NHTSA ID Number: 10086504
Manufacturer Communication Number: L-SB-0039-16
TSB/Document Date: 2016-12-17
Summary
TSB: SOME 2014 2016 MODEL YEAR CT 200H VEHICLES MAY EXHIBIT A MIL ON CONDITION WITH DIAGNOSTIC TROUBLE CODE (DTC) P2610 (ECM/PCM ENGINE OFF TIMER PERFORMANCE) PRESENT. THE ENGINE CONTROL MODULE (ECM) LOGIC HAS BEEN MODIFIED TO REDUCE THE POSSIBILITY OF THIS CONDITION. FOLLOW THE REPAIR PROCEDURE BELOW TO ADDRESS THIS CONDITION.
L-SB-0039-16
July 14, 2016
MIL "ON" DTC P2610
Service
Category
Section
Market USA
Engine Control
Applicability
YEAR(S)
MODEL(S)
2014 - 2016
CT200H
ADDITIONAL INFORMATION
Introduction
Some 2014 – 2016 model year CT 200h vehicles may exhibit a MIL “ON” condition with
Diagnostic Trouble Code (DTC) P2610 (ECM/PCM Engine Off Timer Performance) present. The
Engine Control Module (ECM) logic has been modified to reduce the possibility of this condition.
Follow the Repair Procedure below to address this condition.
Warranty Information
OP CODE
DESCRIPTION
TIME
EG1622
Reprogram ECM (PCM)
0.4
MODEL YEAR
OFP
2014
89660-76080
2015 – 2016
89660-76170
T1
T2
8A
99
APPLICABLE WARRANTY
This repair is covered under the Lexus
Federal Emission Warranty. This warranty is in effect
for 96 months or 80,000 miles, whichever occurs first, from the vehicle’s in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
© 2016 Lexus, a division of Toyota Motor Sales, USA
Page 1 of 5
L-SB-0039-16
July 14, 2016
Page 2 of 5
MIL "ON" DTC P2610
Parts Information
PART NUMBER
MODEL YEAR
PREVIOUS
NEW
2014
89660-76080
89660-76081
2015 – 2016
89660-76170
89660-76171
–
00451-00001-LBL
PART NAME
QTY
Computer, Engine Control (ECM)
–
Authorized Modification Labels
1
NOTE
The ECM (PCM) should NOT be replaced as part of the Repair Procedure.
Authorized Modification Labels may be ordered in packages of 25 from the Materials
Distribution Center (MDC) through Dealer Daily – Dealer Support Materials Orders.
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
GR8 Battery Diagnostic Station*
00002-MCGR8
1
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
REQUIRED EQUIPMENT
SUPPLIER
PART NUMBER
Techstream 2.0*
Techstream Lite
QTY
TS2UNIT
ADE
Techstream Lite (Green Cable)
TSLITEPDLR01
TSLP2DLR01
* Essential SST.
NOTE
Only ONE of the Techstream units listed above is required.
Software version 11.10.034 or later is required.
Additional Techstream units may be ordered by calling Approved Dealer
Equipment (ADE) at 1-800-368-6787.
The Diagnostic Tester is NOT recommended for flash reprogramming.
Please use Techstream or an approved J2534 interface to perform flash
reprogramming updates. Visit techinfo.toyota.com for more information
regarding J2534 reprogramming.
© 2016 Lexus, a division of Toyota Motor Sales, USA
1
L-SB-0039-16
July 14, 2016
Page 3 of 5
MIL "ON" DTC P2610
Calibration Information
CALIBRATION ID
MODEL YEAR
PREVIOUS
NEW
2014
37608000
37608100
2015 – 2016
37616000
37616100
Repair Procedure
1. Using Techstream, check for the following stored DTC.
DTC P2610 – ECM/PCM Engine Off Timer Performance
Is the DTC present?
YES – Go to step 2.
NO – This bulletin does NOT apply. Continue diagnosis per the Repair Manual.
© 2016 Lexus, a division of Toyota Motor Sales, USA
L-SB-0039-16
July 14, 2016
Page 4 of 5
MIL "ON" DTC P2610
Repair Procedure (Continued)
2. Check for the Authorized Modifications Label affixed to the vehicle in the location shown below.
Confirm if the ECM (PCM) calibration has been updated.
Is the calibration ID listed NOT the latest ECM (PCM) calibration?
YES – Go to step 3.
NO – This bulletin does NOT apply. Disregard this Service Bulletin and continue diagnosis
per the Repair Manual.
Figure 1. Location of Authorized Modification Label for 2014 – 2016 CT 200h
1
Replacement ECM (PCM) Part Number
(i.e., 89660-76081 or 89660-76171)
4
Date Completed
2
New Calibration ID (i.e., 37608100 or 37616100)
5
This SB Number
3
Dealer Code
© 2016 Lexus, a division of Toyota Motor Sales, USA
L-SB-0039-16
July 14, 2016
Page 5 of 5
MIL "ON" DTC P2610
Repair Procedure (Continued)
3. Flash reprogram the ECM (PCM).
NOTE
The GR8 Battery Diagnostic Station MUST be used in Power Supply Mode to maintain
battery voltage at 13.5 volts while flash reprogramming vehicle.
For details on how to use the GR8 Battery Diagnostic Station, refer to the GR8
Instruction Manual located on the Technical Information System (TIS), Diagnostics –
Tools & Equipment – Battery Diagnostics.
Follow the procedures outlined in Service Bulletin No. L-SB-0021-14, “Techstream ECU Flash
Reprogramming Procedure,” and flash the ECM (PCM) with the NEW calibration
file update.
4. Install the Authorized Modifications Label.
A. Using a permanent marker, enter the following information on the label:
ECM part number [Refer to the Parts Information section for the NEW
PART NUMBER]
Calibration ID(s) [Refer to the Calibration Information section for the NEW
CALIBRATION ID]
Dealer Code
Repair Date
Change Authority [This bulletin number]
B. Affix the Authorized Modifications Label to the vehicle at the location shown in Figure 1.
The Authorized Modifications Label is available through the MDC, P/N 00451-00001-LBL.
5. Test drive the vehicle to confirm proper vehicle operation.
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L-SB-0039-16
Replacement Service Bulletin Number:
MFR Communication Date: 2016-07-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.