NHTSA ID Number: 10120637
Manufacturer Communication Number: AOS-16-05
TSB/Document Date: 2017-10-25
Summary
This document describes the preparation, license and security certificate processes required prior to installing ODIS Service diagnostic software on eligible diagnostic laptop and tablet devices. These instructions apply to the preparation of brand new diagnostic laptop and tablet devices. Supersedes AOS-15-11 due to revised information.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: AOS-16-05
Subject: ODIS Service Installation Phase 1 - Preparation &
License Request Instructions (eShop)
Date: Mar. 21, 2016
Supersedes AOS-15-11 due to revised information.
Table of Contents
Page
Section
1.0
Introduction
2
1.1
General Information - MUST READ!
2
1.2
Preparation Overview
2
1.3
License & Certificate Processes Overview- MUST READ!
2
2.0
Preparation
3
2.1
Diagnostic Device Hardware & Network Prerequisites
3
2.2
Supplementary Materials
3
2.3
Assign Device ID
4
2.4
Prepare License & Certificate Storage Folders
4
3.0
License Process
5
3.1
Request License (eShop)
5
3.2
Download & Store License
14
4.0
Security Certificate Process - MUST READ!
4.1
Request Security Certificate (eCRMS)
4.2
Download & Store Security Certificate
4.3
18
18
22
®
Import Security Certificate to Windows
24
Notes:
• Please read these instructions carefully and in their entirety before performing any
procedures. If you do not understand these instructions, arrange to have a qualified person
perform these procedures.
• Heed all prerequisite requirements and notes, and follow all instruction steps in the Section
order given.
• Discard all printed copies of this document after use. Revised versions may be issued at any
time. Always check ServiceNet for the latest version.
Page 1 of 27
© 2016 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.0 – Introduction
1.1 – General Information
This document describes the preparation, license and security certificate processes required prior to
installing ODIS Service diagnostic software on eligible diagnostic laptop and tablet devices. These
instructions apply to the preparation of brand new diagnostic laptop and tablet devices, i.e.: devices
where ODIS Service was NOT previously installed.
Instructions for the initial installation of ODIS Service are broken down into two separately-titled
instruction document “Phases”: Installation Phase 1 and Installation Phase 2. These Phase 1
instructions must be completed before proceeding with the Phase 2 instructions (also posted on
ServiceNet).
Checkboxes are provided throughout this document to note fulfilled prerequisites and completed sections.
1.2 – Preparation Overview
The preparation guidelines:
• Ensure diagnostic device eligibility for ODIS Service software installation and use.
• Physically identify individual diagnostic devices in workshop service.
• Suggest methods to store and manage the license and security certificate files after download.
1.3 – License & Certificate Process Overview
1.3.1 – License Request & Download
• An ODIS Service software license file must be requested, downloaded and stored. The file is then
retrieved and installed during the ODIS Service software installation process (Phase 2).
• License requests are submitted online via the eShop application administered by VWAG.
• License requests must be made using the diagnostic device on which ODIS Service will be
installed. This is necessary to associate the license with the unique hardware key of the device.
• Regardless if license requests are made for devices at a single-brand dealer or a dual-brand
dealer, only one license file is needed per device. The license file determines the brand-specific
diagnostic data that is installed and updated.
• Each license request is reviewed by VWGoA and approved or denied as applicable.
• When approved, a license approval notification email is sent to the email address entered in
the request. Please ensure that a valid email address is entered in the request. VWGoA and
VWAG are not responsible for misdirected license approval notification emails.
• License requests submitted before 1:00 PM EST are typically approved within three hours.
License requests submitted after 1:00 PM EST may take up to one business day for approval.
• License files must be downloaded from eShop directly to the diagnostic device, backed-up,
and then installed during the ODIS Service software installation process (Phase 2).
Page 2 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
1.3.2 – Security Certificate Request, Download & Import
• A security certificate file must be requested, downloaded and stored. The file is then retrieved and
imported to a Windows® certificate store before the ODIS Service software installation process.
• The certificate enables the authorized download, installation and update of ODIS Service software
from a Volkswagen AG (VWAG) web-server, and allows diagnostic functions that require secure
online communication with various VWAG Group services.
• Certificate requests are submitted online via the eCRMS application administered by VWGoA. A
request form must be printed, signed and faxed to VWGoA.
• Certificate requests include entering the diagnostic devices’ unique hardware key (determined
during license request process) in the request form. This is necessary to associate the certificate
with the dealership and the devices’ hardware key.
• Regardless if certificate requests are made for devices at a single-brand dealer or a dual-brand
dealer, only one security certificate is needed per device.
• Each certificate request is reviewed by VWGoA and approved or denied as applicable.
• When approved, a certificate approval notification email is sent to the email address entered
in the request. Please ensure that a valid email address is entered in the request. VWGoA is not
responsible for misdirected certificate approval notification emails.
• Certificate requests are typically approved within one business day.
• Certificate files must be downloaded from eCRMS directly to a backup USB flash drive,
copied to the diagnostic device, and then imported to Windows.
2.0 – Preparation
2.1 – Diagnostic Device Hardware & Network Prerequisites
Windows 7
Device must have functional USB ports.
Network connection via Ethernet cable or WLAN enabled.
Antivirus software temporarily disabled (where applicable).
Device connected to A/C power adapter and booted to Windows desktop.
Diagnostic tablets: Connect USB mouse and keyboard for easier input.
2.2 – Supplementary Materials
Error-free license and certificate process management relies on identifying all diagnostic devices in
service and safely storing these files until they are needed. To enable this, obtain the following:
Self-adhesive labels. (Optional: permanent marker.)
USB Flash Drive (for license & certificate file backups).
Page 3 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.3 – Assign Device ID
We suggest assigning a device ID using the following method:
1. Apply a self-adhesive label to the diagnostic device in a clean, conspicuous area.
2. Mark the new devices’ model designation along with a numeric descriptor on the label (or directly to
the device with permanent marker) as per the following suggestions:
•
6150C_1, 6160A_1 (The underscore 1 indicates only one of each device is in service).
•
6150C_1, 6150C_2, 6150C_3 etc. (The underscore numbers indicate more than one of the
same device are in service).
2.4 – Prepare License & Certificate Storage Folders
We suggest the following method to prepare primary and backup storage folders. These serve to
organize and store the license and certificate files and record the device hardware key for future use.
1. Create the primary storage folder on the Windows desktop of the diagnostic device: Right-click >
New > Folder
2. Name this folder with the device ID assigned as per Section 2.3. This folder will be referenced
throughout the remaining instructions as the “device folder”.
3. Open the device folder and create two subfolders: Name the subfolders “License” and
“Certificate” respectively.
4. Create a Text document in the device folder: Right-click > New > Text document. Save the empty
text document as: “Hardware Key”.
Example: Illustrated below is a device folder created for a device identified as “VAS 6150C_1”:
5. Insert the backup USB flash drive into an available port on the diagnostic device.
6. Select and Copy the primary device folder to the backup USB flash drive directory.
7. Leave the backup USB flash drive connected with its directory accessible.
8. Minimize the primary and backup device folder windows.
Preparation steps completed. Proceed to Section 3.0 – Page 5
Page 4 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3.0 – License Process
3.1 – Request License (eShop)
Prerequisites:
Person performing the request has access permission to the eShop application on vwhub.
(Permission must be granted by the dealership Systems Administrator.)
All Section 2.0 - Preparation steps completed!
Backup USB flash drive with device folder on hand.
The diagnostic device on which ODIS Service will be installed must be used to make the
license request.
1. Launch Internet Explorer
2. Logon to accessaudi
3. From the Related Links menu, select Service
4. From the submenu, select the link to ODIS – eShop
Notes:
• First time users of eShop are prompted to register first before proceeding. Click the
Registration icon and fill in the required information.
When done, select the Register button, confirm the entered information, and then select Back to
home page.
• The eShop process screenshots illustrated on the following pages are for a dual brand dealer
request. Persons logging on to eShop from a single brand dealer will not see additional brand
selection and entry fields.
• Separate Dual-brand and Single-brand instruction callouts are included in the following
instructions steps where necessary.
• Dual-brand dealers must ALWAYS select BOTH the Audi and Volkswagen “Brand
products” during the request process!
(cont.)
Page 5 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. Click the Products Overview Icon:
6.
Select Offboard Diagnostic System Service via the Information Action arrow icon:
(cont.)
Page 6 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
7. Click the shopping cart icon (
applicable to your dealership:
) for a chosen brand. Wait a moment, and then proceed as
Single-brand dealer: Select To the shopping basket:
Dual-brand dealer: Click the additional brand shopping cart icon. Wait a moment, and then
select To the shopping basket:
(cont.)
Page 7 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. Click To the order:
DO NOT change the Quantity dropdown value ( 1 ).
9. Click the hardware key icon (
) for a brand product as illustrated:
(cont.)
Page 8 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10. Select Run:
11. If this prompt appears, select Run:
12. Select OK. The alpha-numeric hardware key is saved in Windows “clipboard” memory:
13. Right-click a Hardware key entry field for a Brand product and Paste the saved hardware key into the
field as illustrated:
(cont.)
Page 9 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
14. Right-click the computer name field and Paste the hardware key into the field as illustrated:
15. Dual-brand dealers: Repeat steps 13 & 14 to complete both entry fields for the additional brand:
(cont.)
Page 10 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
16. Minimize the Internet Explorer window with the current eShop session.
17. Restore the primary (desktop) AND backup (USB) device folder windows and Open each of their
prepared Hardware Key text documents:
18. Paste the hardware key (saved in clipboard memory) into both of the Hardware Key documents.
19. Save and Minimize the documents.
20. Minimize both device folder windows.
21. Restore the Internet Explorer window with the current eShop session.
22. Confirm that the hardware key appears in All Hardware key AND computer name entry fields as
illustrated, and then select To the order:
ATTENTION!
The hardware key entered in the computer name field is used by VWGoA to validate license
requests. The computer name field(s) MUST contain the hardware key! If data other than the
hardware key is entered in the computer name field, the license request will be denied!
(cont.)
Page 11 of 27
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
23. In the Order information section, accept the general terms of business by placing a checkmark:
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AOS-16-05
Replacement Service Bulletin Number:
MFR Communication Date: 2016-03-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.