NHTSA ID Number: 10153348
Manufacturer Communication Number: SCI19-01
TSB/Document Date: 2019-02-19
Summary
This procedure explains how to program a MCM especially for the control of the electric fan drive, as required for conversion kit of instruction sheets IS-19900 & IS-19910.
SERVICE
CENTER
INFORMATION
i
DATE :
SUBJECT :
SCI19-01
January 2019
SECTION : 00 GENERAL
MCM MODULE P/N 23499009 BENCH PROGRAMMING
PROCEDURE FOR THE ELECTRIC FAN DRIVE
CONVERSION KIT
First Release
01-12-19
DESCRIPTION
The intent of this procedure is to guide you through the steps required to program a MCM especially for
the control of the electric fan drive as required for conversion kit of instruction sheets IS-19900 &
IS-19910.
BEFORE PROGRAMMING
AFTER PROGRAMMING
MCM (non-programmed)
part #23499009
MCM programmed
part #23499009_EFD
MATERIAL NEEDED
Part No.
Description
Qty
23499009
MCM (non-programmed)
1
7770985
DECAL
1
SPECIAL TOOLS AND OTHER EQUIPMENT NEEDED
1.
2.
3.
4.
5.
6.
EL
A laptop with the following software installed: MAIDCOM.
A network access
Interface harness (make this harness as per the diagram found in the instruction)
Special Prevost
cable #066009
24V-3A Power supply
Electric fan control program: body software FB0610011801
BUILD THE INTERFACE HARNESS
1. Build the interface harness as per the following diagram.
allows
EL
SCI19-01
Page 3 / 14
24V-3A POWER SUPPLY HARNESS ADAPTATION
2. The power supply connector is of positive polarity. Center is positive.
3. Cut the power supply output harness standard connector. Fit a connector #561690 with 2x socket
terminal #561578.
•
Negative wire to terminal pin A
•
Positive wire to terminal pin B.
INSTALLING MAIDCOM
4. Install Maidcom on your computer. Get Maidcom on Volvo network using the link below:
https://secure.volvo.com/VBCRemote/files_Applications/MAIDCOM%20Plugin%20for%20TechTool%20v
ersion%202.04%20and%20up/Setup.Maidcom2_7_5591_Standalone.zip
5. You will end up here. Type your username and current password.
6. This dialog box will show. Select “Open”.
EL
SCI19-01
Page 4 / 14
7. A window similar to the one below will show. Double-click on the file to run the Setup Wizard and
perform the installation steps.
EL
SCI19-01
Page 5 / 14
8. Maidcom now installed on your computer.
9. Make a new icon in your taskbar so you can start Maidcom from the taskbar. To do so, in the Start
Menu, right-click on M2 Maidcom2 and then select Pin to Taskbar.
EL
SCI19-01
Page 6 / 14
NEW
LINK ON YOUR COMPUTER
Important note for computers equipped with Windows 10. Make sure that Internet
Explorer is installed on your computer and that you use it to create the link and to
connect with the MCM module.
Edge fails to connect with the MCM module. Don’t use Edge for this procedure.
10. You need to create one shortcut (Internet Explorer link) on your desktop as seen on the image below.
11. Create the link with the following addresses:
Name: Volvo Bus Local Host
http://localhost:49555/
GET BODY SOFTWARE AND SAVE ON YOUR COMPUTER
12. Get the MCM program for US10 to GHG17 (body software FB06100118F01) on the Service Tips
portal using the link below and save it on your computer.
http://teamplace.volvo.com/sites/vbc-scr-dtr-service/Service tips/Electric Fan drive service kit/Body
Software
EL
SCI19-01
Page 7 / 14
13. Click on FB06100118F01 and then save it on your computer at an appropriate location. You can
save file to your Desktop, which can give you quick access to it.
CONNECTIONS
14. Connect your interface harness to the non-programmed MCM.
15. Connect harness #066009 to the COM serial port of your computer.
#066009
16. Connect the other end of harness #066009 to the DB9 connector on the interface harness.
EL
SCI19-01
Page 8 / 14
17. Connect the 24V power supply to the appropriate connector on the interface harness.
START MAIDCOM
18. Click the Maidcom icon to start it.
Maicom will try to connect with the MCM module.
There is a good chance that the first connection trial fails.
If this is the case, in the taskbar, right-click the Maidcom icon and then select Auto-Detect.
EL
SCI19-01
Page 9 / 14
EL
SCI19-01
Page 10 / 14
CONNECTING WITH THE MCM WEB PAGE
19. Connect with the MCM web page using the Volvo Bus Local Host link previously made.
20.
Make sure to use Internet Explorer
.
Use the following user name & password:
User name:
USER1
Password:
fqYos
20. Once connected, select Download Software Package.
EL
SCI19-01
Page 11 / 14
21. Click on Browse and search for the Body Software saved on your computer (see 1 on image
below).
22. Select the Body Software FB0610011801 (see 2 on image below).
23. Click on Download (see 3 on image below).
24. Click on Start System Software and then….wait
EL
.
SCI19-01
Page 12 / 14
25. The following window is normal, ….wait
26. The following window is normal ….wait until the window closes.
CONFIRM THAT THE MCM WAS PROGRAMMED SUCCESSFULLY
27. Confirm that the MCM was programed successfully. Select Vehicle Information.
EL
SCI19-01
Page 13 / 14
28. Select Body ECU Info.
Success
GOOD. FIELDS ARE POPULATED
Fail
EL
SCI19-01
Page 14 / 14
ERROR. ALL FIELD VALUES ARE “0”
In case of failure, you can try to program the MCM once again but first, shut down your computer and
restart. Doing so gives good results.
