damper bolt may have been manufactured away from specification.

ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from
releasing the vehicles for new vehicle sale pending completion of the Diagnostic/Workshop Procedure
detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery
Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.
This program does not apply to any vehicle already registered and in use, either with the retailer or
customer. Any vehicle already in use may continue to be driven and any repair instructions deemed
necessary will be communicated through a separate bulletin.

PARTS:

NOTE:
Partial quantities of all campaign requirements for AJ811490 were shipped to all USA and Canada
Retailers on December 20, 2018. Parts orders for the remaining balance of all campaign parts have
been placed for all USA and Canada Retailers and will be fulfilled over the next several days.
DESCRIPTION

Bolt(s) - Center main crankshaft
pulley

PART NUMBER/SUNDRY
CODE
AJ811490

https://topix.landrover.jlrext.com/topix/content/document/view?id=948967

QUANTITY/VALUE

1

EXPECTED PERCENTAGE
DEMAND
100

2/25

1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

SPECIAL TOOLS:
Refer to TOPIx Workshop Manual/Workshop Procedure for any required special tools.

WARRANTY:

NOTE:
Use the Jaguar Land Rover claims submission system to make sure that a vehicle is affected by this
program prior to undertaking any rework action.
At the time of confirming a booking for vehicle repair, make sure that all open Recall and Service Actions
are identified to make sure the correct parts are available and adequate workshop time is allocated for
repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will
result in payment of the stated time. The SRO and parts information is included for information only. The
Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is
brought back into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times/prices are subject to change; those
quoted here must be taken as guidance only. Use TOPIx to obtain the latest repair time.
This program is valid for a limited time only. Warranty claims with a repair date prior to the December 20,
2019, closure date must be submitted or payment within 30 calendar days of completion of the repair.
PROGRAM
CODE

OPTION
CODE

DESCRIPTION

SRO

H181

A

F-PACE - V6 3.0L
S/C Petrol
Crankshaft pulley
bolt(s) - Renew

12.21.89.01

1.5

AJ811490

1

H181

B

F-PACE - V6 3.0L
S/C Petrol
Crankshaft pulley
bolt(s) - Renew
Drive In/drive out

12.21.89.01
10.10.10

1.5
0.2

AJ811490
-

1
-

https://topix.landrover.jlrext.com/topix/content/document/view?id=948967

TIME
(HOURS)

PART
NUMBER/SUNDRY
CODE

QUANTITY/VALUE

3/25

1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

PROGRAM
CODE

OPTION
CODE

DESCRIPTION

SRO

TIME
(HOURS)

PART
NUMBER/SUNDRY
CODE

QUANTITY/VALUE

H181

C

F-PACE - V8 5.0L
S/C Petrol
Crankshaft pulley
bolt(s) - Renew

12.21.89.01

1.4

AJ811490

1

H181

D

F-PACE - V8 5.0L
S/C Petrol
Crankshaft pulley
bolt(s) - Renew
Drive In/drive out

12.21.89.01
10.10.10

1.4
0.2

AJ811490
-

1
-

H181

E

XJ - V6 3.0L S/C
Petrol
Crankshaft pulley
bolt(s) - Renew

12.21.89.01

2.1

AJ811490

1

H181

F

XJ - V6 3.0L S/C
Petrol
Crankshaft pulley
bolt(s) - Renew
Drive In/drive out

12.21.89.01
10.10.10

2.1
0.2

AJ811490
-

1
-

H181

G

F-TYPE
Crankshaft pulley
bolt(s) - Renew

12.21.89.01

1.5

AJ811490

1

H181

H

F-TYPE
Crankshaft pulley
bolt(s) - Renew
Drive In/drive out

12.21.89.01
10.10.10

1.5
0.2

AJ811490
-

1
-

Normal Warranty policies and procedures apply.

WORKSHOP PROCEDURE 'A' - F-PACE, XJ ONLY:

CAUTION:
The center main crankshaft pulley/damper bolt is left-hand thread.

NOTES:
https://topix.landrover.jlrext.com/topix/content/document/view?id=948967

4/25

1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

Some variation in the illustrations may occur, but the essential information is always correct.
Some components shown removed for clarity.
1

NOTE:
F-PACE only.
Remove the radiator (see TOPIx Workshop Manual section 303-03: Engine Cooling - Radiator).
1 Once all tasks are finished, go to Step 3.

2

NOTE:
XJ only.
Remove the cooling fan and shroud (see TOPIx Workshop Manual section 303-03: Engine
Cooling - Cooling Fan and Shroud).
1 Once all tasks are finished, go to Step 3.

3

NOTE:
Do not discard the 2 outer crankshaft pulley bolt(s).


https://topix.landrover.jlrext.com/topix/content/document/view?id=948967

5/25

1/7/2019

H181 UPS13018-3bNAS1 - Update Prior to Sale: Center Main Crankshaft Pulley Bolt | TOPIx

Remove and set to the side only the 2 highlighted outer crankshaft pulley bolt(s).
4



Install the special tools 303-1437 and 303-1438 as shown.
5



Using the bolt(s) for special tool 303-1437, install the 2 bolt(s) to the crankshaft pulley.
Torque: 25 Nm
6

CAUTION:
Use care when positioning the vehicle stand.

https://topix.landrover.jlrext.com/topix/content/document/view?id=948967