ISX12 G CM2180 EJ Laminar Flow Screen Removal

TRP Number
T1486

Revision Level

Page 1 of 3

Date
22-APR-2014

Expiration Date (U.S. and Canada)
01-APR-2015
Engine Family

Fuel System

Group Number

Expiration Date (International)
01-APR-2015
Plant

Build Date
From

To

Temporary Repair Practice
ISX12 G CM2180 EJ Laminar Flow Screen Removal
Attention




U.S / Canadian Distr./Branches and Div. Offices
Worldwide distr./ branches and Div./Reg Offices
U.S / Canadian Dealers

If additional information is required, contact your Cummins Warranty Operations Group
Leader.

Description
This Temporary Repair Practice authorizes repair locations to remove and discard the laminar
flow screen, part number 3929159, on ISX12 G CM2180 EJ applications when working on the
fuel control housing or removing the fuel transfer tube.

Action
In order to qualify for repair under this field action, an engine:
1. will be covered Regardless of coverage status, and
2. must be on the attached ESN list, and
3. must have repair or troubleshooting on one or more of the following components: fuel
control valve, gas mass flow sensor, fuel pressure/temperature sensor, fuel transfer tube,

https://quickserve.cummins.com/qs3/pubsys2/xml/en/trp/2014/t1486.html

5/2/2014

ISX12 G CM2180 EJ Laminar Flow Screen Removal

Page 2 of 3

and fuel control housing.
After verifying that the engine meets the above requirements, perform the following actions:
When working on the fuel control valve, gas mass flow sensor, fuel pressure/temperature
sensor, fuel transfer tube, and/or fuel control housing, remove and discard the laminar flow
screen, Part Number 3929159, and reassemble without the laminar flow screen. Please refer
to ISX12 G CM2180 EJ Service Manual, Bulletin Number 4310682, Procedure 005-009, Fuel
Control Housing, for details of the laminar flow screen location.

Material Disposition
Materials removed as a result of this field action must be scrapped unless the laminar flow
screen is torn/ruptured. Document and return any torn/ruptured laminar flow screen on a
Product Incident Report in the Technical Service Request database (care.cummins.com).

Reimbursements
Parts
There are no parts covered in this field action.
NOTE: SRTs to gain access that are required to complete the repair, that are sufficiently
explained in the claim narrative, may also be claimed on this action.
NOTE: File SRT 99-902, quantity 2, for removal of the laminar flow screen from the inlet
of the fuel control housing.

Labor using applicable Access Code and Time:
SRT Code
00-90X
99-902

Description
Administrative time
Removal of Laminar Flow Screen (QTY 2)

Time (hrs)
0.2

Travel
Travel is not covered under this field action. Towing is not covered under this field action.

Other Claimables
Consumables are not covered under this field action.

Claim Instructions
For Cummins Dealers, claims for this TRP must be filed via RAPIDSERVE™ Web
(rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the
"Warranty" tab in QuickServe® Online. If there are additional questions, please contact your

https://quickserve.cummins.com/qs3/pubsys2/xml/en/trp/2014/t1486.html

5/2/2014

ISX12 G CM2180 EJ Laminar Flow Screen Removal

Page 3 of 3

local Cummins Distributor.
Claim Codes
Description
Account Code:
Pay Code:
Pay Code:
Pay Code:
Failure Code:

Code
65
Distributor = X
Dealer = D
International = I
WNCSNB

Attachments
Click here to see t1486_esn-list.xls
Last Modified: 22-Apr-2014
Copyright © 2000-2010 Cummins Inc. All rights reserved.

https://quickserve.cummins.com/qs3/pubsys2/xml/en/trp/2014/t1486.html

5/2/2014