eSelf Study Program 690143

The 2015 Audi A3 Introduction
Sales and Aftersales

Audi of America, LLC
Service Training
Created in the U.S.A.
Created 12/2013
Course Number 690143
©2013 Audi of America, LLC
All rights reserved. Information contained in this manual is based on
the latest information available at the time of printing and is subject to
the copyright and other intellectual property rights of Audi of America,
LLC., its affiliated companies and its licensors. All rights are reserved
to make changes at any time without notice. No part of this document
may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording
or otherwise, nor may these materials be modified or reposted to other
sites without the prior expressed written permission of the publisher.
All requests for permission to copy and redistribute information should
be referred to Audi of America, LLC.
Always check Technical Bulletins and the latest electronic service repair
literature for information that may supersede any information included
in this booklet.

Revision 1: 12/2013
3

Contents
Introduction.................................................................................................. 6
The A3 sedan body........................................................................................ 7
Dimensions .................................................................................................................................................................. 7
Vehicle architecture (MQB) ......................................................................................................................................... 9
MQB and the Audi A3 ................................................................................................................................................. 9
Materials - ultra lightweight construction .............................................................................................................11
Body panels ...............................................................................................................................................................13
Joining techniques ....................................................................................................................................................13
Panorama tilt sunroof ..............................................................................................................................................16
Bumper system .........................................................................................................................................................18
Underbody .................................................................................................................................................................18

Passive safety.............................................................................................. 19
Components ..............................................................................................................................................................19
Vehicle Airbags ..........................................................................................................................................................19
Front safety belt tensioner ......................................................................................................................................21
Pelvic belt tensioner with locking buckle ...............................................................................................................22

Active Safety................................................................................................ 25
Audi pre sense ...........................................................................................................................................................25

Engines........................................................................................................ 31
1.8L and 2.0L TFSI engines ......................................................................................................................................31
Diesel engines ...........................................................................................................................................................33
Engine/transmission combinations ........................................................................................................................35

Power transmission..................................................................................... 37
Overview ....................................................................................................................................................................37
5th generation Haldex coupling ..............................................................................................................................39

Running gear............................................................................................... 41
Design concept ..........................................................................................................................................................41
Suspension variations ..............................................................................................................................................43
Tire Pressure Monitoring System ............................................................................................................................43
Wheels and tires .......................................................................................................................................................44

Electrical system......................................................................................... 45
Audi drive select ........................................................................................................................................................45

Climate control............................................................................................ 47
Infotainment............................................................................................... 49
Overview of versions .................................................................................................................................................49
Standard MIB ............................................................................................................................................................52
High spec MIB with navigation ................................................................................................................................53
Multimedia System Control Head ...........................................................................................................................54
MMI display ...............................................................................................................................................................55

Audi Connect............................................................................................... 56
Overview ....................................................................................................................................................................56
LTE ..............................................................................................................................................................................57
Antenna overview .....................................................................................................................................................59
LTE antennas .............................................................................................................................................................61
Sound systems ..........................................................................................................................................................63

Service......................................................................................................... 65
Knowledge Assessment.............................................................................. 66

4

This eSSP contains video links which you
can use to access interactive media.

This eSelf Study Program teaches a basic knowledge of the design and functions of new models,
new automotive components or technologies.
It is not a Repair Manual! All values given are intended as a guideline only.
For maintenance and repair work, always refer to the current technical literature.

Note

Reference
5

Introduction
The Audi A3 can look back on a 16-year success story. The
first generation of the series, which debuted in 1996 as a
three door, established an entirely new market segment
– the premium compact class. In 1999 the five-door hatchback and the sporty Audi S3 completed the family. In total,
around 990,000 vehicles were sold. The second generation,
launched in 2003, was even more successful, achieving
sales of approximately 1.8 million vehicles.

The lightweight body and newly developed engines have
had major consequential effects throughout the vehicle,
reducing the weight of many suspension, exhaust and
interior components. At launch, the vehicle will be offered
with two recently refined engines from the EA888 family.
The Modular Infotainment Platform (MIB) makes its debut
in the A3 sedan. It represents a big step forward in mobile
communication electronics.

