NHTSA ID Number: 10117402
Manufacturer Communication Number: NTB17-034b
TSB/Document Date: 2017-09-14
Summary
2014 SENTRA AND 2017 SENTRA; CVT JUDDER AND/OR P0746/P0965 STORED This bulletin has been amended. Changes have been made on pages 2, 3, 9, 17, 23, 34, 35, 43, 44, 45, 83, 86 and 89 through 126. Please discard previous versions of this bulletin.
Step
66
Step
67
Figure 36
68. Select Start.
Step
68
Figure 37
117/128
NTB17-034b
69. Select Clear.
Step
69
Figure 38
70. Select Yes.
Step
70
Figure 39
118/128
NTB17-034b
71. When CVFT DETERIORATION DATE changes to “0”, select End.
0
Step
71
Figure 40
72. Start the engine.
73. Set the parking brake.
74 Turn OFF the A/C.
75. Bring the engine to normal operating temperature range.
76. Confirm the CVT fluid temperature is over 122°F (50°C).
119/128
NTB17-034b
Auxiliary gearbox clutch point learning
77. Navigate C-III plus to the screen shown in Figure 41.
Diagnosis (All Systems) > TRANSMISSION > Work support
78. Select Auxiliary gearbox clutch point learning.
79. Select Start.
Step
78
Step
79
Figure 41
80. Follow the on-screen instructions in Figure 42 and then select Start.
Step
80
Figure 42
120/128
NTB17-034b
81. With brake pedal still applied, shift the CVT selector lever into the D position.
Figure 44 will be displayed after shifting into D position.
NOTE: The Current status will show EXECUTING, but until the vehicle is shifted into the
D position Auxiliary gearbox clutch point learning will not begin.
Step
81
Figure 43
82. Continue to depress the brake pedal until the Current status shows “Completed” as
shown in Figure 45 on the next page.
NOTE: This may take several minutes to complete.
Figure 44
121/128
NTB17-034b
83. When completed is displayed, select End.
Step
83
Figure 45
84. Shift the vehicle into Park, turn ignition OFF and release the brake pedal.
85. Perform Auxiliary Gearbox Clutch Point Learning (steps 77 to 84) one additional time
(a total of two times).
Erase DTCs
86. Use C-III plus to Erase any transmission DTCs that may have stored.
87. Turn OFF C-III plus.
88. Disconnect C-III plus from the vehicle.
89. Verify the CVT operates normally and no abnormal noises are heard during a test drive.
Procedure complete.
122/128
NTB17-034b
PARTS INFORMATION
REPAIR
DESCRIPTION
PART #
QUANTITY
Sub-assembly
Repair
KIT-CONTROL VALVE
KIT-PULLEY
KIT-OIL PUMP
Loctite 5460 Sealant (2) (4)
Control Valve
Replacement
KIT-CONTROL VALVE
3170E-X428C
1 if needed
CVT
Replacement
CVT Assembly (6)
(7)
1 if needed
Applies to all
repairs
Nissan
NS-3 CVT Fluid (1) (4)
Additional Engagement Tool O-Rings (5)
WASHER-DRAIN
(CVT Oil Pan Drain Plug Gasket)
Lens Swab packet
999MP-NS300P
11440
As needed
As needed
11026-31X00
1
J-51963
(8)
3170E-X428C 1 if needed
31214-3JX9A 1 if needed
31340-X429E 1 if needed
999MP-LT5460P
(1) (3)
(1) Nissan NS-3 CVT Fluid and Loctite 5460 Sealant can be ordered through the Nissan
Maintenance Advantage program: Phone: 877-NIS-NMA1 (877-647-6621) or Website:
Order via link on dealer portal www.NNAnet.com and click on the “Maintenance
Advantage” link.
(2) One container of Loctite 5460 Sealant is good for approximately 5 repairs. This sealant
is not included in any kit.
(3) Bill out Loctite 5460 Sealant (or equivalent) under expense code 008. Do not include
the Loctite 5460 Sealant part number on the claim.
(4) For warranty repairs, Nissan NS-3 CVT Fluid and Loctite 5460 Sealant must be used.
For customer pay repairs, Nissan NS-3 CVT and Loctite 5460 Sealant Fluid or their
equivalents are recommended.
(5) Engagement tool will initially come with 10 O-rings. Additional O-rings are available from
Tech•Mate online: www.nissantechmate.com, or by phone: 1-800-662-2001.
(6) If the CVT is being replaced, no other parts in the table above, except NS-3 CVT fluid or
equivalent, are needed.
(7) Refer to the electronic parts catalog (FAST or equivalent) for the correct part number.
(8) Shop supplies.
