JTB00241NAS2 Service Bulletin/Repair Instructions

Page 1 of 4
TECHNICAL BULLETIN

JTB00241NAS2

25 OCT 2013

© Jaguar Land Rover North America, LLC

NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,

and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some

vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized

Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
This reissue replaces all previous versions. Please destroy all previous versions. Only refer to the

electronic version of this Technical Bulletin in TOPIx.
SECTION: 303-04
Engine Misfires / Engine MIL Illuminated

AFFECTED VEHICLE RANGE:

XF (X250)

Model Year:

VIN:
2010-2012

R47154-S61361
Engine:
V8 5.0L Petrol

V8 S/C 5.0L Petrol
XJ Range (X351)

Model Year:

2010-2012

VIN:

V00047-V39426

XK Range (X150)

Model Year:

2010 Onwards

VIN:

B32753 Onwards
MARKETS:

NAS
CONDITION SUMMARY:

Situation:
NOTE: This bulletin supersedes all previous versions; the Service Instructions have changed

significantly and are therefore not highlighted.

The engine may exhibit a misfire, poor fuel economy, hard starting, and / or a rough idle condition when the

engine is either cold or hot. The engine Malfunction Indicator Lamp (MIL) may also be illuminated with misfire

Diagnostic Trouble Codes (DTC) P0301 through P0308, depending on the affected cylinder(s), and P0316 stored

in the Engine Control Module (ECM).
Cause: This may be caused by incomplete combustion caused by poor fueling.
NOTE: The Service Instruction may only be completed if no other causes for the misfire are

identified after following SDD and TOPIx advice.
NOTE: The Service Instruction may only be completed if Diagnostic Trouble Code (DTC) P0316

and one or more misfire DTCs (P0301-P0308) is stored. If any other DTC is stored, investigate the

cause and carry out the appropriate repair as a separate claim.

Action: Should a customer express this concern, follow the appropriate Service Instruction (1, 2, and/or 3)

outlined below:
http://topix.jaguar.jlrint.com/topix/service/document/442372
10/28/2013
Page 2 of 4
• Service Instruction 1 - XK ONLY: vehicles exhibiting either a 'cold' or 'hot' engine misfire;

replace fuel injectors

• Service Instruction 2 - XF, XJ ONLY: only for vehicles exhibiting a 'hot' engine misfire; replace

fuel injectors

• Service Instruction 3 - XF, XJ ONLY: for all vehicles exhibiting either a 'cold' or 'hot' engine

misfire; update Engine Control Module (ECM) software
PARTS:

C2D24386
Fuel injector
Quantity: Up to 8 (as

required)
TOOLS:

NOTE: This document is an 'Active Bulletin' that will display a functional programming shortcut if

accessed within a diagnostic session using SDD.
SDD with latest DVD and Calibration File; first available on DVD135.03 v.147

Jaguar Land Rover-approved Midtronics battery power supply

Refer to Workshop Manual / Service Instruction for any required special tools
WARRANTY:

NOTE: Repair procedures are under constant review, and therefore times are subject to change;

those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair

time.

NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part

number with a quantity of zero.

DESCRIPTION
SRO
TIME

(HOURS)
CONDITION

CODE
CAUSAL

PART
0.3
42
C2D24386
Update Engine Control Module software - XF, XJ 86.99.13

Fuel rail/injector(s) - Right bank - Renew - XF

N/A
19.60.04
2.8
42
C2D24386
Fuel rail/injector(s) - Left bank - Renew - XF

N/A
19.60.05
2.1
42
C2D24386
Fuel rail/injector(s) - Both banks - Renew - XF

N/A
18.10.02
4.7
42
C2D24386
Fuel rail/injector(s) - Right bank - Renew - XF

SC
19.60.04
2.9
42
C2D24386
Fuel rail/injector(s) - Left bank - Renew - XF SC 19.60.05
2.0
42
C2D24386
Fuel rail/injector(s) - Both banks - Renew - XF

SC
18.10.02
4.6
42
C2D24386
Fuel rail/injector(s) - Right bank - Renew - XJ

N/A
19.60.04
3.5
42
C2D24386
Fuel rail/injector(s) - Left bank - Renew - XJ

N/A
19.60.05
1.9
42
C2D24386
Fuel rail/injector(s) - Both banks - Renew - XJ

N/A
18.10.02
4.9
42
C2D24386
Fuel rail/injector(s) - Right bank - Renew - XJ

SC
19.60.04
3.6
42
C2D24386
Fuel rail/injector(s) - Left bank - Renew - XJ SC 19.60.05
2.0
42
C2D24386
http://topix.jaguar.jlrint.com/topix/service/document/442372
10/28/2013
Page 3 of 4
Fuel rail/injector(s) - Both banks - Renew - XJ

SC
18.10.02
5.0
42
C2D24386
Fuel rail/injector(s) - Right/left bank - Renew XK N/A
19.60.04
2.6
42
C2D24386
Fuel rail/injector(s) - Both banks - Renew - XK

N/A
18.10.02
4.8
42
C2D24386
Fuel rail/injector(s) - Right/left bank - Renew XK SC
19.60.04
2.8
42
C2D24386
Fuel rail/injector(s) - Both banks - Renew - XK

SC
18.10.02
5.3
42
C2D24386
NOTE: Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION 1 - XK ONLY

NOTE: The Service Instruction may only be completed if Diagnostic Trouble Code (DTC) P0316 and

one or more misfire DTCs (P0301-P0308) is stored. If any other DTC is stored, investigate the cause and

carry out the appropriate repair; to be performed as a separate claim.
1. If Diagnostic Trouble Codes (DTC) P0316 and one or more misfire DTCs (P0301-P0308) is stored and no other

misfire cause is found, replace the affected fuel injector(s) as indicated by the DTC (see TOPIx Workshop

Manual, Section 303-04).