With the newest generation of the A3, the Group has set
itself the goal of improving the fuel economy of its internal
combustion engines, extending its product range to include
alternative drive systems such as natural gas engines and
electric motors, and equipping the vehicles with the latest
technical innovations. The basis for implementing these
objectives is the MQB or “modular transverse platform”, a
standardized architecture in which various vehicle components can be combined in any configuration on modular
principles. This broadens the diversity of the model range,
resulting in more efficient production, engines and combinations of materials.

The A3 also sets new standards in the premium compact
class when it comes to driver assistance systems. One of
the most important of these is Audi pre sense. In the event
of an impending collision, the system warns the driver in
progressive stages and, if necessary, can initiate partial
braking in order to reduce the car’s speed at impact.

The 2015 A3 sedan represents the cumulative technological expertise of Audi in a compact format. In its lightweight
body, its interior architecture and its user interfaces, the A3
sedan will once again set standards in its class. Its engines
impress with their efficiency and power, and the range of
driver assistance systems and infotainment solutions is
unparalleled in the premium compact class.

The Audi A3 and S3 sedans are assembled in Györ, Hungary.
The site in northwestern Hungary is one of the largest
automobile factories in the world. This is where Audi has
assembled the TT coupe, and in the near future will assemble the A3 cabriolet. It is an ultra modern facility with the
capability of complete production work—from stamping to
final assembly.

625_001

6

The A3 sedan body

55.7 in (1416 mm)

Dimensions

37.0 in (942 mm)

61.2 in (1555 mm)

60.0 in (1526 mm)

70.7 in (1796 mm)

77.1 in (1960 mm)
625_037

34.2 in (869 mm)

103.8 in (2637 mm)

m)
24
m
3 (9

27.0 in (688 mm)

36.

39.

6 in

(10
0

6m

m)

625_036

37.4 in (950 mm)

175.4 in (4456 mm)

625_038

7

39.3 in (1000 mm)

52.9 in (1345 mm)

56.0 in (1423 mm)

54.8 in (1392 mm)

57.2 in (1453 mm)

37.4 in (951 mm)

625_039

Dimensions and weight
Length

175.4 in (4456 mm)

Front elbow room

57.2 in (1453 mm)

Width

70.7 in (1796 mm)

Rear elbow room

56.0 in (1423 mm)

Height

55.7 in (1416 mm)

Front head room

39.6 in (1006 mm)

Front track width

61.2 in (1555 mm)

Rear head room

36.3 (924 mm)

Rear track width

60.0 in (1526 mm)

Load pass-through width

39.3 in (1000 mm)

Wheelbase

103.8 in (2637 mm)

Load lift-over height

27.0 in (688 mm)

Luggage compartment volume

15.0/31 1) cu ft
(425/880 1) l)

Curb weight (approximate)

2899.0 lb (1325 kg)

Permissible total vehicle weight

4111.6 (1865 kg)

1)

Rear seat folded

A3 sedan compared to A4 sedan
8

Vehicle architecture (MQB)
The Audi A3 sedan builds on the body structure of the
three-door A3. It is part of the MQB strategy used by the
Volkswagen Group of which Audi is a part. MQB stands for
modular transverse baukasten or modular transverse
platform.

vehicle size or brand. MQB uses a core group of components
across a wide variety of platforms — for example, sharing a
common engine-mounting for all drivetrains. The concept
allows diverse models, including those from the company‘s
various brands, to be manufactured at the same plant,
further saving cost.

It is not so much a platform per-se, but rather a system for
introducing commonality across disparate platforms that
share the same engine orientation — regardless of model,
Wheelbase + 1.37 in (35 mm)

Variable

Uniform

MQB and the Audi A3
The underbody of the A3 series consists of 3 modules:

•
•
•

the front section
Floor pan, center section
Trunk floor

Variable

Longer overhang +
6.4 in (165 mm)

625_118

Compared to the three-door A3, the A3 sedan needed a
longer central floor pan and a longer rear floor pan but are
based on the same basic design and manufacturing processes.

625_119
9

Notes

10

Materials - ultra lightweight
construction
Body developers at Audi have broad-based engineering
expertise spanning all relevant materials. This know-how is
not limited to just a specific material, rather the motto is:
“The right material at the right place for optimal function.”
The multi-material body of the Audi A3 lives up to this
maxim.
All the ultra lightweight design principles that have made
all A3 models lighter than their predecessors have been
applied to the design of the new A3 sedan.

