NHTSA ID Number: 10122312
Manufacturer Communication Number: AOS-14-12
TSB/Document Date: 2017-11-08
Summary
Supersedes AOS-14-06 due to due to revised license file download process. This document describes the complete installation and configuration processes of ODIS Service Installation DVD Version 2.1.0 on VAS diagnostic devices. Installations on Windows XP and Windows 7 operating systems are supported. Separate instructions for each installation option are covered throughout this document. Refer to Subsections 1.1, 1.2 and 1.3 for information on how to use these instructions.
8. No action needed. Click Next:
Page 6 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9. During Reinstallations a Setup C:\Program Files… (or similar) prompt appears. Click Yes:
10. No action needed. Click Next:
11. If additional user interface languages are desired or required, select them from the available
dropdown(s). Click Next:
Note:
Selecting additional languages increases the installation time.
Continued …8/
Page 7 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
Note:
Steps 12 and 13 configure the installed software to the diagnostic device model number, and
diagnostic interface (connection) method. If the model number & interface method is not selected
correctly, an “Invalid License File” error may appear when starting ODIS Service.
12. Carefully select the applicable diagnostic device model number from the dropdown menu, and
then click Next:
Select the applicable device model number from the dropdown menu
Pull the slider down to reveal the VAS 6160A selection.
13. Confirm that the applicable diagnostic interface (connection method) appears. (Method illustrated
is an example only. Your connection method may be different): Click Next:
Continued …9/
Page 8 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
14. On diagnostic laptops and tablets only, a Bluetooth interface alert window appears. Click Next:
15. Ensure Copy license to the license folder is checked, and then click Search…:
New Installations: Open the device folder on the desktop, and Open the “License” subfolder
with the saved license file, and then continue from Step 16.
Reinstallations: Navigate to the desktop or other location (USB flash drive etc.) containing the
saved license file, and then continue from Step 16:
16. Select / highlight the license (.dat) file and click Open (as illustrated).
Note:
DO NOT double-click the license file in
its saved location!
Continued …/10
Page 9 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
17. Ensure the license file directory path is copied to the installation window. Click Next:
18. No action needed (DO NOT uncheck virtual keyboard). Click Next:
19. No action needed. Click Next:
Continued …11/
Page 10 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
20. Wait while several different phases of the installation take place:
21. During New Installations, and Reinstallations after operating system recovery, the following prompt
appears. Place a checkmark ( ) to Always trust software from “Softing AG” and click Install:
22. Click Finish:
23. Close the CD/DVD directory Window.
The installation DVD must remain in the DVD drive for additional installation steps.
Application Software & License Installation steps completed.
Proceed to Section 3.2 – Page 12.
Page 11 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.2 – Post-Setup - Diagnostic Data Installation
The first time ODIS Service is started after installation, the Post-Setup Data installation must be
performed. This loads the brand-specific diagnostic data as per the installed license and selected
language(s).
1. From the Windows desktop, locate and click the DiagStarter.bat…. Icon:
2. Select Offboard Diagnostic Information System Service:
3. Wait while the program starts:
Click Select local directory…:
Continued …13/
Page 12 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. Expand [ ] the Computer and DVD RW Drive ( 🙂 directories and select / highlight the postsetup
folder as illustrated. Then click OK:
5. Confirm the postsetup directory path appears in the URL window, and then click the blue Forward
Arrow button:
The DVD drive letter illustrated is an example only! Your drive letter may be different!
Continued …14/
Page 13 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. The postsetup diagnostic data on disc is read and summarized. Click the blue Forward Arrow button
again:
7. Wait while the diagnostic data installation takes place:
Note:
The Progress indicator window may appear to stall or lock at times during the data installation. This
is normal. Please be patient!
When the postsetup data installation is complete, the ODIS Service application automatically shuts
down and restarts.
8. Cancel the System Updater prompt (if present) and close the Release Notes window.
9. Read the Warnings/notes information, scroll down and click OK.
Postsetup – Diagnostic Data Installation steps completed. Proceed to Section 4.0 – Page 15.
Page 14 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.0 – Post-Setup Configuration
Prior to placing diagnostic devices with new installations or reinstallations into service, a number of
configuration steps are required.
Configurations take place via the Admin operating mode. Settings can be changed at any time.
4.1 – Administration - General
The following subsections describe configurations using the Admin > General operating mode.
1. From the ODIS Service main screen, select Admin:
The available configuration function subcategories will be listed in the left-hand display menu.
4.1.1 – Brand Design
The brand logo and user interface colors are configured with the Brand design function.
1. Select Brand design and choose the desired brand theme from the dropdown menu. Click Save /
Yes:
Continued …16/
Page 15 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.1.2 – Language
The language displayed by the user interface is configured with the Language function.
If additional languages were selected during the software installation process, these languages are
selectable here.
1. Only if languages other than English (US) were added, select Language. Then choose the desired
language from the dropdown menu. Click Save / Yes:
4.1.3 – Update
The schedule for automatic updates is configured with the Update function.
1. Select Update: Review the available update schedule settings:
2. Configure the update cycle and time appropriate for your facility: Click Save / Yes
Note:
For additional information refer to Service Information – ODIS Service document title: Online Update
Guide
Page 16 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.1.4 – Keyboard
If desired, the virtual keyboard can be switched on or off for as appropriate for the diagnostic device.
