CY) TOYOTA SIENNA
2016 PRE-DELIVERY SERVICE CHECK SHEET

T5B-000T-1t
AIM Ib

January 2016
= =
BEFORE INSPECTION [ii] [ UNDER VEHICLE (ON HOIST) 5 [i
1 Install Short Pin (see page 2)............00...c00cccceeeec esses O 1 Remove disk brake anti-rust covers/anti-corrosion

2 Initialize power sliding door’ (see page 2) 0.0.0.0. Oo wheel film". ratte ieecet oO
3 Initialize power back door* (see page 2) ........ ee o 2 Inspect tires for ‘defects/damage (including. spare tire’ )... seve oo
4 Initialize Parking Assist Monitor System’.............c00 cy 3 Initialize an Pressure Warning System (TPWS) od
S Install anterna®........sscsssccsssccssssesessseessscesssesvesssenses oO 4 — eae ae sicaps/spare tire wheel covers’ qa
FUNCTIONAL OPERATION 5 Inspect for fuel, oil, coolant, and other fluid leaks ............ Oo
Apply parking brake and cycie ignition “IG-ON’, place gear selector in reverse, turn 6 inspect under the vehicle for damage, rust, etc. .............../ 0

on lights and rear defogger. Unlock ail doors, release fuel door

oo

1 Check dome, courlesy, map, and sun visor lights*............

2 Check waring/indicator lights, gauges, and horn............. |G
3 Check windshield wipers and washer... tees (DO
4 Check headiights, instrument fights, tum n signals,

emergency flashers, and brake lights .. oOo
5 Check inside/outside rear view mirror

operation/adjustment... : 00
6 Check cigarette lighter* ‘and power outtets.. 0nd

7 Check sliding roof(s)*... Cc
8B Check audio/navigalion*/backup c: camera* 2* systems and

set clock... bee wee {OJ

9 Check Rear Seat Entertainment system operalion*.. 5

10 Check Automatic Door Lock (ADL) functian* oO

11 Install shift-lock override bution cover ........0 ose ILd

Oo

12 Check Auto Access Seat’ ...........cccccccccscssccccsesccesseusess

WALKAROUND INSPECTION

Start at left front door. Check window and door lock operation (from master power
switch, if equipped), Continue around vehicle in a counterclockwise direction
checking each door and window operation, child door locks, seat belts, interior
condition, all lights, luggage compartment contents Finish by checking headlight
aim and continue into UNDER HOOD checks.

1 Check Smart Key System*.........0cccccccssesseccecesecesevene oo
2 Check door and door lock operation, including each

wireless remote control/theft deterrent oa dee eceeeseeeenee oO
3 Check window operation... (00

4 Check that engine starts with all keys Arak. F ceareeseseceal 00
5 Check that child safety door locks are in normal

7 Visually check bolts and nuts on chassis and powertrain
fOr IOOSENESS. ...-.... see ecessescceceeeeecseeeeseeauaeessee eee ven seeeass

8 Install rubber body plugs (stored | in glove box or center
console)*... eneee pec eye ce pece ee ere te eenerepeaenensaeens

ROAD TEST

A compiete road test helps assure customer satisfaction Drive vehicle over a
variety of road surfaces and driving conditions. Check for unusual noise and driving
performance.

Enter Odometer Readings

Reading Before Test: Reading After Test:

1 Check cold engine operation .. cevdeaueeeaseveseeseneseese
2 Check engine operation during w warm- “Up .. becca eteeeteee ee eseees
3 Check engine at normal operating temperature ...............
4 Check automatic transmission operation .................0.:00+
5 Check brake and parking brake operation ......................
6 Check steering operation and off-center/vehicle pull/flutter
7 Inspect for abnormal noise and vibration ..............0......4..
8 Inspect for squeaks and rattles .. cect ene etts
9 Check front and rear* heater and ‘AIG ‘operation... deceeeeeeeseees
10 Check cruise control operation*
11 Check front seat heater/ventilation operation’ ...............-.
12 Sei/calibrate compass" (see page 2).................ccccece cena

dououuOUUdUUG
guuooog"UKGUD

FINAL INSPECTION AND CLEANING

{unlocked) position... . ane oo
6 Check seats and seat belt operation... jo
7 Check rear defogger/rear view mirror defogger’. oo
8 Check side marker, tail, backup, and license plate lights . (oOo
9 Check luggage compartment light* and trim appearance... (0 0
10 Adjust spare tire pressure* & check jack & tool installation [OJ O
14_ Check headlight aim... ...-sesesesseeeceeeeseeeestete oo
UNDER HOOD
1 Check engine oil level...........00:cccccessereeereeree (OO
2 Check brake fluid level... (OO
3 Check engine coolant level ....00.0 eee (OO
4 Check windshield washer fluid level...........000....0.00-0006 oo
5 Check battery state-of-charge using Digital Battery
System Analyzer (SOC Reading: Wa) -..0se oo
6 Inspect for fuel, oil, coolant, and other fluid leaks............, [2