2. Read and clear all DTCs.

3. Start and run the engine until normal operating temperature is achieved.

4. Switch the engine 'OFF' and let stand for a minimum of six (6) hours.

5. Start and run the engine while monitoring for misfire symptoms.

 If no misfire symptoms are evident, return the vehicle to the customer.

 If misfire symptoms are evident, further diagnosis is required; to be performed as a separate claim.
SERVICE INSTRUCTION 2 - XF, XJ ONLY

NOTE: The Service Instruction may only be completed if Diagnostic Trouble Code (DTC) P0316 and

one or more misfire DTCs (P0301-P0308) is stored. If any other DTC is stored, investigate the cause and

carry out the appropriate repair; to be performed as a separate claim.
NOTE: If the Freeze frame data indicates a 'cold' engine misfire only, do not replace fuel injectors;

continue to Service Instruction 3.
1.
NOTE: A printed copy of the Freeze frame data, indicating engine coolant temperature at the

time of the engine misfire, must be kept in the vehicle record file.

View the Freeze frame data for Diagnostic Trouble Code (DTC) P0316 or one misfire DTC (P0301-P0308) and

read the engine coolant temperature.

 If the engine coolant temperature is 76ºC or higher ('hot' engine), continue to step 2.

 If the engine coolant temperature is 75ºC or lower ('cold' engine), continue to Service Instruction 3 below;
do not replace fuel injectors.

2. If Diagnostic Trouble Code (DTC) P0316 and one or more misfire DTCs (P0301-P0308) is stored and no other

misfire cause is found, replace the affected fuel injector(s) as indicated by the DTC (see TOPIx Workshop

Manual, Section 303-04).
http://topix.jaguar.jlrint.com/topix/service/document/442372
10/28/2013
Page 4 of 4
3. Continue to Service Instruction 3 below.
SERVICE INSTRUCTION 3 - XF, XJ ONLY

NOTE: The Service Instruction may only be completed if Diagnostic Trouble Code (DTC) P0316 and

one or more misfire DTCs (P0301-P0308) are stored. If any other DTC is stored, investigate the cause and

carry out the appropriate repair; to be performed as a separate claim.
1.
CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected

to the vehicle battery during SDD diagnosis / module programming.
NOTE: SDD must be loaded with DVD135.03 v.147 or later.

Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
NOTE: The Engine Control Module (ECM) may also be known as Powertrain Control Module (PCM).
2. Turn ignition 'ON' (engine not running).

3. Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new session.

4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data

collect sequence.

5. Select 'Diagnosis' from the Session Type screen.

6. Select the 'Selected Symptoms' tab, and then select one of the following:

 Powertrain - Engine system - Engine performance - Engine misfire or

 Electrical - Instruments - Warning lamps - Engine malfunction lamp - Lamp illuminated or

 Electrical - Instruments - Information and Message Centre - Message Display Area - Powertrain
7. Select 'continue'.
8.
NOTE: The Engine Control Module (ECM) may also be known as Powertrain Control Module

(PCM).

Select the 'Recommendations' tab, and then select 'Run' to perform the 'Configure existing module –

Powertrain control module' option.
9. Follow all on-screen instructions to complete this task.

10. Exit the current session.

11. Disconnect the SDD and the battery power supply from the vehicle.
http://topix.jaguar.jlrint.com/topix/service/document/442372
10/28/2013

SaleBestseller No. 1

OBD2 Scanner Diagnostic Tool XTOOL Anyscan A30M V2.0, 2026 Wireless Bidirectional Scan Tool with Free Updates, 26 Resets, All System for Android & iPhone, Crank Sensor Relearn, EPB, Throttle Relearn

Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
Portable Car Scanner with 26 Resets: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
Wide Compatibility CAN FD & FCA Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it.
Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.

SaleBestseller No. 2

XTOOL Anyscan A30D OBD2 Scanner Diagnostic Tool - Bidirectional Scan Tool Wireless - Lifetime Updates & 19 Resets Crank Sensor EPB Throttle Relearn - Full System Car Code Reader for iPhone & Android

Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first

SaleBestseller No. 3

XTOOL D7 Bidirectional Scan Tool: 2026 Ai-Assisted OBD2 Scanner Diagnostic Tool with 36+ Resets, Full System Car Scanner with EPB, Injector Test, Throttle, Crank Sensor Relearn, FCA, CANFD & DoIP

2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records.
Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues.
Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility

This product presentation was made with AAWP plugin.

Last update on 2026-05-11 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor