NHTSA ID Number: 10153123
Manufacturer Communication Number: A211830 2044640-
TSB/Document Date: 2019-02-19
Summary
This bulletin contains repair instructions for when the engine cannot be started or it is difficult, there is unusual noises when accelerating and/or there is reduced engine performance.
Technical Service Bulletin
21 Engine difficult to start, turbocharger damaged V8 4.0TFSI
21 18 30 2044640/5 November 28, 2018. Supersedes Technical Service Bulletin Group 21 number 18-29 dated
May 22, 2018 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A8, S7, S8,
S8+, RS7,
and RS7+
2016
All
4.0L
A8
2017
000001 - 019190
4.0L
S8
2017
000001 - 901368
4.0L
S7
2017
000001 - 115286
4.0L
RS7, RS7+
2017
000001 - 904264
4.0L
Condition
REVISION HISTORY
Revision
Date
Purpose
5
-
Revised Technical Background (Added Note)
Revised Service (Added QR code and updated Note)
Revised Warranty (Updated Labor Operations)
4
05/22/2018
Revised header data (Added model years)
3
05/14/2018
Revised header data (Added VIN breaks for 2017 models)
Revised Production Solution (Added information)
Revised Service (Added Note and updated Step 7)
Revised Required Parts and Tools (Added part numbers)
Customer statement:
Engine cannot be started or only with difficulty.
Engine makes unusual noises when accelerating.
Engine has reduced performance.
Page 1 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
Workshop findings:
Damage on turbocharger impeller fins, increased free play on impeller shaft of turbocharger, or broken impeller
shaft.
Technical Background
Damage to the turbocharger is rarely directly the result of turbocharger failure. Therefore, it is important to
perform further checks to find the root cause, to avoid repeat repairs.
Known causes for turbocharger damage:
Performance increases by tuned ECM
Non-compliance with service intervals
Incorrectly fitted oil filter element
Leaks in intake tract allowing outside unfiltered air and debris into the turbocharger
Poor oil supply of turbocharger
Note:
If the vehicle has any DTCs related to the turbocharger boost/regulation the complete GFF Test plan must be
completed and repairs performed before determining if further repairs are necessary.
Production Solution
Optimized oil strainer 079115175G for oil supply lines to turbochargers in the cover in the inner valley of
engine. The oil strainer and check valve 079103175C must always be replaced to ensure proper oil flow to
the turbochargers.
Page 2 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
Service
Watch the June Tech Tip before proceeding with the below repair
at: https://audiacademy.kzoplatform.com/player/medium/1186073779801953796
(Figure 1).
Figure 1. QR Code for supporting
video.
1. Perform the Guided Functions with the diagnosis tester: "01 check warranty information." Then check
for an entry with the vehicle data in ELSA under warranty code.
All information must be documented with pictures and the attached Checklist completely filled out
and stored with the Repair Order.
2. Check the hardware
version of the engine
control unit. An X
version indicates that
the engine control
module was replaced/or
is modified (Figure 2).
Figure 2. Correct hardware version number.
3. Check the intake tract for leaks. Review the repair history for possible previous repairs on the intake
tract.
4. Measure the oil pressure at idle and 2000 rpm according to ElsaPro.
5. Visually assess the condition of the damaged turbocharger from both sides. No oil marks (charge air
and exhaust side) could be another indication for a poor oil supply to the turbocharger.
6. Check the oil filter for correct installation and correct filter part number 079115561J. If the oil filter is not
centrally fitted, the engine oil may not be filtered, entering the oil supply of the turbocharger due to the
crooked position of the oil filter element.
Page 3 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
Check the installation of the oil filter bypass valve according to service measure 17F2.
Check the oil supply line for through flow and oil deposits.
Check the oil drain hoses for through flow and oil deposits.
Note:
This TSB is not replacing any Repair Manual instructions, this TSB is meant to supplement the Repair Manual.
See ElsaPro, Engine >> 8-Cylinder Direct Injection 4.0L 4V TFSI Engine >> 21 Turbocharger >> Turbocharger,
Removing and Installing.
7. Replace both of the turbochargers as well as the oil strainer and check valve in the inner valley of engine
according to ElsaPro and observe all instructions.
8. Change the engine oil including oil filter.
9. Follow the installation instructions in ElsaPro for the turbochargers exactly including:
Filling the turbocharger at the supply line connections with engine oil.
