2016

A7/S7/A7 TDI/RS 7
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by an Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units
during the SVM check vehicle configuration
 Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information

Open Campaigns/Updates

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Set spare tire pressure (See separate “2016 Normal Load
Condition Tire Pressure Table” posted on ServiceNet)

Transport Mode Deactivation, DTC Check, Set Service
Reminder

 Verify operation of Hands-free trunk release

 Deactivate air suspension loading mode*
 Deactivate vehicle transport mode*

 Verify operation of luggage cover
 Verify tool kit is installed securely in luggage compartment

 Perform any open campaigns *

Interior

 Set adaption channel to enable CD Ripping (if equipped with
NAV)*

 Check heated steering wheel operation (if equipped)

 Set service reminder*
Under the Hood Inspection

 Verify operation heated/ventilated & massaging seats (if
equipped)*
 Verify operation of all seat belts and latches

 Check all fluid levels and top off if necessary

 Verify operation of front Passenger Occupant Detection
System

 Check battery clamps for proper torque*

 Verify proper operation of climate control*

 Check engine oil level*

 Verify rear climate control operation (if equipped)*

 Perform a battery test*
Switches / Outlets and Windows
Exterior

 Check horn operation

 Check all doors for proper power closing (if equipped)*

 Check operation of window, lock, and seat controls*

 Check all key buttons and features*

 Check panoramic sunroof operation*

 Verify power rear lid/tailgate is operational

 Check rear view mirror operation*

Lighting and Windshield

 Inspect mirrors for proper operation*

 Test exterior lighting functions

 Inspect operation of all power outlets*

 Test front washers (and headlight washers if equipped)*

 Verify operation of all interior lights*

Trunk Inspection

Audi connect (USA ONLY) (if equipped)

 Install wheel bolt cover removal tool from PDI kit into trunk
lid toolkit

 Check Wi-Fi hotspot functionality*

Effective 2-25-2015-US
Version 1.1

PRE-DELIVERY INSPECTION (PDI) | 1

2016

A7/S7/A7 TDI/RS 7
Audi Pre-Delivery Inspection
Audi connect (USA ONLY) (if equipped) (continued)

Driver Assistance

 Connect the dealer demo SIM card to verify system connects
to mobile network*

 Activate NAV and follow directions back to dealership (if
equipped)

 Enable Google Earth (if equipped)*

 Verify all vehicle Head-up Display functionality (if
equipped)*

 Turn on the wireless network*

 Verify Audi active lane assist functionality (if equipped)

 Verify Audi connect Information Packet is present*

 Verify Audi side assist functionality (if equipped)
Media / Radio / SAT
 Insert SD card and test function of all slots

 Verify cruise control/ACC with Stop & Go functionality (if
equipped)

 Program the presets to local stations

 Verify operation of Audi parking system (if equipped)*

 Verify HD Radio is turned “off”*

 Verify operation of night vision camera (if equipped)

 Verify operation of both USB ports

Driving Performance

 Verify operation of CD/DVD player (if equipped)

 Check adaptive air suspension in all positions (if equipped)

Settings

 Check for squeaks, rattles and wind noise

 Load Onboard Video Tutorials*

 Check steering/tire alignment

 Set “Music volume while parking” to 6 lines*

 Test drive vehicle applying brakes several times*

 Set dealership location in navigation (if equipped)*

 Verify engine performance and acceleration*

 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*

 Verify engine Start-Stop System functionality (if equipped)*

 Verify and set language and Measurement Units*

 Verify rear spoiler functionality

 Verify Voice Activation is operating (if equipped)*

 Verify transmission operation, including shift paddles (if
equipped)

 Verify quality of radio reception in AM/FM/SiriusXM bands

On-Hoist Inspection
 Check steering, boots, brake system, hoses, tires and wheels
for damage

Post-Road Test Inspection

 Check underside of vehicle for fluid leaks and loose components

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Inspect wheel bolts for proper torque*
 Install wheel bolt covers*

 Install showroom charger to ensure battery remains
charged at all times

 Remove hoist access point trim covers (if equipped)*

 Interrogate fault memory and print Diagnostic Log

 Remove transport suspension blocks (follow ELSA instruction)

 Record final mileage and sign checklist

 Apply Inventory Maintenance Sticker

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle (See separate “2016 Normal Load Condition Tire Pressure Table” posted on ServiceNet)*

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 2-25-2015-US
Version 1.1

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2