NHTSA ID Number: 10122811
Manufacturer Communication Number: Quick Ref Spec B
TSB/Document Date: 2017-11-08
Summary
This document contains the quick reference specification book.
ignition away from the tire repair area. Inflate and deflate the tire at
least four times before breaking the bead from the rim. Completely
remove the tire from the rim before attempting
any repair.
• Some cars are equipped with a Supplemental Restraint System
(SRS) that automatically deploys airbags and pyrotechnic seat
belt tensioners in the event of a frontal or side impact. These
are explosive devices. Handled improperly or without adequate
safeguards, they can be accidentally activated and cause serious
injury.
• The ignition system produces high voltages that can be fatal.
Avoid contact with exposed terminals and use extreme care when
working on a car with the engine running or the ignition on.
6
Audi
A5/S5 Quick Reference Specification Book
•
November 2012
General
Information
• Place jack stands only at locations specified by manufacturer.
The vehicle lifting jack supplied with the vehicle is intended for tire
changes only. Use a heavy duty floor jack to lift the vehicle before
installing jack stands.
• Battery acid (electrolyte) can cause severe burns. Flush contact
area with water, seek medical attention.
• Aerosol cleaners and solvents may contain hazardous or deadly
vapors and are highly flammable. Use only in a well ventilated
area. Do not use on hot surfaces (such as engines or brakes).
• Do not remove coolant reservoir or radiator cap with the engine
hot. Burns and engine damage may occur.
CAUTIONS
• If you lack the skills, tools and equipment, or a suitable workshop
for any procedure described in this manual, we suggest you leave
such repairs to an authorized dealer or other
qualified shop.
• Before starting a job, make certain that you have all the necessary
tools and parts on hand. Read all the instructions thoroughly
and do not attempt shortcuts. Use tools appropriate to the work
and use only replacement parts meeting original specifications.
Makeshift tools, parts and procedures will not make good repairs.
• Use pneumatic and electric tools only to loosen threaded parts and
fasteners. Never use these tools to tighten fasteners, especially on
light alloy parts. Always use a torque wrench to tighten fasteners to
the tightening torque specification listed.
• Be mindful of the environment and ecology. Before you drain the
crankcase, find out the proper way to dispose of the oil. Do not
pour oil onto the ground, down a drain, or into a stream, pond or
lake. Dispose of in accordance with Federal, State and
Local laws.
• The control module for the Anti-lock Brake System (ABS) cannot
withstand temperatures from a paint-drying booth or a heat
lamp in excess of 95°C (203°F) and should not be subjected to
temperatures exceeding 85°C (185°F) for more than two hours.
• Before doing any electrical welding on cars equipped with ABS,
disconnect the battery negative (-) terminal (ground strap) and the
ABS control module connector.
• Always make sure the ignition is off before disconnecting battery.
(CAUTIONS cont’d on next page)
Audi
A5/S5 Quick Reference Specification Book
•
November 2012
7
CAUTIONS (cont’d)
• Label battery cables before disconnecting. On some models,
battery cables are not color coded.
• Disconnecting the battery may erase fault code(s) stored in control
module memory. Check for fault codes prior to disconnecting the
battery cables.
• If a normal or rapid charger is used to charge the battery,
disconnect the battery and remove it from the vehicle to avoid
damaging paint and upholstery.
• Do not quick-charge the battery (for boost starting) for longer than
one minute. Wait at least one minute before boosting the battery a
second time.
• Connect and disconnect a battery charger only with the battery
charger switched off.
• Sealed or “maintenance free” batteries should be slow-charged
only, at an amperage rate that is approximately 10% of the
battery’s ampere-hour (Ah) rating.
• Do not allow battery charging voltage to exceed 16.5 volts. If
the battery begins producing gas or boiling violently, reduce the
charging rate. Boosting a sulfated battery at a high charging rate
can cause an explosion.
8
Audi
A5/S5 Quick Reference Specification Book
•
November 2012
Vehicle Identification
Vehicle
Identification
Vehicle Identification Number (VIN) Location
The VIN (Æ) is on the left side of the vehicle in the area of
the windshield wiper mount. It is visible from the outside.
The vehicle data label is located in the rear spare wheel well.
