NHTSA ID Number: 10120637
Manufacturer Communication Number: AOS-16-05
TSB/Document Date: 2017-10-25
Summary
This document describes the preparation, license and security certificate processes required prior to installing ODIS Service diagnostic software on eligible diagnostic laptop and tablet devices. These instructions apply to the preparation of brand new diagnostic laptop and tablet devices. Supersedes AOS-15-11 due to revised information.
24. Scroll down if necessary and enter the email address to which the license approval notification
emails will be sent. Then select Check the order:
25. Confirm all information entered, and then select Order to submit the license request:
(cont.)
Page 12 of 27
© 2016 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
26. Click the Order (HTML) link to open a request summary:
27. Locate and note the Order Number from the HTML document.
28. Restore the primary and backup Hardware Key documents previously saved and minimized.
29. Record the order number and request date in both of the Hardware Key documents for future
reference. Optional: Select, Copy and Paste the Order HTML document into the text document.
ATTENTION!
Avoid confusion when preparing more than one new device by always matching device
IDs with the order numbers. Accurate record-keeping now prevents problems later!
30. Save and Close both Hardware Key documents, and Close both device folders.
31. Close the Order HTML document.
32. From the eShop Navigation menu, select To the dealer portal:
33. Logout of the Dealer portal, and then Close Internet Explorer. Important: Dealer Portal Logout and
Close IE steps are mandatory!
34. If desired, safely remove the backup USB flash drive while waiting for license request approval.
License Request steps completed. Proceed to Section 3.2 – Page 14
Page 13 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.2 – Download & Store License
Two emails are sent to the email address entered in the license request:
The first email confirms that the license request was received and staged for review.
The second email notifies that the license request is approved.
Sample:
If a request is submitted for a non-authorized device, or if the hardware key was missing from the request,
license request denials are sent via the second email.
ATTENTION!
WAIT until the license approval notification email is received before proceeding
with the following procedure.
1. Note the order number and date from the approval notification email.
2. Retrieve the diagnostic device on which the license request was made. (If the backup USB flash drive
was removed, reinsert it now and open its directory.)
3. From the Windows desktop, Open the device folder.
4. Open the Hardware Key document created earlier:
5. Confirm that the order number recorded in the Hardware Key document is the same as that in the
license approval notification email, and then Close the document.
6. Launch Internet Explorer
7. Logon to vwhub.
8. From the main (top) menu, select the My Hub or Service tab.
9. From the left margin menu, select the link to ODIS – eShop
(cont.)
Page 14 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10. From the eShop Navigation menu, select License:
11. Confirm that the Creation date of the available license matches that in the approval notification
email:
12. Click the File download arrow:
US-CDNXXXXX
(cont.)
Page 15 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
13. Click the dropdown selection arrow:
14. Select Save As:
15. Navigate to the device folder on the Windows desktop.
16. Open the License subfolder:
17. Click Save:
(cont.)
Page 16 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
18. Repeat Steps 11 through 16 to save a backup copy of the file on the backup USB flash drive.
19. From the eShop Navigation menu, select To the dealer portal:
20. From the Dealer portal, select Logout and then Close Internet Explorer.
21. Safely remove the backup USB flash drive and retain for the security certificate process.
Notes:
• Please ensure that the device’s license.dat file was successfully saved in both the primary
and backup License subfolders. If the license file was not successfully saved, repeat Steps 6
through 18 as applicable.
• Do not proceed to Installation Phase 2 if the license is not downloaded and stored as
specified above. The stored license file must be accessed and installed during the
ODIS Service software installation process.
• NEVER double-click the license file (to open it) in its stored locations!
All License Process steps completed. Proceed to Section 4.0 – Page 18
Page 17 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.0 – Security Certificate Process
4.1 – Request Security Certificate (eCRMS)
Prerequisites
Person performing the request has access permission to the eCRMS application on vwhub.
(Permission must be granted by the dealership Systems Administrator.)
Backup USB flash drive with device folder and hardware key document on hand.
Network desktop PC or laptop connected to a printer available.
Fax machine available.
Optional: Scanner and network desktop PC or laptop with email program available.
ATTENTION!
DO NOT proceed with the certificate request if the above prerequisites are not met!
1. Insert the backup USB flash drive into available port on a network PC or laptop connected to a
printer.
2. Open the USB flash drive directory.
3. Start Internet Explorer.
4. Logon to accessaudi
5. From the Related Links menu, select Service
6. From the submenu, select the link to ODIS Certificate Request Mgmt. System (eCRMS).
7. Complete the eCRMS logon.
8. Select Create Certificate:
(cont.)
Page 18 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9. Select Yes:
The eCRMS request interface appears.
Information must be entered in all request interface fields marked with an asterisk ( * )
10. Enter all applicable information required in the Dealer/Site Information and Contact
Information sections.
11. Enter the diagnostic device information in the Device Information section as follows:
a. Minimize the eCRMS browser session and navigate to the backup USB flash drive directory
b. Open the applicable device folder and Hardware Key document.
c. Select and Copy the first 32 characters (only) of the hardware key. Example:
The characters are saved in Windows “clipboard” memory.
(cont.)
Page 19 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
d. Restore the eCRMS browser session.
e. In the *Device Type field, Select the device type from the dropdown menu.
f.
In the *Hardware ID field, use Windows keystroke combination Ctrl + V to Paste the 32character Hardware Key into the field. (Manual entry is not possible.)
g. In the *Device Name field, Enter the corresponding, assigned device ID.
