PERFECT DELIVERY INSPECTION (PDI)

2014

A6/S6/A6 TDI
Client

Audi Technician Report

Stock No.

Delivery Date

VIN

All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection

Under the Hood Fluid Check and Inspection
FF     Check all fluid levels and top off if necessary
FF     Check engine oil level via the MMI – fill oil to the max level
when the vehicle is at operating temperature
Trunk Inspection

Open Campaigns/Updates
FF     Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode.
Battery Inspection

FF     Install wheel bolt cover removal tool from PDI kit into trunk lid
toolkit
FF     Place the lug cap removal tool, located in the bypack, into the
toolkit (where applicable)
FF     Set spare tire pressure
FF     Verify operation of trunk emergency release handle

FF     Check battery clamps for proper torque. Re-torque if required

Exterior

FF     Perform the A-battery test for new batteries using GFF in ODIS
Diagnosis –> Special functions –> Service work. Select option 2,
the battery test for new batteries as part of the pre–delivery
inspection and act according to the test result (ok, recharge,
replace). Ensure diagnosis log is uploaded to the GFF paperless
server by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided
Function. The diagnosis log will not be uploaded to GFF paperless)

FF     Test windshield washers for aim and function

Transport Mode Deactivation, DTC check, set service reminder
FF     Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )
FF     Deactivate air suspension loading mode (via Special Functions
-> Service Work -> 34-Loading mode activating/deactivating)
(S6 only)
Warning! Car body may lower!
FF     Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)
FF     For MMI3G+ vehicles, set adaptation channel (via Special
functions –> Service work –> : 5F–Activating/deactivating
storage of music)

FF     Turn on headlights and test headlamp washers
FF     Test exterior lighting functions
FF     Check tailgate opening and closing with remote (if applicable)
FF     Check key functionality: Including seat and steering wheel position memory (if applicable); verify vehicle starts and runs with
the start/stop button; verify all doors lock/unlock with remote
and advanced key, including all door handle sensors with the
advanced key (if equipped)
FF     Start-Stop-System info (if applicable): Verify the velum sticker
is on the start/stop button. Remove the Start-Stop-System
information card from the car kit and place it in the glove box
with the owner’s manuals. Additional supply can be ordered via
the Brand Store on AccessAudi
Interior
FF     Check operation of all switches: locks, windows, seat adjustment, seat ventilation/heating (front and rear where applicable) and child safety features
FF     Rear view mirror: Check self-dimming function/lighting (if
equipped)

FF     Perform an SVM specified /actual comparison (via Special
functions ->Software Version Management (SVM))

FF     Verify operation of all interior lights, including ambient lighting

FF     Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)

FF     Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory

Effective 10-1-2013
Version 1.0

1 of 3

PERFECT DELIVERY INSPECTION (PDI)

2014 A6/S6/A6 TDI | Audi Technician Report

Client

Stock No.

Delivery Date

VIN

Interior (continued)

Onboard Video Tutorials (continued)

FF     Inspect operation of lighter, aux. outlet under armrest, under
rear vent outlets, and in luggage compartment on passenger side

FF     Select “Yes”

FF     Verify operation of all front and rear seat belts and latches
FF     Check horn operation

FF     Select “CD/DVD”
FF     Select “Start update”

FF     Check sunroof operation (open/close/vent/deflector at edge)

FF     Turn off ignition to start update (The update will take approx.
5 minutes)

FF     Turn on the night vision camera and verify operation (if
equipped)

FF     Once completed, remove the disk and place back into the case
for the next vehicle

FF     Rear Climate Controls: Verify heating and cooling functions and
open all rear panel vents (center & b-pillar)
FF     Passenger side airbag: Verify operation of Passenger Occupant
Detection System
Radio
FF     Verify operation of CD changer (if equipped)
FF     Verify operation of DVD player
FF     Verify operation of AMI
FF     SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)

Audi connect (if equipped) (USA ONLY)
FF     Verify Audi connect Information Packet is present, including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile
Terms & Conditions (T&C)(if applicable)
FF     Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with Box surrounding it)(only applies if in a T-Mobile service
area)
FF     Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol

FF     Verify HD Radio is turned “off” in Radio/Settings Menu
(USA ONLY)

FF     Ensure the wireless network is turned on (TEL function button
> Settings Ctrl button > Wi-Fi settings > Wi-Fi active > select
“Visible”)

Audi MMI/Navigation

FF     Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits
of VIN that are automatically preset in the system.

