NHTSA ID Number: 10065782
Manufacturer Communication Number: 15-157-12R
TSB/Document Date: 2016-05-19
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
contact the Service Center. Reference the exchange number and explain the circumstances
causing the delay. An extension will be granted or the dealer will be instructed to return the
exchange unit. Failure to comply will result in a “charge back” to the dealer for the cost of the
exchange unit.
ILLUSTRATION
DESCRIPTION
MANUFACTURER
PART NUMBER
Tribeca
Rear Seat DVD
unit Gray
RC1
Panasonic
86255XA00BMW
Tribeca
Rear Seat DVD
unit Beige
RC1
Panasonic
86255XA00BEU
Legacy / Outback
Headrest
DVD Monitor
Assembly (Left
or Right)
Myron and Davis
H001SAJ320
Legacy / Outback
Aii Module
Myron and Davis
H001SAJ370
S00102
S00102
8.4.9.3 NAVIGATION SYSTEM EXCHANGE PROGRAM
Within the terms of the Basic New Car Warranty and the one year Replacement Part Warranty,
the Navigation System Exchange Program provides for replacement of a defective navigation
assembly and/or display screen with an exchange unit from the manufacturer. The manufacturer will supply an exchange unit, or a new unit in the case of a “New” and “In-stock”
vehicle. Vehicles that have been placed in demo service should use exchange units only.
Note: DO NOT disassemble a Navigation Assembly to retrieve a lodged DVD prior to
returning to the manufacturer. See Section 8.4.9.4 for the policy on returning the DVD to the
customer.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 10
Genuine Subaru
navigation systems are manufactured by Kenwood Corporation and Fujitsu
Ten Corporation. In the event a navigation unit or display screen requires an exchange, it
is not necessary to remove the unit from the vehicle. The procedures listed below must be
followed:
1) The defective unit should remain in the vehicle until the exchange unit is installed.
2) The applicable Service Center should be contacted, preferably through their website or by
faxing a legible copy of the Exchange Request Form.
KENWOOD CORPORATION
The Kenwood Corporation may be contacted through their website or by faxing a legible
copy of the Kenwood Exchange Form (Section 17.9). The on-line Exchange Form is found in
Subarunet, under Service, then Forms. Service Center is open from 9 AM – 5:30 PM Pacific
Time. Requests arriving after 2:00 PM PST are processed the following business day.
KENWOOD CORPORATION
ON-LINE EXCHANGE FORM
FAX TELEPHONE
SERVICE CENTER TELEPHONE
www.fthgroupinc.com
1-626-333-2407
1-626-333-2435
The Fujitsu Ten Service Center may be contacted by phone, fax or e-mail. The Subaru![]()
Advance Exchange Fax Form is found in Subarunet, under Service, then Forms. The Service
Center is open from 7AM – 5PM Pacific Time. Exchange Units will be shipped to the dealer
via 2nd-day service.
SPECIAL NOTE: Audio/Navigation Unit SD (memory) cards must be returned along with
the complete unit itself for all exchange transactions made with Fujitsu Ten.
There may be some circumstances when only a SD (memory) card may need to be exchanged.
The complete process for this exchange measure is documented in Subaru
Service Bulletin
number 15-155-12.
ON-LINE EXCHANGE FORM
[email protected]
FUJITSU TEN
FAX TELEPHONE
1-800-438-5410
SERVICE CENTER TELEPHONE
1-800-237-5413
Note: In the event the vehicle is “New” and “In-stock”, indicate this on the exchange
form. A new unit will be supplied rather than an exchange unit.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 11
3) Kenwood or Fujitsu Ten will either ship an exchange unit or reject the request by the
next business day.
Upon acceptance of the Exchange Request, Kenwood or Fujitsu Ten will ship the exchange
unit directly to the dealer via second day air. Documentation shipped with the unit will include
an order number or an RMA Number (Kenwood) or an Exchange Number (Fujitsu Ten). It is
required that these numbers provided upon claim submission.
KENWOOD EXCHANGE NUMBER EXAMPLE... (RMA #)... 0000(0)
FUJITSU TEN EXCHANGE NUMBER EXAMPLE… 3YB000000 (First digit
denotes the claim year).
If the exchange is rejected, Kenwood or Fujitsu Ten will promptly notify the dealer of reason
for rejection. Kenwood or Fujitsu Ten may reject the request if the Exchange Request Form
has not been properly and legibly completed.
4) The dealer must return the failed component to Kenwood or Fujitsu Ten in the same
approved packaging that the exchange unit arrived in. A hard copy of the printout from
the on-line order or the Exchange Request Form must be included in the core return
package. Return freight charges may be claimed as sublet, provided the repair was per
formed under the terms of the Basic New Car Warranty. Copies of the freight invoice
should be attached to the repair order.
If replacement DVD(s) are supplied with the exchange, the original navigation DVD(s)s
must accompany the returned unit or a charge will be incurred.
Failure to use proper packaging could result in a “charge back” for the cost of the exchange
unit and shipping.
If the exchange component has not been installed or returned to Kenwood or Fujitsu Ten
within 30 days from the receipt of the exchange unit, the dealer will receive a “charge back”
for the cost of the exchange unit and shipping.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 12
ILLUSTRATION
DESCRIPTION
MANUFACTURER
PART NUMBER
Legacy / Outback
Type D
Navigation &
Audio Complete
Head Unit (AVN)
Fujitsu Ten
86271AJ67A
Tribeca
Navigation Unit
Kenwood
86271XA00A
Tribeca
Navigation
Display
Kenwood
86281XA05C
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 13
ILLUSTRATION
DESCRIPTION
MANUFACTURER
PART NUMBER
Fujitsu Ten
86271FG601
Navigation with SD
Card Exchange
Fujitsu Ten
86271FJ610
Navigation with SD
Card Exchange
BRZ Audio &
NavigationUnit
Assembly w/XM
built-in
Fujitsu Ten
86271FJ600
Navigation with SD
Card Exchange
Forester
Audio &
Navigation
Unit Assembly
w/ XM built-in
(Pre-production
prior to
6-1-12)
Fujitsu Ten
86271SC601
Navigation with SD
Card Exchange
Forester
Audio &
Navigation Unit
Assembly w/
XM built-in
(Production
vehicles after
5-31-12)
Fujitsu Ten
86271SC620
Navigation with SD
Card Exchange
Forester
Portable
Navigation
Device
Fujitsu Ten
H001SSC820
WRX / STi
Audio &
Navigation
Unit Assembly
w/ XM built-in
Impreza Audio
& Navigation
Unit Assembly
w/ XM built-in
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 14
8.4.9.4. RETURN OF LODGED CD/DVD(S)
In the event a DVD/ CD(s) becomes lodged in the In-Dash CD Changer, Rear Seat
Entertainment Unit or Navigation Assembly, do not disassemble the unit to retrieve the DVD/
CD(s). Please use the following procedure:
(1) F
ollow the normal exchange procedures for requesting a replacement unit. In the case of
Navigation DVDs, notify the manufacturer at the time the exchange unit is requested that
the DVD is lodged in the unit. A new DVD will be supplied with the exchange unit.
(2) F
or all DVD/CD(s) other than Navigation DVDs, record a daytime telephone number
where the customer can be reached and retain in customer’s file.
(3) R
emove the defective unit from the vehicle and return it to the manufacturer. DVD/
CD(s) that have been successfully removed by the manufacturer will be returned directly
to the dealer within 10 calendar days. It is the dealer’s responsibility to notify the customer when the DVD/CD(s) are returned.
In the event a DVD/CD(s) has been damaged (except Navigation DVDs); the manufacturer
will reimburse the customer through the dealer at $15.00 per damaged CD or $20.00 per
damaged DVD. Panasonic will forward a check for this reimbursement to the dealer. The
dealer must in turn reimburse the customer. Only commercially produced DVD/ CD(s) can be
included in the reimbursement program.
8.4.9.5. SATELLITE RADIO EXCHANGE PROGRAM
Within the terms of the Basic New Car Warranty, and the one year Replacement Part
Warranty, the Satellite Radio Exchange Program provides for replacement of a defective control module with an exchange module from the manufacturer. The manufacturer will supply
an exchange unit, or a new unit in the case of a “New” and “In-stock” vehicle.
Genuine Subaru
Satellite Radio Accessories are manufactured by Clarion. In the event the
control module requires an exchange, it is not necessary to remove the unit from the vehicle.
The procedures listed below should be followed:
(1) The defective module should remain in the vehicle until the exchange unit is installed.
(2) The Clarion Service Center should be contacted. The Service Center is open
from 8 AM - 6 PM Eastern Time:
CLARION
1-800-347-8933
Note: In the event the vehicle is “New” and “In-stock”, inform the Service Center. A new
unit will be supplied rather than an exchange unit. If the Service Center is unable to provide
a new unit, immediately contact a Subaru
of America, Inc. Dealer Claims Specialist at
1-866-SUBARU2 for further instructions.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 15
Vehicles that have been placed in demo service should use exchange units only.
Replacement of the control module with a new unit, other than units supplied through the
exchange program, requires authorization from Subaru
of America, Inc. Dealer Claims
Specialist. An authorization code will be provided and must be included upon claim
submission.
(3) Provide the Service Center with the following information:
Dealer Code
Dealer Name and Address
VIN - All 17 Characters
Vehicle Year
Vehicle Model
Date of Vehicle Sale
Vehicle Mileage
Subaru
Part Number
Customer Complaint
Customer Last Name
At this time, the Service Center will issue an exchange number. It is required that this number
be provided upon claim submission.
Clarion Exchange Number Example....(ERS#)... 0000000001
An exchange module along with an exchange form will be shipped within 72 hours. If the
exchange module is not received within 5 days, call the Service Center. Provide the operator
with the exchange number when making inquiries.
(4) Install the exchange unit as soon as possible upon receipt. Return the defective module to
the manufacturer within 30 days. Return freight charges may be claimed as sublet,
provided the repair was performed under the terms of the Basic New Car Warranty.
Copies of the freight invoice should be attached to the repair order.
If the exchange unit has not been installed or the failed module returned within 30 days,
contact the Service Center. Reference the exchange number and explain the circumstances
causing the delay. An extension will be granted or the dealer will be instructed to return the
exchange unit. Failure to comply will result in a “charge back” to the dealer for the cost of the
exchange unit.
Note: Activation of all subscription based services is the responsibility of the vehicle owner.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 16
ILLUSTRATION
DESCRIPTION
MANUFACTURER
PART NUMBER
Legacy / Outback
Sirius Satellite
Tuner Module
Clarion
H621SFG021
Forester /
WRX / STI
Sirius Satellite
Tuner Module
Clarion
H621SFG020
Legacy / Outback
/ Impreza /
Forester
XM Satellite
Tuner Module
Clarion
H621SXA120
Tribeca
XM Satellite
Tuner Module
Clarion
86241AJ01A
WRX / STI
Navigation
Satellite Tuner
Module
Clarion
86241FG001
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 17
8.4.9.6 POWER AMPLIFIER EXCHANGE PROGRAM
Within the terms of the Basic New Car Warranty and the one year Replacement Part Warranty,
the Satellite Radio Exchange Program provides for replacement of a defective control module
with an exchange module from the manufacturer. The manufacturer will supply an exchange
unit, or a new unit in the case of a “New” and “In-stock” vehicle.
Genuine Subaru
Satellite Radio Accessories are manufactured by Clarion. In the event the
control module requires an exchange, it is not necessary to remove the unit from the vehicle.
(1) The defective unit should remain in the vehicle until the exchange unit is installed.
(2) The applicable Service Center should be contacted. Harman Becker Service Center
is open from 8 AM to 8 PM Eastern Time.
Harman Becker
1-800-448-0944
(3) Provide the Service Center with the following information:
Dealer Code
Dealer Name and Address
VIN - All 17 Characters
Date of Vehicle Sale
Vehicle Mileage
Caller’s Name and Telephone Number
Claim Number
Chassis Model Number, ID Code and/or the Subaru
Part Number
Customer Complaint
Customer Last Name
At this time, the Service Center will issue an exchange number. It is required that this number
be provided upon claim submission.
Harman Becker Exchange Number Example…RA999999
An exchange unit along with an exchange form and return shipping label will be shipped
within 48 hours. If the exchange unit is not received within 5 days, call the Service Center.
Provide the operator with the exchange number when making inquiries.
(4) Install the exchange unit as soon as possible upon receipt. Return the defective unit to the
manufacturer within 30 days. All exchange units have return shipping labels included and
should be returned in the same packaging the exchange unit arrived in.
If the exchange unit has not been installed or the failed unit returned within 30 days, contact
the Service Center. Reference the exchange number and explain the circumstances causing the
delay. An extension will be granted or the dealer will be instructed to return the exchange unit.
