NHTSA ID Number: 10133426
Manufacturer Communication Number: PDI 2018 Audi
Te
TSB/Document Date: 2018-04-16
Summary
All models: Vehicle Preparation section: ADDED "Using Guided Functions" to "Set adaption channel to enable CD Ripping (if equipped)" A8 and Q3: Audi connection: REMOVED: "Turn on the wireless network (if equipped)"
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Effective 11-1-2017-US
Version 1.6
Model Year 2018 | Audi Pre-Delivery Reference Document | 21
Q7
Technician Reference Document
Vehicle Preparation
Trunk Inspection
• Deactivate vehicle transport mode
• Verify power tailgate is operational and set default opening
height (if equipped)
Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating)
• Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)
Set adaptation channel (via Special functions > Service work
> 5F-Activating/deactivating storage of music). Also referred
to as CD Ripping. Perform 3 button reset of the MMI to
complete the activation. Refer to the owner’s manual for
model-specific button sequence
• Set service reminder
via Special functions –> PDI Service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
• Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
• Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors
and trunk manually and remotely lock/unlock with all keys,
including all door handle sensors with Advanced Key (if
equipped)
• Check all doors for proper power closing (if equipped)
For vehicles equipped with the power door closing feature,
check all doors for proper closing
• Prepare the base bars for customer delivery (install bars
only upon customer request)
Install the rubber strips to the top of the base carrier bars
(do not install the carrier bars on the vehicle unless customer
has requested). Repackage the bars into the box if they are
not being installed on the vehicle. Retrieve the paper with
the torque wrench key code from the base carrier bar box.
Insert the paper with the key code into the owner’s literature
wallet. Record torque wrench key code in the VDF to ensure
it’s documented in the event the paper with the code is
misplaced
Lighting and Windshield
• Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Effective 11-1-2017-US
Version 1.6
Adjust the trunk lid opening height to 75 inches (190 cm)
from the ground to the close button in the rear lid. Press and
hold the close button in the rear lid for at least four seconds
to program the opening height. Verify operation of handsfree release (if equipped)
• Install wheel bolt cover removal tool from PDI kit into
trunk lid toolkit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit to the right of the
spare tire
• Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
• Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
• Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating (if equipped) and child safety features
• Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
• Verify operation heated/ventilated and massaging seats (if
equipped)
Check both front and rear. Massaging feature is in the front
seats only (if equipped)
• Verify operation of manual folding 2nd row and power
folding 3rd row seats
Controls for the power folding 3rd row are located in the
trunk
• Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents
• Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
• Check panoramic sunroof and sunshade operation
Verify open/close/vent/deflector at edge and sunshade
operation
Model Year 2018 | Audi Pre-Delivery Reference Document | 22
Q7
Technician Reference Document
Settings
Audi connect® (USA ONLY) (if equipped) continued)
• Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
• Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Change time zone appropriate to the dealer location
• Verify and set language and measurement units
This can be changed in the Setup/Settings menu
• Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
Check Wi-Fi® hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX”, where XXXXX = the last five digits of VIN that are automatically preset in the system
• Enable Google EarthTM (if equipped)
Enable Google EarthTM in the navigation settings and verify
the white Google Logo appears next to the 2G or 3G symbol
• Set “Entertain. Fad.” in Parking aid to an audible level
Via “ Menu > Vehicle > Left Option > Drive Assistance > Parking Aid”
• Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
• Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
• Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual >Select Off
On-Hoist Inspection
• Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
• Inspect wheel bolts for proper torque
Use torque wrench to verify
• Set and store tire pressures for either sold vehicle OR
stock inventory vehicle (See separate “2018 Normal Load
Condition Tire Pressure Table” posted on ServiceNet)
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Media / Radio / SAT
Driving Performance
• Verify HD Radio is turned “off”
• Verify engine Start-Stop System functionality
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
• Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
• Verify Audi connect® Information Packet is present
Verify Audi connect® Information Packet is present including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile Terms & Conditions (T&C)(if applicable)
• Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
• Turn on the Wi-Fi® Hotspot (if equipped)
Verify the velum sticker is on the start/stop button. Remove
the start/stop information card from the car kit and place it
in the glove box with the owner’s manuals. Additional supply
can be ordered via the Brand Store on AccessAudi
• Verify engine performance and acceleration
Listen for abnormal noise/vibrations
• Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/ vibration/pulsation
• Calibrate rear view mirror
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
• Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
Effective 11-1-2017-US
Version 1.6
Model Year 2018 | Audi Pre-Delivery Reference Document | 23
Q7
Technician Reference Document
Driver Assistance (continued)
• Verify all vehicle Head-up display functionality (if
equipped)
Verify the image can be adjusted properly in the viewing
area of the windshield. Verify NAV directions, speed, cruise
control, and lane assist are all visible in Head-Up Display (as
equipped)
Post-Road Test Inspection
• Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> PDI Service. Select option 2, the battery
test for new batteries as part of the pre–delivery inspection
and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server
by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided Function. The diagnosis log will not be uploaded to GFF
paperless)
• Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Effective 11-1-2017-US
Version 1.6
Model Year 2018 | Audi Pre-Delivery Reference Document | 24
R8 Coupe/R8 Spyder
Technician Reference Document
Vehicle Preparation
Interior (continued)
• Deactivate vehicle transport mode
• Inspect mirrors for proper operation
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
• Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)
Using ODIS, right click the 5F-Information control unit 1, and
select Guided Functions > 5f-Adaptations > Storage of music
activating/deactivating (option 2) and when prompted for
the Optical drive, choose option 1 for “On”
• Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
• Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
• Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Lighting and Windshield
• Test front washers (and headlight washers if equipped)
Headlights must be on to test functionality of the headlight
washers
Trunk Inspection
• Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
• Check battery clamps for proper torque
Refer to Elsa Pro for specification
Interior
• Check operation of window, lock, and seat controls
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
Effective 11-1-2017-US
Version 1.6
Inspect folding, adjustments, right side tilt in reverse, heating
• Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
• Verify proper operation of climate control
Ensure proper heating and A/C cooling and open all panel
vents for all zones
• Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
Settings
• Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
• Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
• Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
• Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance > Parking Aid”
• Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
• Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
Media / Radio / SAT
• Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Audi connect® (USA ONLY) (if equipped)
• Connect the dealer demo SIM card to verify system
connects to mobile network
Connect the AT&T dealer demo SIM card to the vehicle and
make sure the system fully connects to the wireless network
(LTE symbol with service bars)(only applies if in an AT&T
service area)
Model Year 2018 | Audi Pre-Delivery Reference Document | 25
R8 Coupe/R8 Spyder
Technician Reference Document
Audi connect® (USA ONLY) (if equipped) (continued)
Driving Performance (continued)
• Verify Audi connect® Information Packet is present (if
equipped)
• Calibrate rear view mirror
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
• Turn on the wireless network (if equipped)
Ensure the wireless network is turned on (TEL function button > Settings Ctrl button > Wi-Fi® settings > Wi-Fi® active >
select “Visible”)
Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
Driver Assistance
• Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
• Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
• Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI__XXXX,” where XXXX
is the last four digits of VIN. Via Telephone > Options > WiFi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings >
Access point (SSID)
• Enable Google EarthTM (if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
• Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
• Inspect wheel bolts for proper torque
Convertible Functionality (if equipped)
• Test operation of power folding top
Perform with engine running to conserve battery power
Post-Road Test Inspection
• Perform a battery test
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
• Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
Use torque wrench to verify
• Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
• Verify engine performance and acceleration
Listen for abnormal noise/vibrations
• Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
Effective 11-1-2017-US
Version 1.6
Model Year 2018 | Audi Pre-Delivery Reference Document | 26
TT Coupe & Roadster/TTS/TT RS
Technician Reference Document
Vehicle Preparation
Interior (continued)
• Deactivate vehicle transport mode
• Verify proper operation of climate control
This step must be performed with the ignition on/engine
off or the 03 brake module may remain in transport mode.
See TSB 2042954 for resolution.
Deactivate vehicle transport mode (via Special functions >
PDI service > 19-Transport mode activating/deactivating.)
• Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
Using ODIS, right click the 5F-Information control unit 1, and
select Guided Functions > 5f-Adaptations > Storage of music
activating/deactivating (option 2) and when prompted for
the Optical drive, choose option 1 for “On”
• Set service reminder
via Special functions –> PDI service –> 17-PDI-resetting SRI
at PDI, counter reset, etc
• Perform any open campaigns
Follow instructions listed in campaign documentation
Exterior
• Check all key buttons and features
Check functionality of all keys. Verify vehicle starts and runs
with all keys and the start/stop button. Verify all doors and
trunk remotely lock/unlock with all keys, including all door
handle sensors with Advanced Key (if equipped)
Trunk Inspection
• Install wheel bolt cover removal tool from PDI kit into
trunk tool kit
Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit
• Set spare tire pressure
See separate “2018 Normal Load Condition Tire Pressure
Table” posted on ServiceNet under Pre-Delivery Inspection
• Check battery clamps for proper torque
Refer to Elsa Pro for specification
Ensure proper heating and A/C cooling and open all panel
vents for all zones
• Inspect operation of all power outlets
Inspect operation of front outlet, aux. outlet under armrest,
and rear outlets
Settings
• Set Time source setting to “GPS” and set Auto daylight
savings time to “on.”
