Hexagon nut, M10
– Anti-roll bar to connecting link

2 ea.

Also required for vehicles with PASM/PDCC (I-no. 031/352):
999 084 132 01

Hexagon nut, M12
– Anti-roll bar to actuator

2 ea.

 Damage Code AH01 099 000 2

Feb 7, 2017
Page 18 of 23

AfterSales

2017© Porsche Cars North America, Inc.

Service

Technical Information
Scope 5:

13/17

ENU

AH01

2

Replacing fastening screws for fuel collection pipes
Body shape and vehicle equipment:
•
•

Cabriolet
Lane Change Assist (I-no. 457) and/or ParkAssist incl. reversing camera (I-no. 638)
Working time:
Replacing fastening screws for fuel collection pipes
Includes:
Raising and lowering the vehicle
Moving convertible top into service position
Reducing fuel pressure
Disconnecting and connecting battery
Removing and installing engine-compartment blower
Removing and installing tail lights
Removing and installing rear apron
Removing and installing rear spoiler
Removing and installing air guide for charge-air cooling
Removing and installing pressure pipes
Removing and installing air cleaner housing
Removing and installing retaining frame for charge-air cooler
Removing and installing support plate
Removing and installing diagonal braces
Removing and installing rear axle carrier with lower trailing
arms
Loosening and securing engine
Connecting and disconnecting battery charger
Connecting and disconnecting PIWIS Tester
Performing standardization run for rear spoiler
Bleeding fuel high-pressure system
Reading out and erasing fault memory
Calibrating Lane Change Assist
Calibrating reversing camera

Labor time: 521 TU

Parts required:
000 043 306 00

Torx screw, BM 6 x 85
– Fuel collection pipe

4 ea.

999 072 875 01

Hexagon-head bolt, M12 x 1.5 x 95
– Rear axle carrier, outer

2 ea.

999 072 931 01

Hexagon-head bolt, M12 x 1.5 x 110
– Rear axle carrier, inner

2 ea.

999 072 930 01

Hexagon-head bolt, M12 x 1.5 x 105
– Lower trailing arm to wheel carrier

2 ea.

2017© Porsche Cars North America, Inc.

AfterSales

Feb 7, 2017
Page 19 of 23

2

Service
AH01

ENU

Technical Information

13/17

999 084 445 01

Lock nut, M12 x 1.5
– Lower trailing arm to wheel carrier

2 ea.

999 072 869 01

Hexagon-head bolt, M12 x 1.5 x 45
– Rear diagonal brace

2 ea.

999 073 443 01

Combination screw, M12 x 1.5 x 40
– Front diagonal brace

2 ea.

N 908 484 05

Hexagon nut, M12 x 1.5
– Engine carrier to engine mount

2 ea.

999 512 707 00

Hose clamp, 9.6 - 11.3 mm
– Vacuum lines

4 ea.

999 512 498 00

Hose clamp, 13.1 - 15.3 mm
– Vacuum lines

2 ea.

Also required for vehicles without PASM/PDCC:
999 084 123 09

Hexagon nut, M10
– Anti-roll bar to connecting link

2 ea.

Also required for vehicles with PASM/PDCC (I-no. 031/352):
999 084 132 01

Hexagon nut, M12
– Anti-roll bar to actuator

2 ea.

 Damage Code AH01 099 000 2
Scope 6:

Replacing fastening screws for fuel collection pipes
Body shape and vehicle equipment:
•
•

Targa
Lane Change Assist (I-no. 457) and/or ParkAssist incl. reversing camera (I-no. 638)
Working time:
Replacing fastening screws for fuel collection pipes
Includes:
Raising and lowering the vehicle
Moving convertible top into service position
Reducing fuel pressure
Disconnecting and connecting battery
Removing and installing engine-compartment blower
Removing and installing tail lights
Removing and installing rear apron
Removing and installing rear spoiler
Removing and installing air guide for charge-air cooling

Feb 7, 2017
Page 20 of 23

AfterSales

Labor time: 533 TU

2017© Porsche Cars North America, Inc.

Service

Technical Information

13/17

ENU

AH01

2

Removing and installing pressure pipes
Removing and installing air cleaner housing
Removing and installing retaining frame for charge-air cooler
Removing and installing support plate
Removing and installing diagonal braces
Removing and installing rear axle carrier with lower trailing
arms
Loosening and securing engine
Connecting and disconnecting battery charger
Connecting and disconnecting PIWIS Tester
Performing standardization run for rear spoiler
Bleeding fuel high-pressure system
Reading out and erasing fault memory
Calibrating Lane Change Assist
Calibrating reversing camera
Parts required:
000 043 306 00

Torx screw, BM 6 x 85
– Fuel collection pipe

4 ea.

999 072 875 01

Hexagon-head bolt, M12 x 1.5 x 95
– Rear axle carrier, outer

2 ea.

