JTB00230NAS2 Service Bulletin/Repair Instructions

Page 1 of 12
TECHNICAL BULLETIN

JTB00230NAS2

28 JAN 2013

© Jaguar Land Rover North America, LLC

NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and

equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or

provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you

are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to

determine whether this bulletin applies to a specific vehicle.
This reissue replaces all previous versions. Please destroy all previous versions. Only refer to the electronic

version of this TSB in TOPIx.
SECTION: 307-05
Transmission Control Switch Module DTC Diagnostics

AFFECTED VEHICLE RANGE:

XF (X250)
XJ Range (X351)
XK Range (X150)
Model Year:
2009 Onwards
VIN:
R00001 Onwards
Model Year:
2010 Onwards
VIN:
V00001 Onwards
Model Year:
2010 Onwards
VIN:
B32753 Onwards
MARKETS:

NAS
CONDITION SUMMARY:

Situation:

The Transmission Control Switch (TCS) may fail to rise, fail to rotate out of Park (P), and/or fail to rotate between

gears. This bulletin is to aid in diagnosing of Diagnostic Trouble Codes (DTC) for the Transmission Control Switch (TCS)

module.
NOTE: The Transmission Control Switch (TCS) may also be referred to as:

• Electronic Transmission Switch (ETS)

• Gear Selector Module (GSM)

• JaguarDrive Selector

• Transmission Range Selector (TRS)

• Transmission Rotary Switch (TRS)

• Transmission Shift Module (TSM)
NOTE: Use the table below to assist with the diagnosing of the various Diagnostic Trouble Codes

(DTC).
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 2 of 12
NOTE: Repairs to be carried out as a separate claim.
Cause: These may be caused by various issues which make the TCS fail to operate.

Action: In the event of a customer concern of the above, refer to the Diagnostic Procedure outlined below.
PARTS:

No Parts Required
TOOLS:

IDS with latest IDS-DVD and Calibration File

Jaguar Land Rover-approved Midtronics Vehicle Power Supply
WARRANTY:
NOTE: Repairs to be carried out as a separate claim.
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those

quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.

NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part

number with a quantity of zero.

DESCRIPTION
SRO
TIME

(HOURS)
CONDITION

CODE
CAUSAL

PART
Transmission Control Switch Module - DTC

Diagnostics - XF
10.10.99
0.20
42
C2Z22516
Transmission Control Switch Module - DTC

Diagnostics - XJ
10.10.99
0.20
42
C2D17959
Transmission Control Switch Module - DTC

Diagnostics - XK
10.10.99
0.20
42
C2P20671
NOTE: Normal Warranty policies and procedures apply.
DIAGNOSTIC PROCEDURE:

Use the Diagnostic Trouble Codes (DTC) table below for the Transmission Control Switch (TCS) module fault diagnosis.
NOTE: 'X' = DO NOT REPLACE TCS module - Perform the diagnostics specified in SDD/TOPIx Workshop

Manual section 100-00 Diagnostics.
NOTE: 'Y' = Replace the TCS module.
NOTE: '0' = Step 1: Perform diagnostics specified in SDD/TOPIx Workshop Manual section 100-00

Diagnostics. Step 2: clear all DTCs; cycle the ignition; engage Drive (D); return to the Park (P) position; test

with SDD. Step 3: If Steps 1 and 2 do not resolve issue, replace TCS module.

Diagnostic

Trouble Code

(DTC)
Transmission Control

Switch (TCS) Module Intermittent DTC
Transmission Control Transmission Control Transmission Control

Switch (TCS) Module Module (TCM) Module (TCM) Permanent DTC

Intermittent DTC

Permanent DTC
P176A-01
X
Y
X
X
P176A-13
X
Y
X
X
P176A-19
X
Y
X
X
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 3 of 12
P176A-94
X
Y
X
X
P176C-07
X
0
X
X
P176C-11
X
Y
X
X
P176C-12
X
Y
X
X
P176B-71
X
Y
X
X
P176C-73
X
0
X
X
B1087-87
X
X
X
0
U101B-87
X
X
X
0
P0814-01
X
Y
X
X
P0850-02
X
X
X
X
P1707-07
X
X
X
X
P1707-77
X
X
X
X
P1707-72
X
X
X
X
P0606-47
X
X
X
X
P0919-93
X
X
X
X
C1B00-68
X
X
X
X
P0850-29
X
X
X
X
P081C-64
X
X
X
X
The following DTCs may be generated by Brake Pedal pressure or Brake Pedal Switch DTCs. Follow the Diagnostic Procedure

below for Brake Pedal Switch/Brake Pedal Pressure Diagnostics.
NOTE: The Diagnostic Procedure below does not apply to XF vehicles built prior to VIN R47154.
NOTE: X = DO NOT REPLACE TCS Module- Perform the diagnostics specified in SDD/TOPIx Workshop

Manual Section 100-00 Diagnostics.

Diagnostic

Transmission Control

Transmission Control Transmission Control Transmission Control

Trouble Codes Switch (TCS) Module - Switch (TCS) Module Module (TCM) Module (TCM) Intermittent DTC

Permanent DTC

(DTC)

Intermittent DTC

Permanent DTC

C1D15-64
X
X
X
X
P1571-64
X
X
X
X
P0571-68
X
X
X
X
P0504-62
X
X
X
X
1.
CAUTION: Ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform these

steps may cause damage to control modules in the vehicle.
CAUTION: A Jaguar Land Rover-approved Midtronics Vehicle Power Supply must be connected to the

vehicle battery during IDS/SDD diagnosis / module programming.

