NHTSA ID Number: 10133328
Manufacturer Communication Number: Circular-Emissio
TSB/Document Date: 2018-04-16
Summary
Over time and mileage and under certain conditions, the factory-installed catalysts may not perform as required by Federal regulations. If the effectiveness of a catalyst is reduced, this may result in an increase in tailpipe emissions and the vehicle could fail to pass an emissions inspection. ? Added repair availability for A8 (criteria 4E) and A6 (criteria 4F). ? Updated claiming instructions. ? Note added to repair instructions regarding consequential damage.
DRAFTDD
Emissions Recall
Code: 26J2
REVISION
Subject
Catalysts
Revision Summary
Release Date
Affected Vehicles
•
Added repair availability for A8 (criteria 4E) and A6 (criteria 4F).
•
Updated claiming instructions.
•
Note added to repair instructions regarding consequential damage.
February 19, 2018
U.S.A. & CANADA: Certain 2008-2011 MY Audi
Vehicles with 4.2L FSI Gasoline Engine
•
•
•
2008 MY Audi
A8
2008-2011 MY Audi
A6 Sedan
2008-2010 MY Audi
S5 Coupe
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
•
Campaign status must show “open.”
•
If Elsa shows other open action(s), inform your customer so that the work can also be
completed at the same time the vehicle is in the workshop for this campaign.
Problem Description
Over time and mileage and under certain conditions, the factory-installed catalysts may not
perform as required by Federal regulations. If the effectiveness of a catalyst is reduced, this
may result in an increase in tailpipe emissions and the vehicle could fail to pass an emissions
inspection.
Corrective Action
To ensure that the vehicle continues to meet emissions regulatory requirements, improved
catalysts will be installed in affected vehicles.
Vehicle Repair Availability:
Criteria
Model
Repair Availability
8T
S5
RELEASED
4E
A8
RELEASED
4F
A6
RELEASED
Parts Information
Parts were allocated prior to owner notification. If allocated parts have been used and your
dealership is at the weekly Upper Order Limit, please submit the backordered sales document
number to upperorderlimits@audi
.com to have additional parts released.
Code Visibility
On or about December 29, 2017, affected vehicles were listed on the Inventory Vehicle Open
Campaign Action report under My Dealership Reports (found on www.accessaudi.com & OMD
Web). A list was not posted for dealers who did not have any affected vehicles.
On or about December 29, 2017, this campaign code showed open on affected vehicles in Elsa.
On or about December 29, 2017, affected vehicles were identified with this campaign code in
the VIN Lookup tool at www.audiusa.com.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 1 of 23
Owner Notification
Owner notification for S5 vehicles took place in December 2017, followed by A6/A8 owner
notification in February 2018. Owner letter examples are included in this bulletin for your
reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.accessaudi.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at
www.accessaudi.com.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi
dealer. 2018 Audi
Group of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 2 of 23
Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit the request through Audi
Warranty Online under the Campaigns/Update option.
Canada dealers: Upload the repair order to Audi
WIN/Operations/Campaign Closure.
Service Number
26J2
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Mark Catalyst* as causal part
Do not claim wash/loaner under this action
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 3 of 23
Criteria I.D.
8T
Replace catalysts - S5 w/ Automatic Transmission.
Labor operation:
Quantity
1.00
1.00
2.00
2.00
2.00
2.00
2.00
2.00
12.00
6.00
2673 19 99
Part Number
8K0254252BX
8K0254200LX
1K0253141N
8K0253115A
8K0253115K
N 02300313
N 10518405
N 90666003
N 91130801
N 91151101
540 T.U.
Description
Catalyst* - Right
Catalyst* - Left
Exhaust Clamp
Gasket - Catalyst to Manifold
Gasket - Catalyst to Exhaust Pipe
Nut - Bracket to Cat
Bolt- Steering Shaft
O - Ring ATF Line
Nut - Catalysts
Subframe Crossbrace Bolts
-ORReplace catalysts - S5 w/ Manual Transmission from VIN 8T_8_023117 to
FR_A_085253
Labor operation:
Quantity
1.00
1.00
2.00
2.00
2.00
Up to 40.00
2.00
1.00
1.00
6.00
12.00
1.00
1.00
4.00
2.00
12.00
6.00
2.00
6.00
2.00
2673 20 99
Part Number
8K0254252BX
8K0254200LX
1K0253141N
8K0253115A
8K0253115K
G 013A8JS0
N 02300313
N 10139201
N 10518405
N 10719001
N 90441103
N 90761102
N 90912501
N 91129601
N 91129901
N 91130801
N 91143203
N 91150701
N 91151101
N 91153201
1200 T.U.
Description
Catalyst* - Right
Catalyst* - Left
Exhaust Clamp
Gasket - Catalyst to Manifold
Gasket - Catalyst to Exhaust Pipe
Engine Coolant
Nut - Bracket to Catalyst
O-Ring - Right Coolant Pump to Flange
Bolt - Steering Shaft
Driveshaft Bolts
Bolt – Axle Shaft to Transmission
Nut - Gearshift Lever to Transmission
O-ring - Coolant Flange to Head
Bolt - Transmission to Engine
Bolt - Transmission to Engine
Nut - Catalysts
Bolt - Clutch Module to Drive Plate
Bolt - Transmission to Engine
Subframe Crossbrace Bolts
Bolt - Transmission to Engine
-ORContinued on next page.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 4 of 23
Replace catalysts - S5 w/ Manual Transmission from VIN 8T_ 8_005688 to
8T_8_023116.
Labor operation:
Quantity
1.00
1.00
2.00
1.00
1.00
2.00
2.00
Up to 40.00
2.00
2.00
1.00
2.00
2.00
2.00
2.00
1.00
2.00
6.00
3.00
1.00
2.00
12.00
6.00
8.00
Criteria I.D.
2673 21 99
Part Number
8K0254252BX
8K0254200LX
1K0253141N
4E0260749A
8E0260749C
8K0253115A
8K0253115K
G 013A8JS0
N 02300313
N 10106402
N 10139201
N 10241202
N 10255501
N 10286110
N 10425302
N 10518405
N 10699901
N 10719001
N 90761102
N 90912501
N 90986501
N 91130801
N 91151101
WHT005657
1250 T.U.
Description
Catalyst* - Right
Catalyst* - Left
Exhaust Clamp
A/C line O-ring
A/C line O-ring
Gasket - Catalyst to Manifold
Gasket - Catalyst to Exhaust Manifold
Engine Coolant
Nut - Bracket to Catalyst
Nut - Lower Control Arm
O-Ring - Right Coolant Pump to Flange
Bolt - Lower Control Arm
Power Steering Line Hose Clamp
Nut - Upper Guide Link
Bolt - Upper Guide Link
Bolt- Steering Shaft
Bolt - Stabilizer Link
Driveshaft Bolts
Nut - Gearshift Lever & Lock Carrier
Brace
O-ring - Coolant Flange to Head
Fuel Line Clamps
Nut - Catalysts
Subframe Crossbrace Bolts
Subframe Bolt
4E
Replace catalysts.
Labor operation:
Quantity
1.00
1.00
2.00
2.00
2.00
Up to 40.00
2.00
2.00
20.00
2.00
4.00
6.00
2.00
2673 22 99
Part Number
079253019JX
079253020JX
079253039F
1K0253141N
8D0253115C
G 013A8JS0
N 02300313
N 90329206
N 90894601
N 91001302
N 91024802
N 91130801
WHT001011
1080 T.U.
Description
Catalyst* - Left
Catalyst* - Right
Gasket
Exhaust Clamp
Gasket
Engine Coolant
Nut - Bracket to Catalyst
Engine Mount Bolt
Nuts
Subframe Bolt
Engine Carrier
Bolt
Nut - Catalysts
Coolant line to Alternator O-ring
Continued on next page.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 5 of 23
Criteria I.D.