Ultra high-strength hot-formed steel
components
Ultra high-strength hot-formed steel components provide
approximately a 24% share of the A3 sedan body structure.
Before the components are stamped, special steel is heated
to nearly 1832 °F (1000 °C) in a continuous oven. After
heating, it is immediately placed in a water cooled press
tool. The steel is quickly cooled to approximately 392 °F
(200 °C) before it is stamped. The rapid cooling of the
steel changes its iron/carbon structure and creates a steel
with high tensile strength which in turn allows thinner wall
thicknesses for the particular components. Steels created
in this manner require special care and procedures during
repairs.
11

At the same time, the A3 sedan meets the highest
demands in the area of vehicle safety. The basis for this is
that the materials used are only those that meet the high
quality standards of Audi.

High-strength steel 30%

Ultra high-strength notformed steel 24 %

Soft steel 28,5 %
Modern high-strength steel 17 %

Aluminum 0,5 %
625_110

625_109

A3 sedan B pillar

Ultra high-strength

The B-pillar with striker plate is partially tempered during
the forming process. The component assembly is very hard
at the top end and softer below a narrow transition zone.
This enables side impact forces to be absorbed effectively.

High-strength
Ultra high-strength

625_111
12

Body panels
Some inner and outer body panels such as the fenders,
doors, rear bumper, cross member, and the rear trunk lid
are all made from light steel.
The following components are made from aluminum:

•
•
•

the front bumper cross member
the hood
the rear hat shelf

The use of both light steel and aluminum further helps
reduce the weight of the body.

Joining techniques
Both old and new body component joining techniques are in
use. In addition to the 4803 classic resistance spot welds
used during assembly of the body, the following joining
methods are also used:

•
•
•
•

MAG welding
Laser welding
Clinching (attachments only)
Solid punch riveting

In each A3 sedan there are over 196 ft (60 m) of glued
joints.
The joint between the body side wall and roof is laser
welded and then smoothed by brushes to produce a nearly
invisible zero joint.
The water drainage paths in the area of the rear trunk lid
are joined by Plasmatron welding.
To save more weight, doors and window frames are pressed
in one piece. The inner and outer doors are welded by the
ultra-modern remote laser technique.

13

625_112

Key:
Ultra high-strength hot-formed steel
Modern high-strength steel
High-strength steel
Soft steel
Sheet aluminum
Aluminum profile

14

Ultra high strength hot-formed steel components are installed in the following areas
Forming the backbone of the occupant cell is what are
known as form-hardened steels. An extreme temperature
change during forming process gives these steels extremely
high strength; the parts can be designed with relatively
thin walls, making them lightweight.

Form-hardened steels represent a 26 percent share of body
materials. They are used in the transition from the front of
the vehicle to the occupant cell, in the A-pillars, B-pillars,
roof arch, center tunnel, side sills and floor panels. Altogether, they lower the car’s weight yet provide excellent
strength.

10

9
4

8

11

5
6
1

7

2

3

625_114

1

Long members (2 left / 2 right)

7

Rear seat crossmember

2

Upper foot room crossmember

8

Rear transverse crossmember

3

Lower foot room crossmember

9

Left and right upper A pillars

4

Left and right inner A pillars

10

Left and right rear long members

5

Left and right inner rocker panels

11

Left and right inner B pillars

6

Center tunnel

15

Panorama tilt sunroof
The 2015 A3 sedan features an optional panorama slide/
tilt sunroof.

The roof opening is larger than that of an internally guided
sunroof and creates a particularly airy and spacious interior
feel for the occupants.

609_069b

Thermal insulation
The glass roof panel is tinted and provides additional
thermal insulation. Thermal insulation is provided by the
following reflective components:

•
•
•

The panorama slide/tilt sunroof module meets the statutory requirements for anti-pinch protection.

99 % UV radiation reflection
92 % heat radiation reflection
90 % light radiation reflection

609_083

16

Roof installation
The panorama slide/tilt sunroof is glued into the roof
opening and thus is a major factor contributing to body
rigidity.

Transverse bonded seam

609_122b

609_070

Bonded ring seam

Component overview

Glass panel

Slide/tilt mechanism

Wind deflector

Front trim
(plastic)

Cover for
sliding sunroof motor/