To ensure the turbocharger is supplied with enough oil, let the engine run at idle for approximately one
minute after starting, do not increase rpm.
Note:
Failure to follow the TSB and ElsaPro instructions may lead to premature turbocharger failure which may
be reviewed by Warranty.
Warranty may review the claim and both turbos. Documents and pictures may be requested to be sent to
the Warranty Parts Return Center.
Warranty
Claim Type:
110 up to 48 Months/50,000 Miles.
G10 for CPO Covered Vehicles – Verify Owner.
If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2130
Damage Code:
0010
Labor Operations:
Turbocharger replace
2130 5671
See SRT
Oil pressure check
1703 0199
80 TU
Page 4 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
Diagnostic Time:
Claim Comment:
Check intake and exhaust system for
debris, additional time is included in
Turbocharger remove + reinstall
2130 0199
20 TU
Remove + reinstall oil strain and check
valve
1726 2099
70 TU
Check that oil bypass valve is fitted
correctly
1701 0199
10 TU
Engine oil and filter change
1701 1799
40 TU
Turbochargers remove + reinstall
2130 2071
See SRT
Air intake distributor remove + reinstall
without night camera and radar sensor
2446 1921
See SRT
Air intake distributor remove + reinstall
without night camera and radar sensor
(RS7 only)
2446 1923
See SRT
GFF
0150 0000
30 TU
Road test prior to service procedure
0121 0002
10 TU
Road test after service procedure
0121 0004
10 TU
As per TSB # 2044640/5
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi
Warranty
Required Parts and Tools
Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please
check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
Part Number
Part Description
Quantity
079103175C
Check valve
01
079115175G
Oil strainer
01
Order by VIN
Left waste gate vacuum unit with actuator rod
01
Order by VIN
Right waste gate vacuum unit with actuator rod
01
Page 5 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
079103161Q
Cover Gasket
01
N 90303801
Lower oil supply o-rings 9x1.5 black
02
N 91056801
Upper oil supply o-rings 12x2 black
02
WHT006901A
Oil return o-rings 14.5x2
02
N 90465003
Water tube o-rings 23x2.6
03
N 90409501
Clamp breather hoses
04
079129717K
Intercooler housing gasket right side
01
079129717J
Intercooler housing gasket left side
01
079145818
Throttle body gasket
01
079103583
Breather seals
03
N 90686902
Spring clips 23x12 breather hoses
04
WHT006335A
Turbo coolant pipe o-rings lines (blue 2.0mm)
04
Note:
Installed seals are based on which pipes are installed
(see TSB 2036167).
WHT006537
Turbo coolant pipe o-rings lines (black 2.8mm)
04
Note:
Installed seals are based on which pipes are installed
(see TSB 2036167).
WHT001011A
Coolant supply pipe lower o-rings yellow 12.2x1.65
02
Order by VIN
Left turbocharger
01
Order by VIN
Right turbocharger
01
WHT005529
Inlet pipe o-rings
02
079253039M
Exhaust manifold gaskets
02
N 90894601
Manifold nuts M8
16
G 052112A3
Hot bolt paste 170G
01
Page 6 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
4G0253115D
Turbocharger outlet gaskets
02
N 91153902
Turbocharger studs
10
N 91130802
Manifold nuts
10
N 0138495
Drain plug gasket
01
079198405D
Oil filter kit
01
G 013A8J1G
Coolant additive
01
Outside material
Distilled water (obtained locally)
Shop supply
Tool Number
Tool Description
3371
Gauge – Gap adjustment tool
V.A.G 1342
V.A.G 1274/8
Adapter
V.A.G 1274/10
Adapter
VAS 6096
Cooling system charge unit
T10007 A
Refractometer
Approved battery charger
Additional Information
More information can be found at the following resources:
ElsaPro, Engine >> 8-Cylinder Direct Injection 4.0L 4V TFSI Engine >> 21 Turbocharger >> Turbocharger,
Removing and Installing.
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
TSB 2028842, 01 Automatic detection of unauthorized chip tuning (TD1 warranty key).
TSB 2036167, 19 Coolant pipe seepage on turbocharger.
All parts and service references provided in this TSB (2044640) are subject to change and/or removal.
©2018 Audi
of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
Page 7 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 8 of 8
© 2018 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A211830 2044640-
Replacement Service Bulletin Number:
MFR Communication Date: 2018-11-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS
Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS
Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first - Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS
/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS
/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities. - 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS
Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming. - 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