Failure to comply will result in a “charge back” to the dealer for the cost of the exchange unit.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 18
ILLUSTRATION
DESCRIPTION
MANUFACTURER
PART NUMBER
Legacy Power
Amplifier
Assembly
(Base Models)
Harman Kardon
86221AJ20A
Legacy Power
Amplifier
Assembly
(Limited Models)
Harman Kardon
86221AJ21A
Tribeca Power
Amplifier
Assembly
(Limited and
Touring Models)
Harmon Kardon
86221XA20A
11.2.10 AUDIO COMPONENT OUT-OF-WARRANTY EXCHANGE / REPAIR
PROGRAM
Vehicles outside the terms of the New Car Basic or Parts Warranties may utilize the Audio
Exchange/Repair Program which is to be referenced as an “Out-of Warranty Exchange
Program”. Subaru
Added Security Gold Plus customers are entitled to this “out-of-warranty”
exchange program when the failure meets the terms of the Agreement.
The out-of-warranty exchange program is intended to enhance customer satisfaction by
providing a prompt exchange with a quality factory serviced audio unit which has been
refurbished to the highest standards.
All out-of-warranty orders will be subject to availability. In case of low stock, “in-warranty”
orders will take priority over “out-of-warranty” orders. In general, this program is for internal
failures and does not include exchanges for damage (spilled liquid, scratches, etc.) Speak with
the manufacturer to determine exchange eligibility.
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 19
Out of Warranty Exchange Program procedures are outlined below. Please have the following
information available when contacting the Service Center.
Dealer Code
Dealer Name and Address
VIN – All 17 Characters
Date of Vehicle Sale
Vehicle Mileage
Caller’s Name and Telephone Number
Claim Number
Chassis Model Number, ID Code and/or the Subaru
Part Number (Clarion requires
the front faceplate ID Number)
Customer Complaint
Customer Last Name
Clarion: 1-800-347-8933
•
•
•
•
•
•
•
•
The program includes 2002 and later model years based on availability
Exchange cores will be shipped UPS Ground within 72 hours.
Clarion offers a 1 year manufacturer’s warranty on these exchange units.
Clarion will invoice the dealer for the cost of the exchange unit.
Shipping charges for return of the core is the responsibility of the dealership.
Cores must be returned to Clarion within 30 days
Delinquent cores will be invoiced to SOA who in turn will issue a debit
to the dealership
There will be a restocking fee of 20% for all unused returned cores. Dealers will
be invoiced by Clarion and are to make payment directly to Clarion for this fee.
Panasonic: 1-800-228-0473
•
•
•
•
•
•
•
The program includes 2002 and later model years based on availability
Exchange cores will be shipped UPS Ground within 72 hours
Panasonic offers a 1 year manufacturer’s warranty on these exchange units.
Dealers will be invoiced by Panasonic for the cost of the exchange unit
Payments are to be made directly to Panasonic
Shipping charges for return of the core is the responsibility of the dealership
Cores must be returned to Panasonic within 30 days
continued...
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 20
Kenwood: 1-626-333-2435
NOTE: Kenwood does not offer an “Out of Warranty” exchange program; however, they do
offer an “Out of Warranty” repair program.
•
•
•
•
•
•
•
The Kenwood Service Center should be contacted preferably through
their web-site www.fthgroupinc.com
The dealer places the repair request with the Kenwood Service Center and pays
a minimum analysis and shipping fee.
The dealer removes the unit from the vehicle and sends it to the Kenwood
Service Center for repair.
The Kenwood Service Center analyzes the unit and informs the dealer of additional
repair costs. Repair costs will vary depending on the condition of the unit.
If the customer does not agree to additional costs, the unit is returned to the dealer
“as is” with no additional charges.
If the customer agrees to the repair, Kenwood invoices the dealer and payments are
to be made by the dealer directly to Kenwood.
The Kenwood Service Center repairs the unit and returns it to the dealer.
Bulletin Number: 15-157-12R; Date: 06/12/13
Page 21
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-157-12R
Replacement Service Bulletin Number:
MFR Communication Date: 2013-06-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW
, for Audi
, for GM, for Ford
and more. Note:D200 does‘t provide any OE software. - 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW
, for Audi
, for BMW
, for Benz, for Mitsubishi
and more. PMI function for Ford
/for Lincoln
/for Mazda
, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market. - 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA
Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars. - 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