4F
Replace catalysts.
Labor operation:
Quantity
1.00
1.00
2.00
2.00
2.00
Up to 40.00
2.00
20.00
3.00
6.00
2.00
2673 23 99
Part Number
079253019JX
079253020JX
079253039F
1K0253141N
8D0253115C
G 013A8JS0
N 02300313
N 90894601
N 91048401
N 91130801
WHT001011
870 T.U.
Description
Catalyst* - Left
Catalyst* - Right
Gasket
Exhaust Clamp
Gasket
Engine Coolant
Nut - Bracket to Catalyst
Nut – Catalyst to Engine
Subframe Bolt
Nut - Catalysts
Coolant line to Alternator O-ring
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 6 of 23
Customer Letter Example (United States)
This notice applies to your vehicle:
Subject: Emissions Recall 26J2 – Catalysts
Certain 2008-2011 Model Year Audi
Vehicles with 4.2L FSI Gasoline Engine
Dear Audi
Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are informing
you of our decision to conduct an emissions recall on certain 2008-2011 model year Audi
4.2L FSI gasoline engine vehicles. Our
records show that you are the owner of a vehicle affected by this action.
What is the issue?
Over time and mileage and under certain conditions, the factory-installed catalysts may not
perform as required by Federal regulations. If the effectiveness of a catalyst is reduced, this may
result in an increase in tailpipe emissions and the vehicle could fail to pass an emissions
inspection.
What will we do?
To ensure that the vehicle continues to meet emissions regulatory requirements, your authorized
Audi
dealer will install improved catalysts. This work will take up to two days to complete and will
be performed for you free of charge. Please keep in mind that your dealer may need additional
time for the preparation of the repair, as well as to accommodate their daily workshop schedule.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi
dealer as soon
as possible to schedule this service. For your convenience, you can also visit www.audiusa.com
and click on the “Find a Dealer” link to locate a dealer near you and schedule this service.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please forward
this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have
changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card
and mail it to us so we can update our records.
Important information for California regulations require that this campaign be completed prior to the time you renew your
California Vehicle Owners vehicle registration. Therefore, please make sure that this campaign is completed prior to
the renewal of your vehicle registration, and that you furnish proof of completion to the
– California Regulations
Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair order, including
a signed “Proof of Correction” certificate. You obtain this from your dealer after the campaign has
been completed. Please retain the signed “Proof of Correction Certificate” with your vehicle
records. DO NOT MAIL THIS FORM to the DMV, unless requested.
Reimbursement of
Expenses
If you have previously paid for repairs relating to the condition described in this letter, the
enclosed form explains how to request reimbursement. We would be pleased to review your
reimbursement request.
Can we assist you
further?
If your authorized Audi
dealer fails or is unable to complete this work free of charge within a
reasonable time, please contact Audi
Customer Experience at 1-800-253-2834 or via our
“Contact Us” page at www.audiusa.com.
Checking your vehicle for
open Recalls and Service
Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please
visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle
Identification Number (VIN).
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Audi
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2018 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
February 2018
26J2 Page 7 of 23
Customer Letter Example (CANADA) S5 VEHICLES ONLY – DECEMBER 29, 2017 REPAIR DATE
This notice applies to your vehicle:
Subject: Emissions Recall 26J2 – Catalysts
Certain 2008-2011 Model Year Audi
Vehicles with 4.2L FSI Gasoline Engine
Dear Audi
Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act, 1999. Audi
has
determined that a defect, which relates to a prescribed emission standard, exists in certain 2008-2011 model year Audi
4.2L FSI
gasoline engine vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Over time and mileage and under certain conditions, the factory-installed catalysts may not
perform as required by Federal regulations. If the effectiveness of a catalyst is reduced, this may
result in an increase in tailpipe emissions and the vehicle could fail to pass an emissions
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular-Emissio
Replacement Service Bulletin Number:
MFR Communication Date: 2018-02-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