FF     Verify and set Language and Measurement Units in Setup Menu
FF     Set Time source setting to “GPS” and set Auto daylight savings
time to “on.” Change time zone appropriate to the dealer
location

On-Hoist Inspection

FF     Program the presets to local stations

FF     Check underside of vehicle for fluid leaks and loose
components

FF     Navigation: Set dealership location (for following back to
dealership during road test)
FF     Voice Activation: Press the “Talk” button and verify several
commands
FF     Set the “Music volume while parking” to 6 lines (accessed via MMI
rear view camera display, Settings > Music volume while parking)
(applies to vehicles with park assist or rear view camera).

FF     Inspect wheel bolts for proper torque using torque wrench

FF     Check steering, boots, brake system, hoses, tires and wheels
for damage
FF     Install wheel bolt covers from PDI kit on all wheels
FF     Set tires to maximum recommended tire pressures listed on
the B-pillar door jamb and store tire pressure values in Car/
System menu
FF     Remove Transport Blocks from shocks

Onboard Video Tutorials
FF     Load Onboard Video Tutorials
FF     Turn ignition on
FF     Insert the Onboard DVD into the DVD Drive
FF     Select the CAR function button. System will initialize
FF     Select the Owner’s Man. function by selecting the upper right
control button
Effective 10-1-2013
Version 1.0

FF     After removing transport blocks, secure Additional Springs
(a.k.a. bump stops) by pressing into tube of upper shock mount
Road Test
FF     Check for squeaks, rattles and wind noise
FF     Verify operation of Audi parking system plus with rear view
camera and top or corner view cameras (if equipped)
2 of 3

PERFECT DELIVERY INSPECTION (PDI)

2014 A6/S6/A6 TDI | Audi Technician Report

Client

Stock No.

Delivery Date

VIN

Road Test (continued)

Road Test (continued)

FF     Verify Vehicle Head-up Display functionality. Verify the image
can be adjusted properly in the viewing area of the windshield
(if equipped)

FF     Navigation function: Activate NAV and follow directions back to
dealership

FF     Verify engine performance and acceleration

FF     Verify NAV directions are visible in Head-Up Display (if
equipped)

FF     Verify transmission operation, including shift paddles
FF     Verify engine Start-Stop System functionality (if equipped)

Post-Road Test Inspection

FF     Check steering/tire alignment

FF     Interrogate fault memory using the VAS tester and print
Diagnostic Log

FF     Check heated steering wheel operation (if equipped)
FF     Test drive vehicle applying brakes at least 4 times at 20 mph
(35 km/h) to clean brake rotors. Check for abnormal noise/
vibration

FF     Record final mileage on checklist and sign checklist
FF     Ensure the yellow tire pressure tag is installed on steering
wheel

FF     Verify quality of radio reception in AM/FM/SAT bands
FF     Verify cruise control/ACC with Stop & Go functionality (if
equipped)

If Vehicle is for Showroom Display/Inventory Storage or Demo
Use

FF     Verify Audi side assist functionality (if equipped)

FF     Install showroom charger to ensure battery remains charged at
all times

FF     Verify Audi active lane assist (if equipped)
FF     Climate Control: Check heating and cooling functions and open
all panel vents

FF     Apply Inventory Maintenance Sticker
FF     Install standard wiper blades (if not already installed)

FF     Seat heating and cooling (if equipped): Check for proper operation

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature

Effective 10-1-2013
Version 1.0

Completion Date

3 of 3