Audi
A5/S5 Quick Reference Specification Book
•
November 2012
9
VIN Decoder
10 11 12 13 14 15 16 17
D 1 0 0 2 0 1 3
Calculate per
NHTSA Code
A= Ingolstadt
D= Bratislava
N= Neckarsulm
1= Gyor
** 7th VIN character is alphabetic for CDN, Mex. and
US 2010 and later vehicles. ROW model characters
are listed in parenthesis, (), for reference only.
***A4 allroad models are identified by WMI code of
‘WA1’. All other A4 models are identified by WMI
code of ‘WAU’.
Sequential
Product
Number
3
17
16
15
4 Series
12
13
14
15
16
17
Audi
A5/S5 Quick Reference Specification Book
F= 4 cyl 2.0L 211hp (CPMA) A4 q /
A5 Cpe/Cab q / Allroad / Q5
G= V6 3.0L 310hp (CGXB) A6 q (C7) / A7 q
G= V6 3.0L 272hp (CGXD) Q5
G= V6 3.0L 333hp (CGXC) S4 / S5 / S5 Cab
G= V6 3.0L 333hp (CJWB) Q7 S Line
G= V6 3.0L 280hp (CJWE) Q7
G= V6 3.0L 333hp (CTUB) A8 q
J= 4 cyl 2.0L TDI 140hp (CBEA) A3
M= V6 3.0L TDI 240hp (CNRB) Q7
N= V10 5.2L 525hp (BUJ) R8 / R8 Spyder
U= V8 4.2L 430hp (CNDA) R8 / R8 Spyder
1= 4 cyl 2.0L 265hp (CDMA) TTS Cpe/Rdstr
2= V8 4.0L 420hp (CEUA) A8 / A8L
2= V8 4.0L 420hp (CEUC) S6 / S7
2= V8 4.0L 520hp (CGTA) S8
3= 5 cyl 2.5L 360hp (CEPB) TT RS q
4= W12 6.3L 500hp (CEJA) A8L (D4)
6= V8 4.2L 450hp (CFS) RS5 Cpe/Cab
8= 4 cyl 2.0L 211hp + 40 kW (CHJA) Q5 Hybrid![]()
Sequential
Product
Number
A= Ingolstadt
D= Bratislava
N= Neckarsulm
1= Gyor
11 Assembly plant
FC (4G)** = A6 / S6 / A7 / S7
FD (4H) = A8
FE (4L) = Audi
Q7
FG (42) = R8
FH (8F) = A5 / S5
Cabriolet
FK (8J) =TT / TTS / TT RS
FL (8K)*** = A4 / S4
FM (8P) = A3
FP (8R) = Audi
Q5
FR (8T) = A5 / S5
9 Check digit
10 Model year
* PZEV = Partial Zero Emissions Vehicle
8
** 7th VIN character is alphabetic for CDN, Mex. and
US 2010 and later vehicles. ROW model characters
are listed in parenthesis, (), for reference only.
7 Model (7&8)
2013 Audi
VIN Decoder
6 Restraint system
Calculate per
NHTSA Code
***A4 allroad models are identified by WMI code of
‘WA1’. All other A4 models are identified by WMI
code of ‘WAU’.
5 Engine
Sequential
production number
(position 12 - 17)
K = 1989
L = 1990
M = 1991
N = 1992
P = 1993
R = 1994
S = 1995
T = 1996
V = 1997
W = 1998
X = 1999
Y = 2000
1 = 2001
2 = 2002
3 = 2003
4 = 2004
5 = 2005
6 = 2006
7 = 2007
8 = 2008
9 = 2009
A = 2010
B = 2011
C = 2012
D = 2013
TRU = Audi
- Hungary: P
WAU = Audi
- Germany
WA1 = Audi
- Europe: SU
WUA = quattro GmbH - G
Pass. Car
K = 1989
L = 1990
M = 1991
N = 1992
P = 1993
R = 1994
S = 1995
T = 1996
V = 1997
W = 1998
X = 1999
Y = 2000
1 = 2001
2 = 2002
3 = 2003
4 = 2004
5 = 2005
6 = 2006
7 = 2007
8 = 2008
9 = 2009
A = 2010
B = 2011
C = 2012
D = 2013
2
14
13
12
9 Check digit
10 Model year
8
7 Model (7&8)
1 Mfg. Make (1-3)
July 26, 2012 (Rev 2a)
Calculate per
NHTSA Code
6 Restraint system
5 Engine
4 Series
3
2
Sequential
production number
(position 12 - 17)
V= Allroad Prestige q
A5/S5 Prestige q
A5/S5 Cab Prestige q
Q7 TDI Prestige
R8 5.2 Spyder
W= A5 Prestige q S-Line
A5 Cb Prestige q S-Line
A7 Prem quattro
S7
Q5 3.0 Prestige
Q7 TDI Prestige S-Line
Y= A7 Premium+ q
2= A7 Prestige q
3= A5/S5 Man Prestige q
A7 Prestige q
S7 w/Innov. Pkg.