When all required information fields ( * ) are filled in, click Submit:
40XXXXX
40XXXXX
John Smith Autohaus
xxx-xxx-xxxx
xxxxxxxxxxxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxx
John Smith
xxx-xxx-xxxx
xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
VASXXXX
e
g
f
Note:
The device ID must be accurately matched with its hardware key in the preceding step. The
device ID and hardware key entered above will appear next to the certificate file staged in
eCRMS during the certificate download steps that follow.
(cont.)
Page 20 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
12. Note the email address and/or fax number from the Important dialog message. Click OK:
13. Select Print:
14. In the printed copy, fill in the Service Manager’s name.
15. Have the Service Manger sign and date the printed copy.
16. Fax the printed form to (248) 754-6302. Optional: scan form and attach to email to:
information.security@vw.com
17. Safely remove the backup USB flash drive and retain for the certificate download steps that follow.
When the certificate request is approved:
•
The certificate is created and staged for download in eCRMS.
•
An email is sent, instructing to logon to eCRMS and download the certificate.
Note:
Certificate request confirmation emails can be expected within one working day from the time of
submission.
Certificate Request steps completed. Proceed to Section 4.2 – Page 22
Page 21 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.2 – Download & Store Security Certificate
Prerequisites:
Certificate request approval notification email received.
Backup USB flash drive with device folder on hand.
1. Insert the backup USB flash drive with device folder into available port on a network PC or laptop.
(The diagnostic device on which ODIS Service is to be installed can also be used here.)
2. Logon to accessaudi > Service > ODIS Certificate Request Mgmt. System (eCRMS).
3. Complete the eCRMS logon.
4. Select View Certificate:
5. Enter your Dealer Number:
6. Select Status: Active:
7. Select Search:
A screen with active certificate(s) for the dealership appears:
1. Note the Device ID associated with a posted certificate and place a checkmark () next to the
certificate number:
2. Click Download Certificate: Note the Download Instructions dialog, and click OK:
(cont.)
Page 22 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3. Navigate to the applicable device folder on the backup USB flash drive, and Save the certificate in
the Certificate subfolder:
Ensure the certificate file appears as being saved in the applicable Certificate subfolder.
4. Select Close eCRMS:
5. Safely remove the backup USB flash drive and retain for the certificate importation steps that follow.
Certificate Download steps completed. Proceed to Section 4.3 – Page 24
Page 23 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.3 – Import Security Certificate to Windows
ODIS Service application data is downloaded from a VWAG Group Services web-server. To enable this,
the security certificate must be copied from the backup USB flash drive to the device folder that was
prepared on the Windows desktop, and then imported to Windows.
Certificate importation to Windows authorizes Internet Explorer to access the VWAG web-server.
The diagnostic device’s hardware key must be entered as a password during the certificate importation
process.
Prerequisites
Security certificate saved to backup USB flash drive.
Applicable diagnostic device plugged in to power adapter and booted to Windows desktop.
4.3.1 – Preparation
1. Open the previously-prepared device folder on the diagnostic devices’ Windows desktop.
2. Insert the backup USB flash drive in an available port on the diagnostic device, and Open the
applicable devices’ device folder and Certificate subfolder:
3. Copy the certificate (.pfx) file from the backup USB flash drive to the corresponding device folder
& Certificate subfolder on the Windows desktop:
4. Close and safely remove the backup USB flash drive. Store the USB flash drive in a safe location in
case its backup files are needed.
Page 24 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4.3.2 - Importation
1. From the device folder on the Windows desktop, Open the Certificate subfolder and double-click
the certificate (.pfx) file:
2. Select Next:
3. Select Next:
(cont.)
Page 25 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
4. From the device folder on the Windows desktop, Open the Hardware Key document:
5. Select and Copy the first 32 characters (only) of the hardware key. Example:
The characters are saved in Windows “clipboard” memory.
6. Paste the 32-characters copied above into the Password: entry field, and then select Next:
................................
7. No action needed. Select Next:
(cont.)
Page 26 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. Select Finish:
9. Select Yes:
10. Click OK:
All Preparation, License & Security Process steps completed.
Proceed with Installation Phase 2 – Software Installation & Configuration Instructions
Page 27 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AOS-16-05
Replacement Service Bulletin Number:
MFR Communication Date: 2016-03-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- 【2026 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2026 CRP123I V3.0 car diagnostic scanner has a new processor✅Android 8.1, 2+64GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery✅FCA SGW, New Protocol CANFD & DoIP✅Work with BST360 Battery Tester & i-TPMS Tire Pressure Detector Tool（Purchase Separately）✅2.4&5GHz dual WiFi,One-touch Lifetime Free update for 100+ Global brands(1996-2026),help you access,diagnose and fix more vehicles faster,upgrade of CRP123I V2.0.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2026 New Ver. scan tool CRP123I V3.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, DPF Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V3.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via Wifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Lifetime Free Update + FCA SGW +CAN FD & DoIP】This scan tool features One-click wifi update and fre e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V3.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW);New Protocol CANFD & DoIP cover more newer car and boost 4X faster data transfer（need extra adapters).
- 【Cover 10000+ Models & 100+ Car Brands】CRP123I V3.0 Elite code reader for cars and trucks is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2026 and 90+ car makes worldwide. Support almost all 12V OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls reach us via Q&A/message before purchase.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.