1. Select Keyboard settings: Place or remove a checkmark next to Use the virtual keyboard. Click
Save / Yes:
4.1.5 – Dealer Data
If desired, configure the name of the dealership to appear in diagnostic logs.
1. Select Dealer data: Enter the name of the dealership in the Facility ID entry field:
Note:
DO NOT exceed 100 characters including spaces. Exceeding the character allowance may
cause GFF log transmissions to fail!
Click Save / Yes:
Continued …18/
Page 17 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.2 – Administration - Support
The following subsections describe configurations using the Admin > Support operating mode.
1. From the Admin operating mode main screen, select the Support tab: The Contact data section is
displayed first by default:
4.2.1 – Contact Data
Contact information is saved as necessary for Support Button requests.
1. Fill in all pertinent contact details. Ensure a valid email address is entered: Click Save / Yes:
Continued …19/
Page 18 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.2.2 – Email Outbox Server
The Email Outbox Server - Connection parameters that are specific to the dealership network must
be configured before using the Support Button.
1. Select E-mail outbox server: Enter or re-enter information as applicable and specific to your
dealership network. Click Save / Yes:
Note:
For additional information refer to Service Information – ODIS Service document title: ODIS Service
Email Outbox Configuration Guide
4.3 – Administration - Connections
The following subsection describes software configuration using the Admin > Connections operating
mode.
1. From the Admin operating mode main screen, select the Connections tab. The Brand settings data
section is displayed first by default:
Page 19 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.3.1 – Brand Settings Data
The connection to VWAG Group systems (to transmit GFF logs, etc.) is configured via Brand settings.
1. Change the Connection type in the dropdown menu(s) from CPN to Internet: Click Save / Yes:
4.3.2 – Mirror Server 2
Please confirm the Mirror Server 2 URL specified for the US /CDN market:
1. Select Mirror Server 2.
2. Confirm the Mirror Server URL appears as: https://mirrorserver2.vwhub.com/dav/
For New Installations:
- Continue with additional instructions in Subsection 4.4, Section 5.0 and Section 6.0 that follow.
- Install the Security Certificate: Refer to Service Information – ODIS Service document title: ODIS
Service Installation Phase 3 – Security Certificate Request and Installation Instructions
For Reinstallations: Refer to Section 6.0 - Page 22 prior to returning diagnostic device to service.
Page 20 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.4 – Delete VAS-PC Desktop Icon (where applicable)
If VAS-PC is currently installed on the diagnostic device, its icon must be removed from the Windows
desktop; otherwise the device may lock up. If VAS-PC is not currently installed or was previously removed,
skip to Section 5.0 below.
1. Minimize the ODIS Service application.
2. From the Windows desktop, right click the VAS-PC icon.
3. Select Delete from the dropdown. Click Yes.
ATTENTION!
• After removing the icon, do not start VAS-PC from the Windows > Start > Programs
listing.
•
Start ALL diagnostic sessions from the DiagStarter desktop icon, and then select either
ODIS Service or VAS-PC from the DiagStarter interface:
Please inform all Service Personnel accordingly!
Post-Setup Configuration steps completed. Proceed to Section 5.0 below.
5.0 – Post-Installation File Management & Backup
5.1 – General Information
If ODIS Service is uninstalled and subsequently reinstalled, the license file that was initially downloaded
from eShop to the diagnostic device desktop must be reinstalled. In these cases, the license file is simply
retrieved from device folder on the desktop of the diagnostic device (created during installation Phase 1)
during the reinstallation process.
However, if recovery of the Windows operating system is necessary, both the license and certificate files
are deleted from the desktop. In order to facilitate reinstallation of the license and certificate files after
recovery, the device folder created during installation Phase 1 must be backed-up on a USB flash
drive.
The backup USB flash drive is also used to download the security certificate from the eCRMS
application during installation Phase 3.
Continued …22/
Page 21 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
Note:
The following instructions are based on the device folder identification and record keeping method
suggested in the Phase 1 Instructions – Section 3.5.
If an alternate record-keeping method was chosen, backup the license and certificate files accordingly
and inform key service personnel.
5.2 – Backup Device Folder on USB Flash Drive
Prerequisite:
Diagnostic device license file downloaded from eShop to the device folder with “License”
subfolder as per the Phase 1 instructions, Section 3.5.
1. Obtain empty USB flash drive or existing USB flash drive with existing backups.
2. Insert USB flash drive into an available port on the diagnostic device.
3. From the Windows desktop, locate and select the device folder (named with the device ID).
4. Copy the device folder to the USB flash drive, making sure that the device folder name identifies the
device as being different from all other saved device folders (where applicable).
5. Retain the backup USB flash drive for the security certificate download process during installation
Phase 3.
Post-Installation Backup steps completed. Proceed to Section 6.0 – below.
6.0 – Online Updates
6.1 – General Information
The application software and diagnostic data installed with the latest “installation version” of ODIS Service
was current as of the date of the DVD release. However, revised and additional application and
diagnostic data may have been released via online updates after the DVD release date.
Dealerships are responsible for ensuring all diagnostic devices used on vehicles covered by new vehicle
warranty are updated with the latest application and diagnostic data. As a result, we recommend the
download and installation of applicable online updates prior to placing a new installation or reinstallation of
ODIS Service into service.
For details on online update setup and functions, refer to Service Information - ODIS Service document
title: Online Update Guide.
Page 22 of 22
© 2014 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AOS-14-12
Replacement Service Bulletin Number:
MFR Communication Date: 2014-03-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.