Change time zone appropriate to the dealer location
• Verify and set language and measurement units
This can be changed in the Settings menu by going to Menu >
Vehicle > Vehicle settings
• Verify Speech Dialog System is operating
Press the “Talk” button and verify several commands
• Set “Entertain. Fad.” in Parking aid to an audible level
Via “Menu > Vehicle > Left Option > Driver Assistance > Parking Aid”
• Set “Music volume while parking” to 6 lines
Accessed via MMI rear view camera display, Settings > Music
volume while parking (applies to vehicles with park assist or
rear view camera)
• Set dealership location in navigation (if equipped)
Set dealership location for following back to dealership
during road test
• Turn off Manual Speed Warning (if equipped)
This can be changed in the Driver Assistance settings by
going to Menu > Vehicle > Driver Assistance > Speed Warning
> Manual->Select Off
Media / Radio / SAT
• Verify HD Radio is turned “off”
This can be found in the Radio/Settings Menu
Interior
Audi connect® (USA ONLY) (if equipped)
• Check operation of window, lock, and seat controls
• Verify Audi connect® Information Packet is present (if
equipped)
Check operation of all switches: Locks, windows, seat adjustment, heated seats (if equipped) and child safety features
• Inspect mirrors for proper operation
Inspect folding, adjustments, right side tilt in reverse, heating
• Check rear view mirror operation
Check self-dimming function/lighting (if equipped)
Effective 11-1-2017-US
Version 1.6
Verify Audi connect® Information Packet is present, including Audi brochure, AT&T brochure, AT&T Terms & Conditions
(T&C) (if applicable)
• Turn on the Wi-Fi® hotspot (if equipped)
Ensure the wireless network is turned on (Telephone > Options > Wi-Fi® options > Wi-Fi® Mode “Hotspot”)
Model Year 2018 | Audi Pre-Delivery Reference Document | 27
TT Coupe & Roadster/TTS/TT RS
Technician Reference Document
Audi connect® (USA ONLY) (if equipped) (continued)
Post-Road Test Inspection
• Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)
• Perform a battery test
Check Wi-Fi® hotspot functionality is enabled and verify the
Access point (SSID) is set to “Audi_MMI__XXXX,” where XXXX
is the last four digits of VIN. Via Telephone > Options > WiFi® options > Wi-Fi® Mode “Hotspot” > Hotspot settings >
Access point (SSID)
• Enable Google EarthTM (if equipped)
Enable Google EarthTM in the Navigation > Map Settings and
verify the white Google logo appears in the bottom right
hand corner of the MMI screen
On-Hoist Inspection
Perform the A-battery test for new batteries using GFF in
ODIS Diagnosis –> Special functions –> PDI service. Select
option 2, the battery test for new batteries as part of the
pre–delivery inspection and act according to the test result
(ok, recharge, replace). Ensure diagnosis log is uploaded to
the GFF paperless server by selecting “ok” when tester wants
to send the current generated diagnosis protocol online.
(Note: Do not use Guided Function. The diagnosis log will not
be uploaded to GFF paperless)
• Check engine oil level
Fill oil to the max level when the vehicle is at operating temperature
• Install wheel bolt covers and center caps as supplied
Wheel bolt covers and center caps can be found in the PDI kit
• Inspect wheel bolts for proper torque
Use torque wrench to verify
• Set and store tire pressures for either sold vehicle OR stock
inventory vehicle
If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2018 Normal Load Condition Tire Pressure Table” posted on ServiceNet. If going to stock, set to
maximum recommended tire pressures listed on the B-pillar
door jamb, and store tire pressure values in Car/System menu
Driving Performance
• Verify engine performance and acceleration
Listen for abnormal noise/vibrations
• Test drive vehicle applying brakes several times
Apply brakes at least 4 times at 20 mph (35 km/h) to clean
brake rotors. Check for abnormal noise/vibration/pulsation
Driver Assistance
• Verify operation of parking system (if equipped)
Verify operation of Audi parking system sensors with rear
view camera (if equipped)
Convertible Functionality (if equipped)
• Test operation of power folding top
Perform with engine running to conserve battery power
Effective 11-1-2017-US
Version 1.6
Model Year 2018 | Audi Pre-Delivery Reference Document | 28
- 【Looking for More Professional Vehicle Scan...
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E...
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E...
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is...
- 【118+ Real Time Record & Live Graph View】iCarsoft E...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: PDI 2018 Audi Te
Replacement Service Bulletin Number:
MFR Communication Date: 2017-11-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- 【2026 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2026 CRP123I V3.0 car diagnostic scanner has a new processor✅Android 8.1, 2+64GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery✅FCA SGW, New Protocol CANFD & DoIP✅Work with BST360 Battery Tester & i-TPMS Tire Pressure Detector Tool（Purchase Separately）✅2.4&5GHz dual WiFi,One-touch Lifetime Free update for 100+ Global brands(1996-2026),help you access,diagnose and fix more vehicles faster,upgrade of CRP123I V2.0.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2026 New Ver. scan tool CRP123I V3.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, DPF Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V3.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via Wifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Lifetime Free Update + FCA SGW +CAN FD & DoIP】This scan tool features One-click wifi update and fre e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V3.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW);New Protocol CANFD & DoIP cover more newer car and boost 4X faster data transfer（need extra adapters).
- 【Cover 10000+ Models & 100+ Car Brands】CRP123I V3.0 Elite code reader for cars and trucks is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2026 and 90+ car makes worldwide. Support almost all 12V OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls reach us via Q&A/message before purchase.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.