999 072 931 01

Hexagon-head bolt, M12 x 1.5 x 110
– Rear axle carrier, inner

2 ea.

999 072 930 01

Hexagon-head bolt, M12 x 1.5 x 105
– Lower trailing arm to wheel carrier

2 ea.

999 084 445 01

Lock nut, M12 x 1.5
– Lower trailing arm to wheel carrier

2 ea.

999 072 869 01

Hexagon-head bolt, M12 x 1.5 x 45
– Rear diagonal brace

2 ea.

999 073 443 01

Combination screw, M12 x 1.5 x 40
– Front diagonal brace

2 ea.

N 908 484 05

Hexagon nut, M12 x 1.5
– Engine carrier to engine mount

2 ea.

999 512 707 00

Hose clamp, 9.6 - 11.3 mm
– Vacuum lines

4 ea.

999 512 498 00

Hose clamp, 13.1 - 15.3 mm
– Vacuum lines

2 ea.

Also required for vehicles without PASM/PDCC:

2017© Porsche Cars North America, Inc.

AfterSales

Feb 7, 2017
Page 21 of 23

2

Service
AH01

ENU

Technical Information

13/17

999 084 123 09

Hexagon nut, M10
– Anti-roll bar to connecting link

2 ea.

Also required for vehicles with PASM/PDCC (I-no. 031/352):
999 084 132 01

Hexagon nut, M12
– Anti-roll bar to actuator

2 ea.

Materials required:
AH010000001 *

Expendable items*
Tie-wrap (2 ea.)
approx. 4.0 mm wide, approx. 200 mm long

1 ea.
(for warranty invoicing
only*)

* The WWS Warranty system will automatically add into the “Miscellaneous item” section (sublet) of the
claim after the claim has been submitted.
 Damage Code AH01 099 000 2

Scope 11 - Checking engine number
Information
Vehicles with replacement engine installed
On vehicles in which a replacement engine was installed and the relevant engine number was not
documented, we cannot be sure that the correct fastening screws were used. The engine number on
these vehicles must first be checked.
A corresponding list of the replacement engines affected by the campaign is available for this
purpose in the PPN portal.
If a replacement engine affected by this campaign was installed in the respective vehicle, the
campaign must be carried out in accordance with the scope that is also assigned to the vehicle.
If the respective replacement engine is not affected, no further action is required.
Work Procedure: 1

Raise the vehicle on a lifting platform  Workshop Manual '4X00IN Lifting the vehicle'.

2

Read off the engine number on the crankcase and write it down  Workshop Manual '1001IN
Position and marking of engine number'.

3

Check the engine number using the list provided in the PPN portal.
•

Feb 7, 2017
Page 22 of 23

The engine number of the installed engine is included in the list of engines: The fastening
screws for the fuel collection pipes must be replaced. Continue with  Technical Information
'AH0100 AH01 Recall campaign - Replacing fastening screws for fuel collection pipes'.

AfterSales

2017© Porsche Cars North America, Inc.

Service

Technical Information
•

Scope:

13/17

AH01

ENU

2

The engine number that was read off is not included in the list: The installed engine is not
affected. Lower the vehicle and remove it from the lifting platform. End of action required.
For invoicing, see Scope 11.

Scope 11 – Checking engine number
Information
Scope 11 must only be invoiced if the installed replacement engine is not affected by this campaign and
no fastening screws must be replaced.
Working time:
Labor time: 24 TU

Checking engine number of the installed replacement engine
Includes:
Raising and lowering the vehicle
 Damage Code AH01 099 000 1

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. If a particular condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your authorized Porsche Dealer for the latest information
about whether a particular technical bulletin applies to your vehicle. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify the current and
correct part numbers. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS
Tester are the ones that must be followed.
© Porsche Cars North America, Inc.

Dealership
Distribution
Routing

Service Manager

_______

Shop Foreman

_______

Service Technician

________

_______

_______

_______

Asst. Manager

_______

Warranty Admin.

_______

Service Technician

________

_______

_______

_______

Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®,
Cayman®, Macan®, Panamera®, Speedster®, Spyder®, Tiptronic®, VarioCam®, PCM®, PDK®, 911®, RS®, 4S®, 718®, 918 Spyder®, FOUR UNCOMPROMISED®, and the model numbers and
distinctive shapes of the Porsche automobiles such as, the federally registered 911 and Boxster automobiles. The third party trademarks contained herein are the properties of their respective owners.
Porsche Cars North America, Inc. believes the specifications to be correct at the time of printing. However, specifications, standard equipment and options are subject to change without notice. Some
options may be unavailable when a car is built. Some vehicles may be shown with non-U.S. equipment. Please ask your authorized Porsche dealer for advice concerning the current availability of options
and verify the optional equipment that you ordered. Porsche recommends seat belt usage and observance of traffic laws at all times.
Printed in the USA

2017© Porsche Cars North America, Inc.

AfterSales

Feb 7, 2017
Page 23 of 23