NHTSA ID Number: 10127569
Manufacturer Communication Number: VOS-15-08
TSB/Document Date: 2018-01-29
Summary
Service Information (Installation Phase 1 ? Preparation, License & Security Certificate Process Instructions): This document describes the preparation, license and security certificate processes required prior to installing ODIS Service diagnostic software on eligible diagnostic laptop and tablet devices. These instructions apply to the preparation of brand new diagnostic laptop and tablet devices, i.e.: devices where ODIS Service was NOT previously installed.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-15-08
Subject: Installation Phase 1 – Preparation, License & Security
Certificate Process Instructions
Date: Dec. 17, 2015
Supersedes VOS-14-31 & VOS-14-13 due to addition of Security Certificate process to Phase 1 instructions.
Table of Contents
Page
Section
1.0
Introduction
2
1.1
General Information - MUST READ!
2
1.2
Preparation Overview
2
1.3
License & Certificate Processes Overview- MUST READ!
2
2.0
Preparation
3
2.1
Diagnostic Device Hardware & Network Prerequisites
3
2.2
Supplementary Materials
3
2.3
Assign Device ID
4
2.4
Prepare License & Certificate Storage Folders
4
3.0
License Process
5
3.1
Request License (eShop)
5
3.2
Download & Store License
14
4.0
Security Certificate Process - MUST READ!
18
4.1
Request Security Certificate (eCRMS)
18
4.2
Download & Store Security Certificate
22
4.3
Import Security Certificate to Windows®
24
Notes:
• Please read these instructions carefully and in their entirety before performing any
procedures. If you do not understand these instructions, arrange to have a qualified person
perform these procedures.
• Heed all prerequisite requirements and notes, and follow all instruction steps in the Section
order given.
• Discard all printed copies of this document after use. Revised versions may be issued at any
time. Always check ServiceNet for the latest version.
Page 1 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.0 – Introduction
1.1 – General Information
This document describes the preparation, license and security certificate processes required prior to
installing ODIS Service diagnostic software on eligible diagnostic laptop and tablet devices. These
instructions apply to the preparation of brand new diagnostic laptop and tablet devices, i.e.: devices
where ODIS Service was NOT previously installed.
Instructions for the initial installation of ODIS Service are broken down into two separately-titled
instruction document “Phases”: Installation Phase 1 and Installation Phase 2. Both installation
instruction documents are posted on ServiceNet.
Checkboxes are provided throughout this document to note fulfilled prerequisites and completed sections.
1.2 – Preparation Overview
The preparation guidelines:
• Ensure diagnostic device eligibility for ODIS Service software installation and use.
• Physically identify individual diagnostic devices in workshop service.
• Suggest methods to store and manage the license and security certificate files after download.
1.3 – License & Certificate Process Overview
1.3.1 – License Request & Download
• An ODIS Service software license file must be requested, downloaded and stored. The file is then
retrieved and installed during the ODIS Service software installation process (Phase 2).
• License requests are submitted online via the eShop application administered by VWAG.
• License requests must be made using the diagnostic device on which ODIS Service will be
installed. This is necessary to associate the license with the unique hardware key of the device.
• Regardless if license requests are made for devices at a single-brand dealer or a dual-brand
dealer, only one license file is needed per device. The license file determines the brand-specific
diagnostic data that is installed and updated.
• Each license request is reviewed by VWGoA and approved or denied as applicable.
• When approved, a license approval notification email is sent to the email address entered in
the request. Please ensure that a valid email address is entered in the request. VWGoA and
VWAG are not responsible for misdirected license approval notification emails.
• License requests submitted before 1:00 PM EST are typically approved within three hours.
License requests submitted after 1:00 PM EST may take up to one business day for approval.
• License files must be downloaded from eShop directly to the diagnostic device, backed-up,
and then installed during the ODIS Service software installation process (Phase 2).
Page 2 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.3.2 – Security Certificate Request, Download & Import
• A security certificate file must be requested, downloaded and stored. The file is then retrieved and
imported to a Windows® certificate store before the ODIS Service software installation process.
• The certificate enables the authorized download, installation and update of ODIS Service software
from a Volkswagen
AG (VWAG) web-server, and allows diagnostic functions that require secure
online communication with various VWAG Group services.
• Certificate requests are submitted online via the eCRMS application administered by VWGoA. A
request form must be printed, signed and faxed to VWGoA.
