Technical Service Bulletin

Audi

24 Changeover valve for intake manifold flap N316, DTC P2015
24 16 54 2044003/2 May 24, 2016. Supersedes Technical Service Bulletin Group 24 number 16-53 dated April 19,
2016 for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

A3, A4, A5, A5
Cabriolet, TT

2010

All

2.0L engine

A3, A4, A5, A5
Cabriolet, Q5, TT

2011

All

2.0L engine

A3, A4, A5, A5
Cabriolet, A6, A7,
Q5, TT

2012- 2013

All

2.0L engine

A4, A5, A5 Cabriolet,
A6, A7, Q5, TT

2014

All

2.0L engine

A4, A5, A5 Cabriolet,
A6, A7, Q3, Q5, TT

2015

All

2.0L engine

A4, A5, A5 Cabriolet,
Q3, Q5

2016

All

2.0L engine

Condition
REVISION HISTORY
Revision

Date

Purpose

2

-

Revised Warranty (Changed Damage Code; updated time for Q3 and TT)

1

4/19/2016

Initial publication

•

Engine warning lamp on.

•

DTC P201500 (Intake manifold runner position sensor/switch circuit range/performance) is stored in the engine
control module (ECM), J623 (address word 01).

Technical Background
Corrosion in valve for intake manifold flap N316.

Production Solution
Not applicable.

Page 1 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.

Technical Service Bulletin

Audi

Service
1. Check the intake manifold flap valve N316 with Guided Fault Finding.
2. If the intake manifold flap valve N316 is faulty, replace it
with part number 06H 906 283 B. This new valve has an
additional connection for the fresh air line (Figure 1).

Figure 1. New valve with part number 06H 906 283
B (right) has an additional connection for the fresh
air line.

3. Install fresh air line with part number 06H 133 583 F by
first routing it along the cylinder head cover, then
securing it with the included clips on the high pressure
fuel line and activated charcoal filter cable (Figure 2).
•

On in-line engines: Loosen the securing bolt for
engine wiring between the second and third cylinder
and secure the fresh air line with this bolt (Figure 3).

•

On transverse engines: The M6 x 14 bolt with part
number N 107 732 01 (thread-cutting) must be used
in addition. Tighten the bolt with 9 Nm +/- 1 Nm.

When routing the clean air line to the intake manifold flap
valve, ensure that the clean air line is routed between the
cylinder head cover and the vacuum unit lever for the
Figure 2. Routing of fresh air line.
intake manifold flap (Figure 4).

Figure 3. Securing bolt for engine wiring in in-line
engine.

Page 2 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.

Technical Service Bulletin

Audi

Figure 4. Routing of clean air line to intake manifold
flap valve.

Warranty
Claim Type:

Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.

Service Number:

2466

Damage Code:

0028

Labor Operations:

For all vehicles exce(!t A3, Q3, and TT:
Remove and install intake manifold flap valve

2466 1913

30 TU

Install clean air line for solenoid valve

2466 2399

20 TU

Charge battery

2706 8950

10 TU

Remove and install intake manifold flap valve

2466 1913

40 TU

Install clean air line for solenoid valve

2466 2399

20 TU

Charge battery

2706 8950

10 TU

Remove and install intake manifold flap valve

2466 1937

30 TU

Install clean air line for solenoid valve

2466 2399

20 TU

Charge battery

2706 8950

10 TU

For Q3 and TT only:

For A3 only:

Page 3 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.

Technical Service Bulletin
Diagnostic Time:

Guided Fault Finding/Guided Function

Audi

0150 0000

Time stated
on diagnostic
protocol
(Max 30 TU)

Road test prior to service procedure

No allowance 0TU

Road test after service procedure

No allowance 0TU

Technical diagnosis at dealer's discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:

As per TSB #2043894/2

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Required Parts and Tools
Part Number

Part Description

Quantity

06H906283B

Solenoid valve

1

06H133583F

Connecting hose

1

N 10773201

M6 x 14 bolt (transverse engine only)

1

Additional Information
All parts and service references provided in this TSB (2043894) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.

Page 4 of 4
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights arc reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.