NHTSA ID Number: 10132478
Manufacturer Communication Number: T-SB-0233-17_Rev
TSB/Document Date: 2018-04-02
Summary
TSB: REVISION NOTICE September 20, 2017 Rev1: The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2012 ? 2015 model year Tacoma vehicles may exhibit rust spots on the B-pillar and/or C-pillar (double cab only) area on either or both driver and passenger side. Repairing/repainting and installation of paint protective films in the affected areas will be required to address this condition. The paint repair may need to be sublet to a body shop. Share this Service Bulletin information with your sublet body shop.
T-SB-0223-17
Rev1
June 12, 2017
Spot Corrosion on B-Pillar and/or C-Pillar
Service
Category
Vehicle Exterior
Section
Paint/Coatings
Market USA
Applicability
YEAR(S)
MODEL(S)
ADDITIONAL INFORMATION
2012 - 2015
Tacoma
WMI(s): 3TM, 5TF
REVISION NOTICE
September 20, 2017 Rev1:
The Warranty Information section has been updated.
Any previous printed versions of this bulletin should be discarded.
0
Introduction
Some 2012 – 2015 model year Tacoma vehicles may exhibit rust spots on the B-pillar and/or
C-pillar (double cab only) area on either or both driver and passenger side.
Repairing/repainting and installation of paint protective films in the affected areas will be required
to address this condition. The paint repair may need to be sublet to a body shop. Share this
Service Bulletin information with your sublet body shop.
NOTE
If this condition is present in AT LEAST one door, ALL doors MUST receive paint protective film.
© 2017 Toyota
Motor Sales, USA
Page 1 of 7
T-SB-0223-17
Rev1
June 12, 2017
Page 2 of 7
Spot Corrosion on B-Pillar and/or C-Pillar
Warranty Information
OP CODE
CABIN TYPE
DESCRIPTION
TIME
Repaint Front Door, RH
1.8*
Repaint Front Door, LH
1.8*
BD1621B
Install Paint Protective Film
0.3
BD1622
Repaint Front Door, RH
1.8*
BD1622A
Repaint Front Door, LH
1.8*
BD1623
Repaint Rear Door, RH
1.8*
BD1623A
Repaint Rear Door, LH
1.8*
BD1622B
BD1623B
Install Paint Protective Film
0.3
BD1624
Repaint Front Door, RH
1.8*
BD1624A
Repaint Front Door, LH
1.8*
BD1625
Repaint Rear Door, RH
1.8*
BD1625A
Repaint Rear Door, LH
1.8*
BD1624B
BD1625B
Install Paint Protective Film
0.6
BD1621
BD1621A
Single
Access
Double
OFP
T1
T2
67
17
67111-04060
67112-04070
67111-04060
67112-04070
67113-04031
67114-04031
67111-04060
67112-04070
67113-04020
67114-04020
*2.8 for BOTH sides or 5.6 max for ALL four panels.
Sublet cost for paint material in case of in-house paint shop.
Sublet invoice from third party (external paint shop) in case of no in-house paint shop.
APPLICABLE WARRANTY
This repair is covered under the Toyota Corrosion Perforation Warranty. This warranty is in
effect for 60 months (unlimited mileage) from the vehicle’s in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
© 2017 Toyota Motor Sales, USA
T-SB-0223-17
Rev1
June 12, 2017
Page 3 of 7
Spot Corrosion on B-Pillar and/or C-Pillar
Parts Information
CAB TYPE
PART NUMBER
PART NAME
QTY
67855-04030
Protector, FR Door Panel, RH
1
67856-04030
Protector, FR Door Panel, LH
1
67855-04030
Protector, FR Door Panel, RH
1
67856-04030
Protector, FR Door Panel, LH
1
67855-04030
Protector, FR Door Panel, RH
1
67856-04030
Protector, FR Door Panel, LH
1
67857-04010
Protector, RR Door Panel, RH
1
67858-04010
Protector, RR Door Panel, LH
1
Single
Access
Double
Repair Procedure
1. Inspect the vehicle for rust spots.
Are ANY rust spots present on the B- or C-pillar area?
YES — Sublet to a body shop for repair, then continue to step 2.
NO — This bulletin does NOT apply. Continue diagnosis using the applicable
Repair Manual.
2. Open the window and partially remove the
door glass run as shown.
Figure 1.
3. Clean the surface with mild soap and water to remove ANY dirt and debris, then wipe dry.
© 2017 Toyota Motor Sales, USA
T-SB-0223-17
Rev1
June 12, 2017
Page 4 of 7
Spot Corrosion on B-Pillar and/or C-Pillar
Repair Procedure (Continued)
4. Confirm tape application position by fitting shape to window frame. Use the positioning marker
on the door to line up with the positioning marker on the pre-cut paint protective film.
Figure 2.
5. Peel off the front half of the white tape backing paper from the paint protective film.
NOTE
Apply water to your hands before handling the film. It is important to keep hands wet while
working with the film.
© 2017 Toyota Motor Sales, USA
T-SB-0223-17
Rev1
June 12, 2017
Spot Corrosion on B-Pillar and/or C-Pillar
Repair Procedure (Continued)
6. Apply water to the sticky surface of the film
to ensure that the film can be repositioned
during installation.
Figure 3.
7. Attach the front half of the paint protective
film to the door. Align the position markers
on the paint protective film with the position
markers on the door as shown in step 4.
Figure 4.
© 2017 Toyota Motor Sales, USA
Page 5 of 7
T-SB-0223-17
Rev1
June 12, 2017
Page 6 of 7
Spot Corrosion on B-Pillar and/or C-Pillar
Repair Procedure (Continued)
8. Remove ALL water and air bubbles trapped
under the paint protective film using a
plastic spatula or similar tool.
Figure 5.
9. Remove the remaining backing paper.
10. Apply water to the newly exposed paint protective film to make sure that the film can be
adjusted during installation.
11. Attach the remaining paint protective film
to the door. Remove ALL water and air
bubbles by using a plastic spatula or a
similar tool.
Figure 6.
© 2017 Toyota Motor Sales, USA
T-SB-0223-17
Rev1
June 12, 2017
Page 7 of 7
Spot Corrosion on B-Pillar and/or C-Pillar
Repair Procedure (Continued)
12. Remove the backing film from the top
surface of the paint protective film.
Figure 7.
13. Reinstall the door glass run.
14. Confirm the repair.
15. Repeat steps 1 – 14 for ALL doors.
NOTE
For double cab, apply this Repair Procedure to the C-pillar area.
16. After the Repair Procedure is complete, notify the customer of the following:
Do NOT use a carwash for AT LEAST 24 hours AFTER installation.
Keep the vehicle out of the rain for AT LEAST 24 hours AFTER installation.
Keep the vehicle in stable temperature for AT LEAST 24 hours AFTER installation.
© 2017 Toyota Motor Sales, USA
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0233-17_Rev
Replacement Service Bulletin Number:
MFR Communication Date: 2017-09-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
- Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More than 100+ car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Cost-effective Diagnostic Scan Tool】Lifetime updates without fee, No subscription fee required, No IP restrictions, Ediag Elite bluetooth scanner stands out. It can perform in-depth Full System diagnostics,15+ Reset Services, powerful Active Test, CANFD & FCA AutoAuth. Connect your phone via Bluetooth for diagnosis, providing a faster, smarter and smoother diagnostic experience. Easy to put in pocket, convenient to carry, keep track of the car's status anytime, anywhere. Best bang for your bucks.
- 【15+ Reset Service, Easy Problem Solving】 KINGBOLEN Ediag Elite obd2 scanner diagnostic scan tool comes with 15+ professional reset functions, including: Oil Reset, ABS Bleeding, Injector Code, SAS Reset, TPMS Reset, BMS Reset, AFS Reset, Sunroof Calibration, Brake Reset and more special functions in system diagnose menu. The ideal bluetooth scanner for mechanics and DIY enthusiasts, which can save unnecessary maintenance costs and significantly shorten repair time.
- 【Comprehensive Full Systems Diagnostic】 The Ediag Elite obd2 scanner bluetooth supports full system In-Depth diagnosis. It can read/clear fault codes, read real-time data/freeze frame, module information, and perform testing and reset functions for ECM, BCM, ABS, SRS, TPMS, TCM, BMS, SAS, A/C & RTM systems ect. It works with most car models after 1996, cover more than 150+ car brands. Supports 22 global languages for your convenience(EN, FR, ES, DE, IT, RU, PT, JP, TU...)
- 【Powerful Bidirectional Scan Tool & Active Test】 The obd2 code reader for Ediag Elite can perform real time active test that can send commands to the vehicle’s ECU to drive the actuators to work, such as turn on the radiator fan, modulate the throttle, open/close windows, etc. It can help you quickly find out the bad components and the cause of the fault, which can save you a lot of time. With BT 5.2 wireless connectivity, you can enjoy wireless diagnostics up to 33 feet.
- 【FCA AutoAuth & CANFD Compatibility】 Ediag Elite scan tool offers support with FCA Gateway Access, allowing you to perform protected functions on FCA vehicles, including Chrysler, Dodge, Jeep, Alfa Romeo, Fiat vehicles, etc.(Note:just allows you to access the FCA, but need to have your own FCA account) Supports the CAN-FD protocol, provide high-speed vehicle diagnostic communication and data transfer, working perfectly on GM vehicles produced after 2020, saving $100 to buy a CAN FD adapter.
This product presentation was made with AAWP plugin.
Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API