29. Exit Maidcom. To do so, right-click on the icon and then select Disconnect.
DECAL
30. Identify the now programed MCM. Programed MCM for the Electric Fan Drive conversion kit is
part number 23499009_EFD. Affix decal #7770985 on the programed MCM. To avoid any
confusion, hide the MCM previous part number 23499009 with the decal.
EL
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SCI19-01
Replacement Service Bulletin Number:
MFR Communication Date: 2019-01-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- 【Looking for More Professional Vehicle Scan Tool?】iCarsoft E660 2026 Upgrade Version OBD2 scan tool can do it all-reads and clears trouble codes on Engine system, ABS system, Transmission system and Airbag system, And with 6 reset function. It covers more than 59 vehicle makes from 1996-2023 models ( included most USA/ Asia / EU vehicle brand) with full OBDII. (As every car model has its-owned specific car system and ECUs, not all car models have full car ECUs which may prevent the scanner from performing all listed system diagnostics or reset services. Therefore, please email to us with car VIN and services required to do scanner's services for a compatibility check before purchasing.)
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E660 2026 Upgrade Version diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan Engine system. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E660 2026 Upgrade Version adopts unique diagnostic software, works well for most Porsche, Benz, BMW, US Ford, Land Rover, Jaguar, Audi, VW, Volvo, Honda, Nissan, Infiniti, Toyota, Lexus, Scion, Isuzu, Hyundai, Kia, Daewoo, Mazda, Sprinter, Mini, Seat, Skoda, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat, GM, Chrysler, Citroen, Peugeot, Opel, Smart,Suzuki, Vauxhall, Alfa-Romeo, Lancia and etc.
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is a diagnostic tool that offers professional maintenance services, including Oil Reset, EPB, BMS, ETC, SAS, TPMS Reset. It can help you easily reset oil change indicators, recalibrate steering angle sensors, relearn replaced electric parking brake and so on. For optimal vehicle performance and maintenance convenience. (Tips: Please update the softwareafter receiving the product to obtain new service functions)
- 【118+ Real Time Record & Live Graph View】iCarsoft E660 2026 Upgrade Version can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. 15 languages: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage.
- 【All-in-One Diagnostic Tool for Porsche + 2 Extra Vehicle Brands】New POR V4.0 is a professional car scanner specifically engineered with dedicated software pre-installed for Porsche. You can also download 2 additional software packages FOR FREE from 26 supported brands (e.g., for Benz, for BMW, for Audi, for Land Rover).Upgraded to adopt quad-core 1.3GHz processor and HD touchscreen and professional diagnsotic OS for faster& smooth diagnsotic.LIFETIME FREE UPDATES, NO SUBSCRIPTION COST! PLEASE TELL US YOUR CAR INFORMATION TO OBTAIN A LIST OF ALL COMPATIBLE SERVICES FOR YOUR CAR FIRST (FOR EXAMPLE: BATTERY REGISTRATION FUNCTION IS NOT COMPATIBLE WITH PORSCHE 997.2)
- 【29 MAINTENANCE SERVICES FOR PORSCHE SERIES CARS】 It can perform the 29 reset service for Porsche series cars-Oil Reset; SAS; EPB; BMS; ETC; DP ; ABS Bleeding; Injector Coding; TPMS; Air Suspension; Air Conditioner; Head Lamp; Body Stablity Control; Engine Control; Transmission; AirBag; Seat; DWR; MIS; EG; ODO; Clutch; High Voltage Battery; Cruise Control; Radar/Camera; Vehicle Setup,etc. Up to 49 vehicle-maintenance-services for the extra 2 vehicle brands you installed (Tip: Not all services will be worked on every car mode. Some vehicle models may be lack of certain ECU-control modules to make some services may not work).
- UPGRADE SERVICES: Breaks down 29 services to 234 sub-service for car owners/machinist to perform maintenance based on corresponding sub-modules! The detailed sub-service for sub-modules assist to perform precise vehicle maintenance.Improving the accuracy of car maintenance and reducing potential failure risks caused by whole-module maintenance to main modules.such as Oil Reset is refined into Reset maintenance interval/Reset service interval/Service Reset; Engine Control Reset is refined into Delete adaptation data/Short tests/System tests/Swirl-flap actuator/Bleeding high temperature coolant circuit and more.（sub-services vary based on vehicle model/year）
- 【EXTRA VEHICLE MAINTENANC SERVICES FOR SPECIFIC SYSTEMS】Have no ability to perferm calibration to special/specific systems/modules? This OBD2 scanner solve your troubles- for common systems/modules & for specific sytems/modules, assist you to perform diagnsing/calibration/reset/relearn services for non-common modules to finish your car maintenance/ diagnostic (eg: Central Computer system/module :Function activation/Multimedia interface test/AM Field Strength/Current FM Field Strength/FM Field Strength/MOST system reserve/Self-test/Deactivate Production Mode/Reset to factory settings/MOST System Test). (Tip: The services vary based on the vehicle brands)
- 【 MORE PROFESSIONAL BI-DIRECTIONAL ACTUATION TESET 】Exclusive POR V4.0 comes with powerful bidirectional testing capability,do actuaction test for deeper unit-checking after replacement or overhaul (1333 test items for Porsche, like:Fuel high-pressure fuel injector 1-4, Empty tank, Radiator fan, OTA-FC Connectivity, backrest, Backup battery, and more; 2136 test items for Audi; 1670 test items for Benz; 1599 test items for Volvo; 1360 test items for VW; 2705 test items for GM etc.). Help to check your car units work well or not after vehicle maintenance or daily car-body check, keep drives always in safety.(Warm tip:The quantity of test item is based on the units your car has)
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.