®TOYOTA
Technical Service Bulletin

September 27, 2013

T-SB-0149-13

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)
Service
Category
Section

General

l.W\

Pre-Delivery Service

Market

Toyota Supports
ASE Certifica tion ~

USA

Applicability
YEAR(S)

MODEL(S)

2014

Ava Ion, Ava Ion HV

ADDITIONAL INFORMATION

Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback
indicates the follavving areas deserve special attention when performing PDS :
• Careful inspection for paint chips/scratches and body dents/dings.
• Proper operation of electrical accessories (including interior light, clock, and radio reset).
•

Interior cleanliness.

• Proper function of mechanical systems.
Customer retention and proper maintenance of vehicles has been a major focus for Toyota . To help
remind customers that regular oil changes are essential to the proper maintenance of their vehicle,
dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing
this, customers will be reminded to return to your dea lership for the ir first oil change. Your current
oil change reminder sticker may be used. (See PDS Check Sheet item 9 of "Final Inspection &
Cleaning.')
A new PDS Check Sheet has been developed for the 2014 model year Avalon. Some check points
have been added, expanded , or clarified. Bulletins are available for items in bold type.
Warranty Information
OP CODE

DESCRIPTION

001013

Pre-Delivery Service (PDS)

MODEL

TIME

Avalon

1.1

Avalon HV

1.5

© 2013 Toyota Motor Sales , USA

OFP

N/A

T1

T2

N/A N/A

Page 1 of 7

@TOYOTA

T-SB-0149-13

Page 2 of 7

September 27, 2013

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Warranty Policy

If the need for additional repairs or adjustment is noted during the Pre-Delivery Service, the required
service should be performed under warranty. Reimbursement will be managed under the warranty
policy.
The Warranty Policy and Proced.Jres Manual requires that you maintain the completed PDS
check sheet in the customer's file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit.
An additional Repair Order completed in conjunction with normal PDS must have time puncMlags
for service . If multiple repairs are performed , separate time flags must be punched for each repair.
Required Tools & Equipment
REQUIRED EQUIPMENT

SUPPLIER

Techstream 2 .0*
TIS Techstream

PART NUMBER

QTY

TS2UNIT
ADE

Techstream Lite

TSPKG1

1

TSLITEDLR01

• Essential SST.

NOTE
• Only ONE of the Techstream units listed above is required .
• Software version 8.20.019 or later is required.
• Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at
1-800-368-6787.

Before Inspection

When performing new car Pre-Delivery Service, install Short Pin before mewing vehicle from storage
lot so that FUNCTK:>NAL OPERATK:>N checks can begin as soon as vehicle is moved into the
service stall.

1. Install Short Pin* - T-SB-0146-13
NOTE
The Short Pin is removed only on vehicles going to Hawaii , Puerto Rico, Saipan, Guam, and
American Samoa.

© 2013 Toyuta Motor Sales , USA

@TOYOTA

September 27, 2013

T-SB-0149-13

Page 3 of 7

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Functional Operation

Apply parking brake and cycle ignition "IG-ON," place gear selector in reverse , turn on lights and rear
defogger. Unlock all doors, release fuel door, release trunk hatch.
1. Check dome, courtesy, map, and sun visor lights*
2. Check warning/indicator lights, gauges, and horn
3. Check windshield wipers and washers
4. Check headlights, instrument lights, turn signals, emergency flashers , and brake lights
5. Check inside/outside rear view mirror operation/adjustment
6. Check cigarette lighter* and power outlets
Check the power outlet using an electrical accessory designed for this use.
7. Check audio/navigation*/backup camera* systems and set clock
For navigation, set the destination search area to local position.

8. Verify Entune/Navigation software version (Display Audio, Non-HOD Type only)* T-SB-0026-12
9. Install shift-lock override button cover

10. Check sliding roor
11. Check rear sunshade operation*
Walkaround Inspection

Starting at the left front door, check window and door lock operation and the operation of all pwer
windws and door locks from master switch, on vehicles so equipped . While walking around vehicle
in a counterclockwise direction, open left rear door and check operation of window regulator and
door lock , set child safety door locks to the normal (unlocked) position. Assure tightness of interior
garnishes and check seat belts . Inspect trunk contents and lights at rear of vehicle. Repeat checks
at right rear door. Inspect right front door window regulator and lock operation and garnishes. Check
seat and seat belt operation. Continue on around to the front of the vehicle checking lights.

1. Check Smart Key System* - T-SB-0020-13
2. Check door and door lock operation , including each wireless remote control/theft deterrent
system*
3. Check window operation
4. Check that engine starts with all keys
5. Check that child safety door locks are in normal (unlocked) position

© 2013 To)'l:lta Motor Sales . USA

@TOYOTA

September 27, 2013

T-SB-0149-13

Page 4 of 7

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Walkaround Inspection (Continued)

6. Check seats and seat belt operation
7. Check rear defogger/rear view mirror defogger*
8. Check side marker, tail, backup , and license plate lights
9. Check luggage compartment light* and trim appearance

10. Adjust spa re ti re pressure , inspect for damage, and check jack and tool installation
11 . Check headlight aim

Refer to the Repair Manual for procedures.
Under Hood

1. Check engine oil level
2. Check brake fluid level
Visually inspect using see-through reservoirs .
3. Check engine coolant level
4. Check lrwerter fluid level*
5. Check windshield washer fluid level

6. Check battery state-of-charge using Digital Battery System Analyzer
Refer to Service Bulletin No. PG001-06 . "Battery Maintenance for In-Stock Vehicles &
Pre-Delivery. "
NOlE
Battery SOC should be a minimum of 75%. Please enter the SOC Reading on the space
provided on the check sheet and attach the printout to the check sheet

7. Inspect for fuel , oil, coolant, and other fluid leaks
Battery Maintenance*

1. Perform HV battery check and maintenance - T-SB-0026-13

© 2013 Toyota Motor Sales , USA

@TOYOTA

T-SB-0149-13

September 27, 2013

Page 5 of 7

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Under Vehicle (On Hoist)

1. Remove disc brake anti-rust covers/anti-corrosion wheel film* - PD017-04
Visually inspect rotors for rust.
NOTE

For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.

2. Inspect tires for defects/damage

3. Initialize Tire Pressure Warning System (TPWS) - see check sheet
4. Install wheel covers/caps/spare ti re wheel covers*
5. Check hybrid transmission fluid level*
6. Inspect for fuel , oil, coolant, and other fluid leaks
7. Inspect under the vehicle for damage, rust etc.
8. Visually check bolts and nuts on chassis and powertrain for looseness
9. Install rubber body plugs (stored in glove box or center console)*
Install the 4 rubber plugs into front and rea r torque box holes.
10. Install front wheel opening extension pads - see check sheet
Road Test

A complete road test helps assure customer satisfacti on. Drive vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and driving performance .
1. Check cold engine operation
Check starting and fast idle operation performance.
2. Check engine operation during warm-up
Check that engine operates smoothly during warm-up.
Check for unusual noise, engine vibration, rough idle, etc .
3. Check engine at normal operati ng temperature
Check engine performance over a broad range of driving conditions, including idle quality,
acceleration, cruise, and deceleration.
4. Check transmission operation*
Check transmission operation, including operation* in each range, neutral start switch, and
shift lock system .
© 2013 Toy:ita Motor Sales , USA

@TOYOTA

September 27, 2013

T-SB-0149-13

Page 6 of 7

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Road Test (Continued)

5. Check brake and parking brake operation
Check brake function, including unusual noise, parking brake performance, and all related
brake system indicator lights.
6. Check steering operation and off-center/vehicle pulVflutter
Check steering function.
Check steering off-center/vehicle pull/flutter.
7. Inspect for abnormal noise and vibration
8. Inspect for squeaks and rattles
9. Check Blind Spot Monitor System*
10. Check front and rear* heater and NC operation
11. Check cruise control operation*
Check cruise control , including On-Off switch, "SET/COAST;' "RESUME/ACCEL;' and
"CANCEL:' functions.
12. Check front seat heater/ventilation* operation
13. Check driver's seat memory operation*
14. Set/calibrate compass* - see check sheet
Final Inspection & Cleaning

1. Remove interior protective covers , unnecessary labels, tags , etc. (Remove protective covers
just before delivery to the customer)
Remove plastic covers from door panels, seats , head restraints, and sun visors, as required.
Remove labels, tags, and stickers (except those containing owner information).
NOTE

Consumer infonnation labels, such as airbag information warning and bumper information
labels, MUST be left on the vehicle until delivery to a retail customer.

2. Visually inspect all interior parts for installation, damage, fit, dirt, etc.
3. Verify floor mat application and install using retaining clips* - T-SB-0023-13
4. Verify green light is illum inated on SOS (Safety Connect) button*

© 2013 Toytita Motor Sales , USA

@TOYOTA

September 27, 2013

T-SB-0149-13

Page 7 of 7

2014 Avalon/Avalon HV Pre-Delivery Service (PDS)

Final Inspection & Cleaning (Continued)

5. Remove Rapgard ™ and clear protective bumper film*
Ensure that ALL glue residue is removed.
6. Wash and clean vehicle
7. Inspect paint finish for scratches, chips, rust, dents, damage, etc.
8. Inspect exterior body parts for proper installation, damage, rust, etc.
9. Place oil

chang~

sticker on inside of windshield, top left corner

Complete the mileage or date recommendation and apply the oil change reminder sticker to the
inside of the windshield, top left corner. You may use your current oil change reminder sticker.
10. Place Owner's Guide and first aid kit portfolio* in glove box
11. Install front license plate & mounting bracket* - see check sheet
12. Perform Techstream Health Check
Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check
results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic
Report function.
•Inspect or install v.hen equipped or required

© 2013 Toyota Motor Sales, USA