4= A5 Man Prest q S-Line
TT/TTS/TTRS Rdstr
Prestige quattro
9= Allroad Premium q
11 Assembly plant
2013 Audi
VIN Decoder
All = Active - Dr/Pass, AirBag - Dr/Pass, Advanced Front AirBag
A (A5 / S5 Cab, TT / TTS, R8) = Side AirBags Front, Knee Airbags Front
A (A5 / S5, RS5) = Side AirBags Front, Side Guard Air Curtain,
Knee Airbags Front
A (A3, A4 / S4, A6 / S6, A7 / S7, Q5, Q7) = Side AirBags Front, Side Guard
Air Curtain
A (A8 / S8) = Side AirBags Frt. & Rear, Side Guard Air Curtain, Knee AirBag
B (A3, A4 / S4, A6 / S6, A7 / S7, Q5, Q7) = Side AirBags Front & Rear,
Side Guard Air Curtain
1 Mfg. Make (1-3)
E= 4 cyl 2.0L 200hp (CBFA-PZEV*) A3
F= 4 cyl 2.0L 211hp (CAEB) A4 / A4 q / A5 q /
A5 Cab CVT / A6 CVT (C7)
F= 4 cyl 2.0L 211hp (CCTA) A3 q
F= 4 cyl 2.0L 211hp (CETA) TT Cpe q / TT
Rdstr q
F= 4 cyl 2.0L 211hp (CPMA) A4 q /
A5 Cpe/Cab q / Allroad / Q5
G= V6 3.0L 310hp (CGXB) A6 q (C7) / A7 q
G= V6 3.0L 272hp (CGXD) Q5
G= V6 3.0L 333hp (CGXC) S4 / S5 / S5 Cab
G= V6 3.0L 333hp (CJWB) Q7 S Line
G= V6 3.0L 280hp (CJWE) Q7
G= V6 3.0L 333hp (CTUB) A8 q
J= 4 cyl 2.0L TDI 140hp (CBEA) A3
M= V6 3.0L TDI 240hp (CNRB) Q7
N= V10 5.2L 525hp (BUJ) R8 / R8 Spyder
U= V8 4.2L 430hp (CNDA) R8 / R8 Spyder
1= 4 cyl 2.0L 265hp (CDMA) TTS Cpe/Rdstr
2= V8 4.0L 420hp (CEUA) A8 / A8L
2= V8 4.0L 420hp (CEUC) S6 / S7
2= V8 4.0L 520hp (CGTA) S8
3= 5 cyl 2.5L 360hp (CEPB) TT RS q
4= W12 6.3L 500hp (CEJA) A8L (D4)
6= V8 4.2L 450hp (CFS) RS5 Cpe/Cab
8= 4 cyl 2.0L 211hp + 40 kW (CHJA) Q5 Hybrid![]()
A6 Premium+
S8 Sedan
Q5 3.0 Premium+
Q7 3.0T Prest. S-Line
R8 4.2 Coupé - Man
E= A4 Premium+
R8 5.2 Coupé
F= A3 Avant-Man Prem
A4 Premium+ q
A6 Premium+ q
S6
G= A5 Manual Prem q
S5 Manual Prem+ q
A6 Premium+ q
R8 5.2 Coupé - Man
H= A4 Manual Prem+ q
A6 Prestige q
J= A4 Prestige
A5 Cab Premium+
A6 Prestige q
S6 w/Innov. Pkg.