Connect a Jaguar Land Rover-approved power supply to the vehicle.

2. Turn the ignition 'ON' (engine not running).

3. Connect the Integrated Diagnostics System (IDS) to the vehicle and begin a new Symptom Driven Diagnostics (SDD)

session.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 4 of 12
4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.

5. From the Session Type selection screen, select ‘Measurement Applications’.

6. Select the ‘Recommendations’ tab.

7. From the Recommendations tab run ‘Complete data logger’.

8. Select / expand the '206-00 Brake system' tab.
9. Select 'Brake fluid hydraulic pressure' and click on the icon (1) shown.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 5 of 12
10. Expand Engine system.

 Select 'Engine input/output parameter - Brake switch 2' then click on the icon shown (2).
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 6 of 12
11. Select 'Engine input/output parameter - Brake switch' (1) then click on the icon shown (2).
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 7 of 12
12. Click on the icon shown.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 8 of 12
13. Click on the icon shown.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 9 of 12
14. Press the brake pedal.

 The first graph to change must be the brake light switch (confirm by asking someone to watch brake lights come
on). The brake pressure applied, shown in the top bar chart, should be between 1 and 7 BAR.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 10 of 12
15. The next graph to change should be the cruise cancel switch.

 The brake pressure applied, shown in the top bar chart, should be between 4.5 and 14 BAR.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 11 of 12
16. Last graph to move should be brake pressure.

 This reading will vary depending on whether the engine is running and foot pressure applied.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013
Page 12 of 12
17. Switch the data logger off before disconnecting the SDD from the vehicle.

 If the results show that the brake pedal switch is working as expected do not replace the switch. It will be
necessary to investigate the cause of the issue. Contact the Technical HelpLine for additional support if

necessary.

 If the results show that the brake switch is not working correctly, remove the brake pedal switch and refit.

 Run the above tests again.

 If the results still show the brake switch is not working correctly the switch should be replaced.

18. Exit the current session.

19. Disconnect the IDS and the battery conditioner/power supply from the vehicle.
http://topix.jaguar.jlrint.com/topix/service/document/230758
2/4/2013

SaleBestseller No. 1

OTOFIX D1 Lite 2026 Bidirectional Scan Tool, Bluetooth OBD2 Scanner Diagnostic Tool, 2 Years Free Update, 38+ Services, CANFD & DoIP Protocols, All System Diagnoses, ABS Bleeding, Auto VIN

🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered.
🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.

Bestseller No. 2

OTOFIX D1 Lite Bidirectional Scan Tool with 2-Year Free Updates, 2026 New All System Automotive Diagnostic Scanner, 38+ Reset Services, FCA AutoAuth, Active Test, CANFD&DOIP, Auto VIN

🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.

SaleBestseller No. 3

OTOFIX D1 Lite 2026 Bidirectional Scan Tool, 2 Years Free Update, 38+ Services, All System Diagnostic Scanner, Active Tests, AutoAuth FCA SGW, AutoVIN, CAN FD & DoIP, 99% Car Coverage

【2026 OTOFIX D1 Lite Gives the Best Value for Money】OTOFIX D1 Lite bidirectional scan tool is more FASTER and SMARTER with 2026 Enhanced Hardwares & New Functions! 👍Alternative Bluetooth +USB connect 👍2G+64GB 👍4x ARM Cortex-A35 (1.5GHz) Processor (5X Faster CPU) 👍Android 9.0 OS 👍5G GHz WiFi 👍CANFD&DOIP 👍 FCA AutoAuth 👍38+ Services 👍3K+ Bi-Directional Control 👍Full Systems Diagnose 👍2 Years Update 👍150+ Vehicle Coverage.
👍【Active Tests】 OTOFIX D1 Lite is a bi-directional scan tool that can send commands to, and also receive information from vehicle control modules. This way, you can quickly locate and repair faulty auto parts. For Example: send direct commands to ask the vehicle to turn on/off the radiator fan, lights, sound horn, fuel pump, modulate throttle, open/close windows, operate mirrors and more. *Note that only available tests will be displayed in the menu.
👍【38+ Service Functions】 OTOFIX D1 Lite scan tool offers 38+ of the hottest service functions that are commonly used for car repairs. That include Oil reset/SAS/EPB/BMS/Throttle/ABS bleeding, and 2065-new SUS/ADBLUE/NOX/Headlamp resets (and more) to help restore your car status after repairs are done. Compared to other diagnostic scanners for cars, the OTOFIX D1 Lite scanner is much more fully-featured. *Note that specific functions available depend on the make/model/year of your car.
👍【All System Diagnostics + Cloud Report Management】 This 2026 car scanner OTOFIX D1 Lite provides troubleshooting and data for all ECUs: read/clear DTCs, view graphic live data/VIN, and locate system faults for safe driving. With Cloud Report Management, you can save detailed reports to cloud servers and easily shared them with others via QR codes/emails/text messages. Others can access these reports from any device (smartphones/tablets/PCs …) anytime, and you can better manage repair work.
👍【99% Car Coverage】 This one-station car scanner diagnostic for all cars works on 150+ major car brands across the world. 1) It supports CAN-FD/DoIP protocols: compatible with GMCAVALIER/TRAX/Encore/Envision/GL8(LSY)/CT4/CT5 after 2019; Volvo after 2018; Land Rover/Jaguar after 2017; and BM.W F/G all chassis. 2) For models equipped with security modules (such as Renault & 2018+ FCA SGW), its built-in AutoAuth allows you to easily break diagnostic barriers after registration.

This product presentation was made with AAWP plugin.

Last update on 2026-05-11 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor