NHTSA ID Number: 10130407
Manufacturer Communication Number: 1207-15
TSB/Document Date: 2018-03-13
Summary
1207-15 Updated procedures with adding EPA10 to the GHG14 title
Ω
4 and ground
Ω
Acceptable Resistance
1Ω or less
Front Engine Side
Valve Cover 14 pin
connector #
Acceptable Resistance
1KΩ or greater
a. Yes; Go to step 14.
b. No; repair the engine side harness. Verify repairs.
NOTE: The use of extension harness J-49120 will ease installation of test MCM.
14. Install a test MCM.
15. Reconnect all connections and start engine. Bring to operating temperature of 71°C (160°F). Road test the vehicle for
30 minutes. Does fault become active?
a. Yes; repeat all steps. If results are the same, retain a log file of active fault and the measured resistance values
recorded in this procedure and contact the Customer Support Center at 800-445-1980 for further instructions.
b. No; Go to step 16.
16. Install original MCM. Bring to operating temperature of 71°C (160°F). Road test the vehicle for 30 minutes. Does fault
become active?
a. Yes; retain log file of active fault. Replace the MCM. Refer to section "Removal of the Motor Control Module".
b. No; release vehicle.
18
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 12 07-15
12 07-15
5
SPN 654/FMI 6 - EPA10 - GHG14
Injector Cylinder #4 Needle Control Valve Shorted Circuit
Table 16.
SPN 654/FMI 6
Description
Injector Cylinder #4 Needle Control Valve Shorted Circuit
Monitored Parameter
Injector Cylinder #4 Needle Control Valve
Typical Enabling Conditions
Engine rpm = idle or higher
Monitor Sequence
None
Execution Frequency
Continuous when enabling conditions met
Typical Duration
Two Seconds
Dash Lamps
MIL, CEL
Engine Reaction
Derate 25%
Verification
Engine Idle (one minute)
Check as follows:
NOTE: Submit completed diagnostics with warranty claim.
NOTE: Injector chart PDF available on DDCSN/SUPPORT/SPECIALIZED SERVICE.
1. Check for multiple codes. Using DiagnosticLink ®, retain log file of active fault and clear codes (code active for one
key cycle).
All information subject to change without notice.
12 07-15
Copyright © 2016 DETROIT DIESEL CORPORATION
19
5 SPN 654/FMI 6 - EPA10 - GHG14
a. If SPN fault code 168 or 723/FMI any is present, service those faults first.
b. If SPN fault code 168 or 723/FMI any is NOT present, Go to step 2.
2. Check the warranty claim history. Check with driver. Is this the first occurrence of this fault within the last 30 days?
a. Yes; Go to step 3.
b. No; complete diagnostics, retain a log file of active fault and the measured resistance values recorded in this
procedure and contact the Customer Support Center at 800-445-1980.
WARNING: ENGINE EXHAUST
To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area.
Engine exhaust is toxic.
WARNING: PERSONAL INJURY
To avoid injury before starting and running the engine, ensure the vehicle is parked on a level
surface, parking brake is set, and the wheels are blocked.
3.
4.
5.
6.
Start and warm the engine until the coolant temperature is above 71°C (160°F).
Turn the engine OFF.
Disconnect the rear rocker cover 14–pin injector harness connector.
Inspect the rear fuel injector harness 14-pin injector connectors for bent or spread pins; inspect the connector seal for
damage (signs of water or oil intrusion).
a. If water or oil intrusion, bent or spread pins are found, repair as necessary.
b. If the connector shows no signs of damage, Go to step 7.
NOTE: DO NOT touch the metal ohmmeter leads with your hands when the measurements are made.
7. Using the appropriate chart below, measure and record the resistance values between the corresponding pins on the
valve cover side of the rear fuel injector harness listed below. Are the resistances within range?
20
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 12 07-15
12 07-15
Table 17.
Rear Fuel Injector Harness 14-Pin Connector Resistance Chart (Valve Cover Side)
Injector #4
Needle
Pins 1 and 2
Pins 1 and 8
Pin 2 and
ground
Pin 8 and
ground
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #5
Needle
Ω
Pins 1 and 3
Pins 1 and 9
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #6
Needle
Ω
Pin 3 and
ground
Ω
Ω
Pin 9 and
ground
Greater than
100kΩ*
Ω
Ω
Pins 1 and 4
Pins 1 and 12
Pin 4 and
ground
Pin 12 and
ground
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Ω
Ω
Ω
* = acceptable resistance
Table 18.
Rear Fuel Injector Harness 14-Pin Connector Resistance Chart (Using J-48671-10 Injector Breakout Box)
Note: Ensure J-48671-10 ground strap is connected to cylinder head.
Injector #4
Needle
Pins 3 and 4
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #5
Needle
Ω
Ω
Pins 3 and 4
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #6
Needle
Ω
Ω
Ω
Ω
Pins 3 and 4
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
1.3 to 2.5Ω*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Ω
Ω
Ω
* = acceptable resistance
a. Yes; Go to step 11.
b. No; Go to step 8.
8. Remove the rocker cover. Refer to section "Removal of the Rocker Cover".
9. Remove the rear fuel injector harness from the engine.
Refer to section "Removal of the Two-Piece Fuel Injector Wiring Harness - Three-Filter System".
Refer to section "Removal of the Two-Piece Fuel Injector Wiring Harness - Two-Filter System".
NOTE: DO NOT touch the metal ohmmeter leads with your hands when the measurements are made.
10. Using the chart below, measure and record the resistance values between the injector pins listed below. Are the
resistances within range?
All information subject to change without notice.
12 07-15
Copyright © 2016 DETROIT DIESEL CORPORATION
21
5 SPN 654/FMI 6 - EPA10 - GHG14
Table 19.
Injector Needle Resistance Chart (Injector Harness must be removed from engine)
Injector #4
Needle
Pins 3 and 4
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
2.0Ω or less*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #5
Needle
Ω
Ω
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
2.0Ω or less*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Injector #6
Needle
Ω
Pins 3 and 4
Ω
Ω
Ω
Pins 3 and 4
Pins 2 and 3
Pin 2 and ground
Pin 3 and
ground
2.0Ω or less*
Greater than
100kΩ*
Greater than
100kΩ*
Greater than
100kΩ*
Ω
Ω
Ω
Ω
* = acceptable resistance
a. Yes; replace the rear fuel injector harness.
Refer to section "Removal of the Two-Piece Fuel Injector Wiring Harness - Three-Filter System".
Refer to section "Removal of the Two-Piece Fuel Injector Wiring Harness - Two-Filter System".
b. No; replace the injector with the out-of-range resistance.
Refer to section "Removal of the Fuel Injector - Three-Filter System".
Refer to section "Removal of the Fuel Injector - Two-Filter System".
11. Disconnect the MCM 120-pin connector.
12. Inspect the MCM 120-pin connector and 120-pin harness connector for signs of corrosion, spread, unseated (pushed
out) or damaged pins, connector seal for damage (signs of water or oil intrusion) or signs of wire damage.
a. If signs of damage are found, repair as necessary. Verify repairs.
b. If no signs of damage, Go to step 13.
22
All information subject to change without notice.
Copyright © 2016 DETROIT DIESEL CORPORATION 12 07-15
12 07-15
NOTE: DO NOT touch the metal ohmmeter leads with your hands when the measurements are made.
13. Using the chart below, measure and record the resistance values between the engine side of the rear valve cover 14-pin
connector and the MCM 120-pin connector. Are the resistances within range?
Table 20.
Engine Harness Injector Circuit Resistance Table
Rear Engine Side Valve
Cover 14-pin connector
#
MCM 120-Pin Harness
Connector
Acceptable Resistance Rear Engine Side Valve Acceptable Resistance
1Ω or less
Cover 14 pin connector
1KΩ or greater
#
1
19
Ω
1 and ground
Ω
2
16
Ω
2 and ground
Ω
3
20
Ω
3 and ground
Ω
4
18
Ω
4 and ground
Ω
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 1207-15
Replacement Service Bulletin Number:
MFR Communication Date: 2015-12-07
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
and 64GB ROM, serving up to 5X faster than older MAX/
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it. Note: FCA AutoAuth is a third-party service, additional cost may be required.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions without annual fees for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball!
- 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Cost-effective OBD2 scanner】 Thinkcar Thinkdiag2 is the most powerful wireless diagnostic tool for it's price! Equipped with multi-functions of Newly added CAN-FD protocol, BiDirectional control(Active Test), 15 Maintenance resets, All Systems diagnosis, Auto VIN, FCA AutoAuth, Unlock the protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, and Fiat vehicles manufactured after 2019.120+ Car brands coverage, No IP limited, etc. Good for workshops & DIYers. Kindly send us VIN to check compatibility before purchase
- 【OE-Level Full Systems Car Scanner with Added CAN FD Protocol】 Upgrade of Thinkdiag, Thinkdiag2 is a bluetooth diagnostic tool can diagnose Full System such as ECM, ABS, SRS, TCM, EPB, TPMS, SAS, A/C, BMS, etc. Thinkdiag2 can read/clear fault codes, read real-time data, read control module information,etc. As the only diagnostic scanner in this price range that supports the CAN-FD protocol, it suits for the latest GM(2019-) , saving $100 to buy a CAN FD adapter, reducing the risk of undetected errors to enhancing the user experience
- 【Bidirectional Test】This bidirectional scan tool Thinkdiag2 allows you to send commands from your smartphone directly to the vehicle's ECU for active testing, quickly locate problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the diagnostic time and money. (Note: kindly send us VIN to check compatibility before order.)
- 【15+ Maintenance Functions】Thinkdiag2 OBDII code scanner is designed for individual car owners, DIYers, and small repair shops, which has a separate menu of 15 common special functions, such as Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, TPMS reset, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Maintenance functions that each car can do may be different
- 【120+ car brands & FCA Autoauth+10 languages】Thinkcar thinkdiag2 helps you to troubleshoot the problems fast for 100 + US, European, Asian vehicle brands after 1996 that use the OBDII protocol. Only support 12V cars, including gasoline cars and diesel cars. Supporting Autoauth allows you to unlock the protected FCA vehicle SGW module on Chrysler, Dodge, Jeep, Alfa Romeo, Fiat vehicles, etc. (Note: Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.) Multilingual function allows workshop mechanics to avoid language barriers and use it around the world Without restriction
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.