1 Remove interior protective covers, unnecessary labels,
tags, elc. (Remove just before delivery to customer) ......
2 Visually inspect all interior paris for installation, damage,
fit, Cirt, CC cee cee cce eer te eee e a eeeaee eee neyeee eee eeeaencuns
3 Verify floor mat application and install using
Petaiming ClPS*......cccscssscessssecsesereccsseeseesesseeenssessses
4 Verify green light is illuminated on SOS (Safety
Connect) button’. sees
5 Remove Rapgard™ ‘and clear protective bumper fi im*. veces
6 Wash and clean vehicle... ae
7 Inspect paint finish for scratches, chips, rust, ‘dents,
CAMAQE, CLC... .......ecercecceeee eee ceeeee eeceseueecuceeacueeereneees
8 Inspect exterior body parts for proper installation, damage,

Q00
QO O0

QO0
OOO

Q
Q

9 Place oil change sticker on inside of windshield, a

left corner... oo

10 Place Owner's Guide ‘and fi rst aid kit portfolio* | in n glove ‘box oOo
11 Install front license plate and mounting bracket*

(see page 2)... avant {9 OF
12 Perform Techstream Health Check........-s..cccssssseesee0e--e-- 00
13 Install receiver towing hitch cap*.................eeceeeeeeererees a

* [Inspect or install when equipped/required.

Completion and retention of this form is required to comply with Toyota's Warranty Policy.

We hereby certify that all items

on this form have been

TECHNICIAN'S SIGNATURE SERVICE MANAGER'S SIGNATURE
checked and corrected for
proper operation as required.
NAME (PLEASE PRINT) NAME (PLEASE PRINT)
Date Dealer Name Dealer Code Vehicte tdentification Number (Sticker)

SHORT PIN INSTALLATION

To minimize battery discharge the Short Pin has been removed and is
stored in the engine compartment relay block. Install the Short Pin and
confirm all related DTCs are cleared.

DTC Clearing Procedure

1. Connect Techstream to DLC3.

2. Cycle the ignition switch to the “IG-ON" position.

3. Using Techstream, check any other codes being output.
4. Erase DTCs (B1650 and B1794) and Freeze Frame Data.

NOTE

If any DTCs besides B1650 and B1794 remain, repair the applicable
system according to the Repair Manual.

1 Storage Location 2 Instaflation Location Front

POWER SLIDING AND POWER BACK DOOR INITIALIZATION

As a result of the removal of the Short Pin, the “automatic open
and close” and “jam protection” functions of the power sliding
and power back door will be inoperative due to loss of the
power back door position. Initialize the power back door after
installing the Short Pin in its original location during

i i a@

Pre-Delivery Service (PDS). 4°

Power Sliding Door

Refer to the Repair Manual! for the f

Initialization procedure. (=)

Power Back Door ‘.

Refer to the Repair Manual for the

itializati ' 8 Transmitter Switch

initfazatlon) procera + Boor conta senen * Fao Sma ey Syste fea ey Syste
2 Power Sliding Boor Switch @ PSD Gunton (Li) ® PSD Button (LH
a Powet Sikling Door Satetwie Saitoh 7 PSD Buttan (RH) 10 PSO Button (iH}

TIRE PRESSURE WARNING SYSTEM (TPWS) INITIALIZATION

Refer to the Repair Manual for the Initialization procedure.

NOTE

To adjust the tire pressure correctly when the outside temperature is significantly colder than shop temperature, perform a
Health Check using Techstream and select the “Compensation Tire Pressure” checkbox. Compensation pressures will be
displayed on the Health Check results screen. Adjust the tire pressure when the tires are cold.

COMPASS CALIBRATION

Refer to the Repair Manual for the Calibration procedure for vehicles equipped with a compass in the rear view mirror.

NOTE

*« Do NOT perform calibration of the compass in a place where the Earth's magnetic field is subject to interference by artificial
magnetic fields (underground parking, under a steel tower, between buildings, roof parking, near a railroad crossing, etc.).

e During calibration, do NOT operate electric systems (moon roof, power windows, etc.) as they may interfere with
the calibration.

FRONT LICENSE PLATE & MOUNTING BRACKET INSTALLATION*

1. Insert the license plate into the front license plate bracket.

2. Align the installation holes on the front ficense plate
mounting bracket and front license plate with the dimples on
the front bumper.

3. Screw in the 2 self-tapping screws directly into the dimples
to install the front license plate and mounting bracket onto
the bumper.

NOTICE
e Do NOT pre-drill holes into the bumper.
¢ Do NOT overtighten the self-tapping screws.

1 Dimples 2 Front License Plate Bracket 3 License Plate 4 Self-tapping Screws