Press "Next" to proceed.

ay

© 2016 Toyota Motor Sales, USA
CPTOYOTA _ T-SB-0013-16 February 26, 2016 Page 22 of 33

Techstream Smart Key Programming

Procedure C — Smart Key Erase and Registration (Continued)

14. Turn the engine/power switch OFF. igure)
Se ene ES) ame
NOTE om
On the next screen you will be asked SmartKey Erase andipegion align k

to turn the IG ON. The power switch
indicator light will be blinking. You
MUST touch the smart key to be
registered to the power switch within
10 seconds.

Tum the engine/power switch OFF.

Perform the steps of next screen to register Smart
| Keys. |
| Note:

After registering two or more Smart Keys, keep the
IG ON for 60 seconds to end Registration Mode.

Press “Next” to proceed f

15. Follow the 3 steps on the screen. Figure 35.
NOTE See mie ae
After finishing step 3, wait at least 60
seconds before pressing next. If you

do not wait at least 60 seconds, you a sichile ON (Eng
j . The engine/power switch is ngine

will have to start over. OF FiReady OFF),

2. Touch the Smart Key to be ragistered with center

of the engine/power switch while the indicator light

is blinking (only 10 seconds).

3. Remove the Smart Key after the indicator light

changes from blinking to lit.

Smart Key Erase and Registration i
|

Press "Next" to proceed

© 2016 Toyota Motor Sales, USA

CP) TOYOTA T-SB-0013-16 February 26, 2016 Page 23 of 33
Techstream Smart Key Programming
Procedure C — Smart Key Erase and Registration (Continued)
16. This screen will show you how many keys Figure 36.
you have registered. Press No unless you ‘Smart Key Function (S$U-08-325)

have a 3” or 4" key to register.

NOTE

A maximum of 6 keys can be registered
at one time.

17. Turn the engine/power switch OFF and
press Next

f Help

Smart Key Erase and Registration

Nurnber of the registered Smart Keys :

2

Do you want to continue te register?

TO
Back t Yes q No
eed __

Figure 37.

Co
Smart Key Function (SSU-08-324)
ee

: Help

Smart Key Erase and Registration

Tum the engine/power switch OFF.

Press "Next" to proceed

« Back | Next >

© 2016 Toyota Motor Sales, USA
CPTOYOTA _ T-SB-0013-16 February 26, 2016 Page 24 of 33

Techstream Smart Key Programming

Procedure C — Smart Key Erase and Registration (Continued)

18. Perform the steps on this screen with all of Figure 38.
the registered keys. Smut Key Function (SSU-08-322)

Help

Smart Key Erase and Reglstration

Perform the following steps with all the Smart Keys
you registered

1. Depress and hold the brake pedal (or clutch
pedal for M/T vehicle).

2, Press engine/power switch to start engine
{Ready ON) while touching the Smart Kay to canter
af the engine/power switch.

3. Turn IG OFF.

Press "Next" ta proceed

= Back | Next > | Exit |

19. Perform the steps on this screen with one of — Figure 39.
the registered keys. Press Exit.

‘Smart Key Function (S8U-03-323)
ne enim ee ese Re ees

Help

This procedure is now complete. Smart Key Erase and Registration 1

Perform the following steps with one of the Smart
| Keys you registered.
1, Place the Smart Key onto the passenger seat
| 2. Depress and hold the brake pedal (or clutch
pedal for M/T vehicle).
3. Press engine/power switch to start engine
| (Ready ON}.
4. Turn the engine/power switch OFF and ON
(Engine OF F/Ready OFF).

Exit

© 2016 Toyota Motor Sales, USA
CP)TOYOTA

T-SB-0013-16

Techstream Smart Key Programming

February 26, 2016

Page 25 of 33

Procedure D — Register Additional Smart Key

1. Select Smart Key Function.
Figure 40.

System Select | Sored Dale Smart Mey Live |

UtHity Selection Menu
Select deased Uthty and phen preva Hat button

Configuraton
On-Demand Self-Test
Customize

MerTeno re*a}

Ep
CEs)

|

seats)

sintroduttan>
They incton cepleyt the Senet Pey kancten

2. Select Register Additional Smart Key and press Next.

Figure 41.
‘Smart Key Furchon (SUDO)
eee

Select a function according to the repair manual,

| Press "Next" to proceed.

| © Smart Parameter Reset

° Smart Key Erase and Registration

Register Additional Smart Key)

Next> Exit |

Help |

|

© 2016 Toyota Motor Sales, USA

CPTOYOTA _ T-SB-0013-16 February 26, 2016 Page 26 of 33

Techstream Smart Key Programming

Procedure D ~ Register Additional Smart Key (Continued)

3. Turn the engine/power switch OFF and ON. Figure 42.
Press Next. Smart Key Function (SSU-08 -215)

Help

Register Additional Smart Key

This function is used to register additional Smart
Keys.

Perform a fallawing operation before pressing Next
- Turn the engine/power switch OFF and ON
(Engine Off/Ready OFF).

Press "Next" ta proceed

Next > Exit |

4. Techstream will generate a Seed Number. _—“Figure 43.

Click Get Pass-Code.

Sman Key Function (SU-08- ‘Ji6)

= _ = bie

a Hae

Smart Key Erase and Registration

Input Sead Number on TIS to retrieve a Pass-Code,
| then input a Pass-Code and then prass Next.

li
!
|
| Seed Number:

| Boe eotacs eat ee nae
Bbed6eI0b feb 3494 1aaSf7ed7eSfb2 I8b2 32853 Get
od 3989$.3622159902a70a82707 e08962b1F297
s92bd2bde7 7enea95eecefSe4 FecBbbdd4 Fale Pass-Code
| a

|
| Pass-Code Number:

Back | Exit |

© 2016 Toyota Motor Sales, USA
> TOYOTA T-SB-0013-16 February 26, 2016 Page 27 of 33

Techstream Smart Key Programming

Procedure D — Register Additional Smart Key (Continued)

5. Click Send to connect to TIS. Figure 44.
Sma Function
NOTE ee ne
Please refer to T-SB-0043-14 f340aa7 08099638a13280d4a9bOG0Fa5ae60Fa6
“Immobilizer and Smart Key Reset” bed398953622159902a70a82707 0896261297
for the security authorization process. eee eee

@ Smart Key Erase and Registration

Press "Send" to send the Seed Number
to the Smart Code Reset webpage.
Press "Copy" to copy the Seed Number
to the Clipboard.

Send Copy