NHTSA ID Number: 10133236
Manufacturer Communication Number: V581603-2039212
TSB/Document Date: 2018-04-16
Summary
58 16 03 June 13, 2016 2039212 Supersedes Technical Bulletin 581503 dated July 21, 2015 to update Claim Processing statement. Corrosion on Rear Door in Trim Strip Area
Technical Bulletin
Model(s)
Year
Eng. Code
Trans. Code
VIN Range From
VIN Range To
Passat
2006 – 2010
All
All
All
All
Passat Wagon
2006 – 2010
All
All
All
All
CC
2009 – 2012
All
All
All
All
Condition
58 16 03 June 13, 2016 2039212 Supersedes Technical Bulletin 581503 dated July 21, 2015 to update Claim
Processing statement.
Corrosion on Rear Door in Trim Strip Area
Figure 1 (the red ellipses show the area which can be affected by the corrosion)
Note:
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and Procedures
Manual.
Documentation required per Warranty Policies and Procedures Manual.
For vehicles outside of the Limited Warranty Against Corrosion Perforation this Technical Bulletin is for
information only.
Page 1 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Technical Background
Because of incomplete bonding of the trim strip (Figure 2, red circle) water can get between trim strip and door.
Because of water ingress, corrosion is possible in the area of the guide holes (Figure 1, red circles).
Figure 2 (the red circle shows the opening of the incomplete bonding)
Production Solution
Not Applicable.
Page 2 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Service
1a. Repair Rear Door Only perform this operation if the total repair cost is 80% or less of the total replacement
cost.
Or
1b. Replace Rear Door
Step 2 needs to be completed regardless of a repair or replacement.
2. Replace the Trim strip and apply butyl sealer on trim strip:
1a. Repair the rear door as follows:
Disassemble the door according to the repair manual. See Repair Group 58 in Elsa
Remove the corrosion on the inner and outer door in the area of the guide holes using a pneumatic brush
grinder.
Note:
If through-corrosion (perforation) is not present, door replacement will only be accepted if it qualifies per the
Reimbursement Policy section of the Warranty Policies and Procedure Manual. This section provides important
guidelines when considering component repair vs. replacement options (the “80% rule”).
Apply a VOC compliant epoxy primer as an anti-corrosion treatment and primer to both sides of the door
(locally sourced).
Repaint the rear door according to Volkswagen
guidelines.
1b. Replace the rear door as follows:
Replace the door according to the repair manual. See Repair Group 58 in Elsa
Paint the rear door according to Volkswagen guidelines.
Page 3 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
2. Replace the Trim strip and apply butyl sealer on trim strip:
To avoid repeated water ingress, close the open areas on the trim strips in the end points of the adhesive tape
with butyl sealing cord (part number AKL 450 005 05 - Figure 3 and 4, red arrows).
Figure 3 (rear end of a trim strip)
Figure 4 (front end of a trim strip)
Form two balls of butyl sealing cord (part number: AKL 450 005 05) per trim strip with a diameter of 4-5 mm.
Attach the butyl balls centrally in the end areas of the trim strip from the inside (Figures 5 and 6).
Figure 5 (rear trim strip area)
Page 4 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Figure 6 (rear trim strip area)
The open areas of the adhesive tape must be closed by pressing the butyl balls into the gaps of the tape
(Figure 7).
Figure 7 (front trim strip area)
Install the trim strip on the door according to the repair manual. See Repair Group 66 in Elsa.
Apply cavity wax on the inside of the door around the holes that the trim strip secures.
Assemble and reinstall the door according to the repair manual. See Repair Group 58 in Elsa.
Page 5 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Warranty
Note:
Dealers may complete the repair as described without prior authorization (through a WISE Warranty Repair
Acceptance request).
Documentation required: Clear pictures, completed estimate and body shop invoice must be saved and kept
on file at the Dealership for audit purposes.
This bulletin applies for 1 door repair or replacement. If both doors exhibit the corrosion they should be
evaluated individually and claimed on separates lines. Total Body Painting Prep Time for both doors should be
claimed on the first line only.
Labor time units (TU), Material units (MU), and Material unit rate are correct at the time of publication. The
time units and/or material units may differ if the repair catalogue is updated. The information in the repair
catalogue applies, except for the open time items (labor operations ending in 99) which are calculated at
actual time multiplied by the body shop labor rate. The material allowance (Paint material price per unit) is
subject to change. Refer to WISE > Resource Center > Forms > Paint/Corrosion for the most current
forms.
This section is applicable for vehicles within the terms of Volkswagen’s Limited Warranty Against Corrosion
Perforation. For vehicles outside the terms of the Limited Warranty Against Corrosion Perforation this section
is for information only.
This bulletin may be provided to outside shops to ensure the proper repair is completed.
Note:
Claim Processing
Utilize the attached form examples and pre-populated forms on WISE to assist with calculating the
reimbursement amounts. This will expedite the claim review process and reduce the time to pay the claim.
Note that miscalculations are subject to claim adjustment. You can email completed excel forms (in the excel
format) to paintcamp@vw
.com. The Paint and Corrosion Team will review your completed form(s) and adjust for
overlap on behalf of the dealer.
For the complete set of pre-populated Paint/Corrosion Claim Form templates associated with this Technical
Bulletin, refer to WISE > Resource Center > Forms > Paint/Corrosion.
Page 6 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
Passat
2006 – 2010
All
All
All
All
Passat Wagon
2006 – 2010
All
All
All
All
CC
2009 – 2012
All
All
All
All
SAGA Coding
Claim Type:
1601)
Damage
Service Number:
Code
5829
0003
HST
Damage Location
(Depends on Service
No.)
--
160 or 162
CC (357)
160 or 1622)
Passat Sedan and Passat Wagon
(3C*)
160 or 1622)
Parts Manufacturer
Repair
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials
MU @ $12 per unit
Epoxy Primer (Locally Sourced)
Claim Dollar Amount (MAX: $40)
Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
- L0020000: External Painting-metallic/2-layer
Claim Dollar Amount
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
- A0041000: Body Shop repair no paint
Claim Dollar Amount
Page 7 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Replace
Please use the following part number in “Outside Materials” 4)
LACKMATF: Paint and Materials
MU @ $12 per unit
Please use the following Labor Operation in “Outside Labor” 4)
Select the appropriate Labor Operation below:
- L0010000: External Painting-straight color
- L0020000: External Painting-metallic/2-layer
Claim Dollar Amount
- L0030000: External Painting-pearl color
Use this for all body repair in this bulletin:
Claim Dollar Amount
- A0041000: Body Shop repair no paint
Causal Part:
L00#0000
Diagnostic Time 4)
GFF Time expenditure
01500000 = 00 TU max.
NO
Road Test
01210002 = 00 TU
NO
01210004 = 00 TU
Technical Diagnosis
01320000 = 00 TU
NO
Claim Comment: Input “As per Technical Bulletin 2039212” in comment section of Warranty Claim.
1)
For Vehicles outside the Limited Warranty Against Corrosion Perforation this bulletin is information only
2)
Corrosion claim vendor code will be the damage location.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
5)
See attachment “srt_reference_table.pdf” for labor time reference.
Page 8 of 9 Plus attachments
© 2016 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Required Parts and Tools
Repair and Replace
Part number
Designation
AKL 450 005 05
Butyl sealing cord (Quantity 0.05)
One of the following
3C0 853 753 C 2ZZ
Rear Left Door Trim Strip
3C0 853 754 C 2ZZ
Rear Right Door Trim Strip
Replace (One of the following)
3C5 833 055 H
Rear Left Door
3C5 833 056 H
Rear Right Door
For Special Tools see Repair Manual.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: V581603-2039212
Replacement Service Bulletin Number:
MFR Communication Date: 2016-06-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE:BODY:DOOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




