Dilute 50:1 - 75:1
Dilute 200:1 – 250:1
Dilute 3:1 – 5:1

Features & Benefits
Helps Fight Corrosion
Calcium. magnesium, and sodium chlorides greatly
accelerate the corrosion process. Salt Eliminator
is specifically formulated to remove these harmful
chlorides from vehicles and equipment.
Repels Moisture
Salt Eliminator creates a water repelling surface that
not only leaves a beading shine to the vehicle but also
helps slow salt from reforming on the surface.
Environmentally Friendly
Salt Eliminator doesn’t contain any phosphates or
petroleum solvents.
Safe on any Surface
Salt Eliminator can be used to remove salt stains from
carpets, upholstery, plastic, leather and vinyl.

*All Krown products are NPE/APE free.

Order Number & Sizes
Aerosol 6465146 4L 6465147
20L 6465148 205L 6465149

Automatic Bus Wash
Systems

Foam Gun

#6465156

Foam Cannon #6465157

Soap
Dispenser

Trigger
Sprayer

#6465160

Foam Brush

1 Gal. per sec.

#6465158

4 Gal. per sec.

#6465159

#6465161

The highlighted accessories are
designed to work along with Krown
Salt Eliminator to save time and
provide unparalleled results. Please
use all Krown products with the
appropriate safety gear.

Contact Krown At:
[email protected]
MSDS information available at www.krown.com

S
E
I
R
O
S
ACCE

BUS
Areas of Application

CITRUS

POWERED

E
V
L
O
S
O
ENVIR

•
•
•
•
•
•
•
•

Asphalt & Tar Removal
Liquefying Crude Oil
Metal Cleaning
Parts Washing
Brake Cleaning
Wall Cleaning
Fire & Smoke Cleanup
Adhesive Removal

•
•
•
•

Decal Removal
Oil Stain Removal
from Fabric/Carpets
Chewing Gum
Removal
Removes rust
bleeding and stains

Methods of Application
•
•

Apply with Rag
Pump up and
Trigger Sprayers

Directions For Use
1.

A versatile and user-friendly
citrus-solvent cleaner/degreaser.

Features & Benefits
Biodegradable and Environmentally safe
Made from a combination of citrus solvents,
emulsifiers and additives. Contains no petroleum
distillates.

Always test product in an inconspicuous
area before using.
2. Spray or wipe on.
3. Let stand for up to 10 minutes. (It is
preferable that the product not be
allowed to dry on the surface.)
4. Remove using one of the following
methods: a) Wipe product off with a
wash mitt or rag. b) Rinse with water
Order Number & Sizes
4L 6465150 20L 6465151 205L 6465152

Contact Krown At:
[email protected]

Powerful Cleaning
Enviro Solve is a versatile cleaner that can be used
for dissolving tar, adhesives and heavy grease.
Safe on Most Surfaces
Enviro Solve can be used on many different surfaces
including fabrics.
Floating Degreaser
Liquify crude oil and greases that are floating on the
water’s surface by adding Enviro Solve.

*All Krown products are NPE/APE free.

MSDS information available
at www.krown.com

BUS
Areas of Application
•
•

Steel Frame and Tubing •
Electrical Wiring &
•
Connections
•

Hinges & Locks
Moving Parts
Chains

Methods of Application
•
•

Pump & Gun System
Aerosol Can

•
•

Pressure Pot System
Portable Pot System

Directions For Use
1.

A petroleum-based corrosion
inhibitor designed to create a
long-lasting, self-healing barrier
between metal and water.
Krown is a manufacturer of Penetrants, Lubricants,
Corrosion Inhibitors and Cleaning Maintenance
Products. We manufacture products for agriculture,
automotive, bus, and trucking OEMs. Krown’s
products are used annually as part of preventative
maintenance programs with municipal and private
fleets across North America

Features & Benefits
Displaces Moisture
When applied to a metal surface, Krown bonds to the
metal, lifting water off the surface and creating a strong,
self-healing barrier. This creates a lasting protection
against rust.
Protects Electrical Components
With a dialectric strength that exceeds 50Kv, Krown can
be directly applied to electrical componets, sealing out
water and preventing corrosion.
Environmentally Friendly
Krown’s Rust Protection formula is not WHMIS
controlled and contains no solvents or VOCs.

Throughly clean area of application
to remove chlorides and salts with
Krown Salt Eliminator.
2. Krown Rust Protection is best applied
when the product is heated to 140
degrees F.
3. It is recommended that an approved
NIOSH mask be worn when applying
the product (in any mode, with the
exception of an aerosol.)
4. Mist product evenly over surface, until
it appears “wet”, too much overspray
will lead to excessive dripping and
product loss.
5. Clean up excess product (overspray)
from shop floor with a degreaser.
Order Number & Sizes
Aerosol 6465138 4L 6465139
20L 6465140 205L 6465141

Contact Krown At:
[email protected]
www.krown.com

These accessories are designed to work
along with Krown Rust Protection to save
time and provide unparalleled results.
Please use all Krown products with the
appropriate safety gear.

Pump & Gun
System

#6465153

Pot Spray
System

Krown Rust Protection is designed
to protect the bus chassis, tubular
structure and electrical components.
MSDS information available at www.krown.com

#6465154

Aerosol Can

#6465138

Pressure Pot
System

#6465155

LABOUR ESTIMATE
Operation

Men

Hours

Labour Time
M X HR

1

Disconnect and connect electrical. Lift bus.

1

1

1

2

Remove impact panels and apply corrosion protection on

1

1

*1

impact panel mounting brackets. (Only if required).
3

Drill holes along the bottom of the tube.

1

1

1

4

Apply salt eliminator, wash out debris from lower horizontal

1

3

3

tubes along the bottom of bus and entire underside.
5

Remove staining on underbody. Including cleaning drain holes.

1

1

1

6

Touch up sealant, zinc primer & corashield.

1

1

1

7

Apply Krown T-40 inside structure tubes.

1

2

2

8

Apply lithium grease, plug the holes and clean up of the bus

1

1

1

(include lowering bus).
Total: 10 hours
* With impact panels: 11 hours
(*) This labor time will only be applicable if the bus has lower impact panels.

PARTS REQUIRED
Units

Item

Part Number

1

235584

Undercoat – PPG 7972 W

3

055701

Sealant 221 White

0.5

EA

4

108936

Urethane PPG Catalyst S28079

0.2

GA

5

115956

PPG Green Zinc Powdercoat S28080

0.4

GA

6

116508

Plastic plugs

20

EA

7

34S00024

Screw – No.10-24 x 1.5

32

EA

*1

8

30W00000

Washer Lock No. 10

32

EA

*1

9

6465141

Krown T-40

12

L

10

6465149

Krown Salt Eliminator

5

L

11

6465150

Enviro Solve

0.5

L

12

597554

Foam-Impact Panel Plug

18

EA

*1

13

116507

11/2” Plastic plug

1

EA

As req’d

14

116511

1” Plastic plug

1

EA

As req’d



Description

Qty.
per
Coach
0.25

Notes

GA

1) Only order if buses have impact panels.

_________________________________________________________________________________________________________________
ITS: 5785
Page 52 of 53

SPECIAL TOOLS REQUIRED
Item
1

Part Number

Description

Qty.
per
Coach

Notes
Units

See all info on tools and products from
Krown on Appendix G.

_________________________________________________________________________________________________________________
ITS: 5785
Page 53 of 53