123/128
NTB17-034b
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP
OP CODE
SYM DIA FRT
JD01AA
JD023A
CVT R&R
(2)
(1)
Inspect CVT Belt, Belt = NG (Includes
ZE 32
JX36AA
1.2
control valve R&I)
Replace CVT Sub-assembly
JX45AA
3.0
Reprogram TCM (MY14 Only)
JE99AA
(2)
(1) Reference the Parts Information Table and use the Kit-Pulley Part Number as the
Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
EXPENSE CODE
EXPENSE CODE
008
DESCRIPTION
Sealant
MAX AMOUNT
$12.46
OR
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP
OP CODE
SYM DIA FRT
Inspect CVT Pan for Excessive Debris = NG
JX49AA
0.3
ZE
32
JD01AA
Replace CVT
(2)
JD023A
(1) Reference the electronic parts catalog (FAST) and use the applicable CVT assembly
part number as the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
(1)
OR
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP OP CODE SYM DIA FRT
JX37AA
0.4
Inspect CVT Belt, Belt = OK
(1)
ZE 32
Replace Valve Body
JD48AA
(2)
Reprogram TCM (MY14 Only)
JE99AA
(2)
(1) Reference the Parts Information Table and use the Kit-Control Valve Part Number as
the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).
NOTE: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.
124/128
NTB17-034b
PART KITS REFERENCE TABLE
NOTE:
This Table is for reference only. Part numbers listed cannot be ordered individually.
These part numbers are for identification of the correct part within the kit (part
number is listed on the bag for each individual part).
Some parts have more than one part number listed. In this case, one of the part
numbers listed will be in the kit.
KIT-CONTROL VALVE (3170E-X428C) PARTS REFERENCE (Kit Content)
REFERENCE
#
DESCRIPTION
1
VALVE ASSY – CONTROL (Control valve)
2
GASKET-OIL PAN (Oil pan gasket)
3
STRAINER ASSY-OIL, AUTO TRANS
(Oil pan strainer)
PART NUMBER
QTY:
31705-X428C
or 31705-X429E
31397-3JX0A
31728-3XX0A,
or 31728-3XX0B,
or 31728-3JX0B
1
1
1
KIT-PULLEY (31214-3JX9A) PARTS REFERENCE (Kit Content)
REFERENCE
#
DESCRIPTION
5
PULLEY ASSY
(Sub assembly: Belt & Pulley)
SNAP RING KIT (Snap ring kit)
6
7
SEAL-O RING (Input shaft O ring)
8
SEAL – O RING
4
125/128
PART NUMBER
QTY:
31209-3JX9A
1
31506-3JX8B
31377-3JX0E,
or 31377-X420B,
or 31377-3XX2B
or 31377-X424C
31526-3MX0A,
or 31526-X420C,
or 31526-3XX0C
31526-8E000
or 31526-28X0C
1
NTB17-034b
11
1
2
Parts kits reference table continued.
KIT-OIL PUMP (31340-X429E) PARTS REFERENCE (Kit Content)
REFERENCE
#
DESCRIPTION
9
BOLT (Torque converter case bolts)
10
SEAL-LIP (Lip seal)
11
SEAL-O RING (Case O ring)
12
PIN-RET (Manual shaft roll pin)
13
PUMP ASSY-OIL (Oil pump)
14
GSKT-OIL PUMP (Oil pump gasket)
15
SEAL-O RING (Oil filter cover O ring)
16
FLTR ASSY-OIL,AUTO TRANS (Oil filter)
17
18
20
SEAL ASSY-OIL (Torque converter Seal)
SEAL-OIL,DIFF (Axle seals)
SEAL-O RING
(Primary/Secondary/Output Sensor O-ring)
SLEEVE-OIL DIST
21
RING-SEAL
19
126/128
PART NUMBER
QTY:
31377-X420B,
or 31377-3JX0E,
or 31377-3XX2B
or 31377-X424C
31528-1XZ0A,
or 31528-1XA01,
or 31528-1XX0A
31526-X420B,
or 31526-50X0D
or 31526-3JX0B
or 31526-3XX0B
31906-1XF0A
31340-X420B
or 31340-3JX0D
or 31340-X420A
or 31340-3XX0B
31366-3JX0B
or 31366-3JX0A
or 31366-3XX0A
31526-3JX3A
or 31526-3JX1B
31726-28X0A
or 31726-3JX0A
or 31726-3XX0A
31375-3JX1A
38342-3VX0A
19
1
1
1
1
1
1
1
1
2
31526-1XG0C
3
31374 80X01
31525 3JX0B
or 31525 X420A
1
NTB17-034b
2
PART KITS VISUAL REFERENCE
The following Figures show the smaller components of individual kits.
KIT- CONTROL VALVE is not shown.
KIT-PULLEY. Sub-assembly not shown
Figure G
KIT-OIL PUMP
Figure H
127/128
NTB17-034b
CVT Assembly Replacement Approval Procedures
If CVT inspection indicates CVT assembly replacement is required:
a. Complete the PCC CVT Preauthorization Form in ASIST.
b. Attach the required video (15 seconds or less) to the CVT Preauthorization
Form.
Failure to submit a continuous video showing evidence of abnormalities
and the VIN will cause immediate denial of request for CVT unit
replacement.
c. Call the PCC for authorization at 800-973-9992 (opt 2).
IMPORTANT: Make sure the video has a clear image of the VIN on the F.M.V.S.S.
certification label (VIN label).
128/128
NTB17-034b
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB17-034b
Replacement Service Bulletin Number:
MFR Communication Date: 2017-08-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN:AUTOMATIC TRANSMISSION
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.