All = Active - Dr/Pass, AirBag - Dr/Pass, Advanced Front AirBag
A (A5 / S5 Cab, TT / TTS, R8) = Side AirBags Front, Knee Airbags Front
A (A5 / S5, RS5) = Side AirBags Front, Side Guard Air Curtain,
Knee Airbags Front
A (A3, A4 / S4, A6 / S6, A7 / S7, Q5, Q7) = Side AirBags Front, Side Guard
Air Curtain
A (A8 / S8) = Side AirBags Frt. & Rear, Side Guard Air Curtain, Knee AirBag
B (A3, A4 / S4, A6 / S6, A7 / S7, Q5, Q7) = Side AirBags Front & Rear,
Side Guard Air Curtain
9
3
* PZEV = Partial Zero Emissions Vehicle
2013 Restraint System:
2013 Restraint System:
8
L
FC (4G)** = A6 / S6 / A7 / S7
FD (4H) = A8
FE (4L) = Audi
Q7
FG (42) = R8
FH (8F) = A5 / S5
Cabriolet
FK (8J) =TT / TTS / TT RS
FL (8K)*** = A4 / S4
FM (8P) = A3
FP (8R) = Audi
Q5
FR (8T) = A5 / S5
July 26, 2012 (Rev 2a)
10
7
F
Assembly plant
6
A
Model year
5
F
Check digit
4
B
Sequential
production number
(position 12 - 17)
2013
Restraint system
3
A
2
U
See back
1
W
Series
Mfg. Make (1-3)
K= A3 Avant Premium+
A4/S4 Prestige q
TT/TTS/TTRS Cpé
Prestige quattro
L= A5 Premium+ q
A5 Cab Premium+ q
Q5 2.0T Premium+
Q7 3.0T/TDI Prem+
M= A3 Avant Prem+ q
A4/S4 Man Prestige q
P= A3 Avant-Man Prem+
R= A5 Manual Prem+ q
A8 L Sedan
S= R8 4.2 Spyder
TT/TTS/TTRS Rdstr
Prem+ q
T= A5 Cab Prestige
R8 5.2 Spyder-Man
U= Allroad Premium+ q
A5 Cab Prest. S-Line
R8 4.2 Spyder-Man
V= Allroad Prestige q
A5/S5 Prestige q
A5/S5 Cab Prestige q
Q7 TDI Prestige
R8 5.2 Spyder
W= A5 Prestige q S-Line
A5 Cb Prestige q S-Line
A7 Prem quattro
S7
Q5 3.0 Prestige
Q7 TDI Prestige S-Line
Y= A7 Premium+ q
2= A7 Prestige q
3= A5/S5 Man Prestige q
A7 Prestige q
S7 w/Innov. Pkg.
4= A5 Man Prest q S-Line
TT/TTS/TTRS Rdstr
Prestige quattro
9= Allroad Premium q
TRU = Audi
- Hungary: Pass. Car
WAU = Audi
- Germany: Pass. Car
WA1 = Audi
- Europe: SUV / CUV
WUA = quattro GmbH - Germany:
Pass. Car
A= A4 Premium
A5 Cab Premium
A8 Sedan
R8 4.2 Coupé
B= A3 Avant Premium
A4 Premium q
S4 Premium+ q
TT/TTS/TTRS Cpé
Prem + quattro
C= A5 Premium q
A5 Cab Premium q
A6 Premium
S5 Premium+ q
S5 Cab Premium+ q
Q5 2.0T Premium
Hybrid![]()
Q7 3.0T/TDI Prem
RS5
D= A3 Avant Prem q
A4 Manual Prem q
S4 Manual Prem+
A6 Premium+
S8 Sedan
Q5 3.0 Premium+
Q7 3.0T Prest. S-Line
R8 4.2 Coupé - Man
E= A4 Premium+
R8 5.2 Coupé
F= A3 Avant-Man Prem
A4 Premium+ q
A6 Premium+ q
S6
G= A5 Manual Prem q
S5 Manual Prem+ q
A6 Premium+ q
R8 5.2 Coupé - Man
H= A4 Manual Prem+ q
A6 Prestige q
J= A4 Prestige
A5 Cab Premium+
A6 Prestige q
S6 w/Innov. Pkg.
Model (7&8)
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Quick Ref Spec B
Replacement Service Bulletin Number:
MFR Communication Date: 2012-11-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