• Certificate requests include entering the diagnostic devices’ unique hardware key (determined
during license request process) in the request form. This is necessary to associate the certificate
with the dealership and the devices’ hardware key.
• Regardless if certificate requests are made for devices at a single-brand dealer or a dual-brand
dealer, only one security certificate is needed per device.
• Each certificate request is reviewed by VWGoA and approved or denied as applicable.
• When approved, a certificate approval notification email is sent to the email address entered
in the request. Please ensure that a valid email address is entered in the request. VWGoA is not
responsible for misdirected certificate approval notification emails.
• Certificate requests are typically approved within one business day.
• Certificate files must be downloaded from eCRMS directly to a backup USB flash drive,
copied to the diagnostic device, and then imported to Windows.
2.0 – Preparation
2.1 – Diagnostic Device Hardware & Network Prerequisites
Windows 7
Device must have a functional CD/DVD drive and USB functions.
Network connection via Ethernet cable or WLAN enabled.
Antivirus software temporarily disabled (where applicable).
Device connected to A/C power adapter and booted to Windows desktop.
Diagnostic tablets: Connect USB mouse and keyboard for easier input.
2.2 – Supplementary Materials
Error-free license and certificate process management relies on identifying all diagnostic devices in
service and safely storing these files until they are needed. To enable this, obtain the following:
Self-adhesive labels. (Optional: permanent marker.)
USB Flash Drive (for license & certificate file backups).
Page 3 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.3 – Assign Device ID
We suggest assigning a device ID using the following method:
1. Apply a self-adhesive label to the diagnostic device in a clean, conspicuous area.
2. Mark the new devices’ model designation along with a numeric descriptor on the label (or directly to
the device with permanent marker) as per the following suggestions:
•
6150C_1, 6160A_1 (The underscore 1 indicates only one of each device is in service).
•
6150C_1, 6150C_2, 6150C_3 etc. (The underscore numbers indicate more than one of the
same device are in service).
2.4 – Prepare License & Certificate Storage Folders
We suggest the following method to prepare primary and backup storage folders. These serve to
organize and store the license and certificate files and record the device hardware key for future use.
1. Create the primary storage folder on the Windows desktop of the diagnostic device: Right-click >
New > Folder
2. Name this folder with the device ID assigned as per Section 2.3. This folder will be referenced
throughout the remaining instructions as the “device folder”.
3. Open the device folder and create two subfolders: Name the subfolders “License” and
“Certificate” respectively.
4. Create a Text document in the device folder: Right-click > New > Text document. Save the empty
text document as: “Hardware Key”.
Example: Illustrated below is a device folder created for a device identified as “VAS 6150C_1”:
5. Insert the backup USB flash drive into an available port on the diagnostic device.
6. Select and Copy the primary device folder to the backup USB flash drive directory.
7. Leave the backup USB flash drive connected with its directory accessible.
8. Minimize the primary and backup device folder windows.
Preparation steps completed. Proceed to Section 3.0 – Page 5
Page 4 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.0 – License Process
3.1 – Request License (eShop)
Prerequisites:
Person performing the request has access permission to the eShop application on vwhub.
(Permission must be granted by the dealership Systems Administrator.)
All Section 2.0 - Preparation steps completed!
Backup USB flash drive with device folder on hand.
The diagnostic device on which ODIS Service will be installed must be used to make the
license request.
1. Launch Internet Explorer
2. Logon to vwhub.com
3. From the main (top) menu, select the My Hub or Service tab.
4. From the left margin menu, select the link to ODIS – eShop.
Notes:
• First time users of eShop are prompted to register first before proceeding. Click the
Registration icon and fill in the required information.
When done, select the Register button, confirm the entered information, and then select Back to
home page.
• The eShop process screenshots illustrated on the following pages are for a dual brand dealer
request. Persons logging on to eShop from a single brand dealer will not see additional brand
selection and entry fields.
• Separate Dual-brand and Single-brand instruction callouts are included in the following
instructions steps where necessary.
• Dual-brand dealers must ALWAYS select BOTH the Volkswagen
and Audi
“Brand
products” during the request process!
(cont.)
Page 5 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. Click the Products Overview Icon:
6.
Select Offboard Diagnostic System Service via the Information Action arrow icon:
(cont.)
Page 6 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
7. Click the shopping cart icon (
applicable to your dealership:
) for a chosen brand. Wait a moment, and then proceed as
Single-brand dealer: Select To the shopping basket:
Dual-brand dealer: Click the additional brand shopping cart icon. Wait a moment, and then
select To the shopping basket:
(cont.)
Page 7 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. Click To the order:
DO NOT change the Quantity dropdown value ( 1 ).
9. Click the hardware key icon (
) for a brand product as illustrated:
(cont.)
Page 8 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10. Select Run:
11. If this prompt appears, select Run:
12. Select OK. The alpha-numeric hardware key is saved in Windows “clipboard” memory:
13. Right-click a Hardware key entry field for a Brand product and Paste the saved hardware key into the
field as illustrated:
(cont.)
Page 9 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
14. Right-click the computer name field and Paste the hardware key into the field as illustrated:
15. Dual-brand dealers: Repeat steps 13 & 14 to complete both entry fields for the additional brand:
(cont.)
Page 10 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
16. Minimize the Internet Explorer window with the current eShop session.
17. Restore the primary (desktop) AND backup (USB) device folder windows and Open each of their
prepared Hardware Key text documents:
18. Paste the hardware key (saved in clipboard memory) into both of the Hardware Key documents.
19. Save and Minimize the documents.
20. Minimize both device folder windows.
21. Restore the Internet Explorer window with the current eShop session.
22. Confirm that the hardware key appears in All Hardware key AND computer name entry fields as
illustrated, and then select To the order:
ATTENTION!
The hardware key entered in the computer name field is used by VWGoA to validate license
requests. The computer name field(s) MUST contain the hardware key! If data other than the
hardware key is entered in the computer name field, the license request will be denied!
(cont.)
Page 11 of 27
© 2015 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
23. In the Order information section, accept the general terms of business by placing a checkmark:
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VOS-15-08
Replacement Service Bulletin Number:
MFR Communication Date: 2015-12-17
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI
/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA
AutoAuth(The 689BT only provides a login and purchase portal, and users are required to register for an FCA
account and pay a membership fee in order to perform the relevant automotive diagnostics) - [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it. Note: FCA
AutoAuth is a third-party service, additional cost may be required. - 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions without annual fees for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA
AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball! - 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Cost-effective OBD2 scanner】 Thinkcar Thinkdiag2 is the most powerful wireless diagnostic tool for it's price! Equipped with multi-functions of Newly added CAN-FD protocol, BiDirectional control(Active Test), 15 Maintenance resets, All Systems diagnosis, Auto VIN, FCA
AutoAuth, Unlock the protected FCA
vehicle SGW module on Chrysler
, Dodge
, Jeep
, Alfa Romeo
, and Fiat
vehicles manufactured after 2019.120+ Car brands coverage, No IP limited, etc. Good for workshops & DIYers. Kindly send us VIN to check compatibility before purchase - 【OE-Level Full Systems Car Scanner with Added CAN FD Protocol】 Upgrade of Thinkdiag, Thinkdiag2 is a bluetooth diagnostic tool can diagnose Full System such as ECM, ABS, SRS, TCM, EPB, TPMS, SAS, A/C, BMS, etc. Thinkdiag2 can read/clear fault codes, read real-time data, read control module information,etc. As the only diagnostic scanner in this price range that supports the CAN-FD protocol, it suits for the latest GM(2019-) , saving $100 to buy a CAN FD adapter, reducing the risk of undetected errors to enhancing the user experience
- 【Bidirectional Test】This bidirectional scan tool Thinkdiag2 allows you to send commands from your smartphone directly to the vehicle's ECU for active testing, quickly locate problem areas, such as A/C clutch, windows, doors, sunroof, etc., reducing the diagnostic time and money. (Note: kindly send us VIN to check compatibility before order.)
- 【15+ Maintenance Functions】Thinkdiag2 OBDII code scanner is designed for individual car owners, DIYers, and small repair shops, which has a separate menu of 15 common special functions, such as Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, TPMS reset, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Maintenance functions that each car can do may be different
- 【120+ car brands & FCA
Autoauth+10 languages】Thinkcar thinkdiag2 helps you to troubleshoot the problems fast for 100 + US, European, Asian vehicle brands after 1996 that use the OBDII protocol. Only support 12V cars, including gasoline cars and diesel cars. Supporting Autoauth allows you to unlock the protected FCA
vehicle SGW module on Chrysler
, Dodge
, Jeep
, Alfa Romeo
, Fiat
vehicles, etc. (Note: Only provide AutoAuth login portal, and need purchase the registration number on the AutoAuth website by yourself.) Multilingual function allows workshop mechanics to avoid language barriers and use it around the world Without restriction
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




