NUMBER

GROUP

HyunDRI I

nEWTHlnKlnG.
nEW POSSIBILITIES.

Technical Service Bulletin

13-01-015

CAMPAIGN

DATE

MODEL

MARCH 2013

TUCSON (LM)

TUCSON (LM) ECM & TCM UPDATE (SERVICE CAMPAIGN TM9)

Description: This bulletin provides a procedure to update the ECM and TCM software for 2013
Tucson (LM) 2.4L vehicles to revise the shift feeling in ECO mode.
This TSB supersedes TSB 12-01-042 to include retail vehicles.

*IMPORTANT ***DEALER STOCK AND RETAIL VEHICLES***
Dealers must perform this Campaign on all affected vehicles prior to customer retail delivery and
whenever an affected vehicle is in the shop for any maintenance or repair.
When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty
Vehicle Information" screen via WEBDCS to identify open Campaigns.
Applicable Vehicles: 2013 MY Tucson (LM) 2.4L with automatic transaxles
Applicable Production Date Range: From May 24, 2012 through October 4, 2012
GOS INFORMATION:
Event #
Description
EVENT #286 286.13MY LM 2.4 ACTIVE ECO ACCELERATION LOGIC IMPROVEMENT - ECM
EVENT #287 287.13MY LM 2.4 ACTIVE ECO ACCELERATION LOGIC IMPROVEMENT - TCM
WARRANTY INFORMATION:

NOTE: Submit claim on Campaign Claim Entry Screen
ECM ROM ID TABLE: Verify the ECM ROM ID before updating vehicle software.
MODEL

TUCSON (LM)
2.4L

1!!1111!11111111!!1!!11111!1

Evivi t-'AK 1
NUMBER

EMISSION

39106-2G803

ULEV

KEY

39106-2G813

ULEV

39106-2G823
39106-2G883

IGNITION

IMMO

CvlVI l"'\.UIVI IU

PREVIOUS

NEW

NO

LDC4MSOA

LDC4MTOB

SSB

YES

LDC4RSOA

LDC4RTOB

SU LEV

KEY

NO

LDS4MSOA
LDS4MTOA

LDS4MTOB

SU LEV

SSB

YES

LDS4RSOA
LDS4RTOA

LDS4RTOB

Circulate To: Service Manager, Warranty Manager, Service Advisors, Technicians, Fleet Repair

SUBJECT:

TUCSON (LM) ECM & TCM UPDATE (SERVICE CAMPAIGN TM9)

TCM ROM ID TABLE: Verify the TCM ROM ID before updating vehicle software.
MODEL

PCM (TCM) PART
NUMBER

TCM ROM ID
PREVIOUS

NEW

TLMOC24NA6
TLMOC24NA7

TLMOC24N10

39106-2G803
TUCSON (LM)
2.4L

39106-2G813
39106-2G823
39106-2G883

GENERAL PRECAUTIONS
•
•

Connect the USB cable between the GOS and
the VCI.
Connect the 16-pin DLC connector from the VCI
into the DLC located under the driver's side
dash.

*NOTE
Make sure the battery icon at the bottom right of the GOS laptop shows at
least 50%; if not, charge the GOS or attach a battery charger.
•

Turn off all lights (Do not leave the headlight switch in auto mode) and all accessories (including
heater/air conditioner/fan , audio, heated seats , rear defroster, etc) to ensure the battery will not
be discharged during the update.

•

Perform the update with the ignition key in the ON position . (Turn the ignition key to the ON
position or press the Start-Stop Button two times without depressing the brake pedal) .

•

Do not disconnect any cables connected to the vehicle or the GOS during the update.

•

Do not start the engine or turn the ignition switch OFF during the update.

*NOTE
Confirm your GOS has the most recent version. If not, connect the GOS to an
Internet port, open the GOS home page and select "Update".
If you encounter GOS related problems, call the GIT Helpline at 888-437-0308.

TSB # : 13-01-015

Page 2 of 6

TUCSON (LM) ECM & TCM UPDATE (SERVICE CAMPAIGN TM9)
ECM UPDATE
GOS AUTO MODE ECM UPDATE PROCEDURE
1. From the GOS home page, select ECU Upgrade. If necessary, select the VIN .
2. Select Engine as the system and then select OK.
3. Select Auto Mode and then select Next.
4.

From the System tab , select Engine and then select OK. The GOS will read the ROM ID.
Confirm the ROM is applicable as shown on Page 1, "ECM ROM ID Information".
NOTE: Record the ROM ID in case the auto update fails and a manual update is needed.

5. Update event 286.13MY LM 2.4 ACTIVE ECO ACCELERATION LOGIC IMPROVEMENT- ECM
will display. Select Upgrade.

•

•Mode
Auto Mode

•System

Event Group

Event List

• Cu rrent ROM ID

ILDS4RTOA

• L atest ROM ID

ILDS4RTOB

-

28613MY LM 24 ACTIVE ECO ACCELERA110r; LOGIC IMPROVEMEtJT-ECM

]

ENGINE

f D Event selection

-

1. Review and understand re lated TSB for vehicle reprogramming .
2. Select reprogramming event from Upgrade Event pull do wn menu above .
3. Click the Upgrade button to begin ECU upgrade .

ID Register
Option Treatment
Data Treatment
Inspection I Test

ECU Mapping Verification1
~

~

case Analysis

OTC

Current Data

Ac¥:s'!°°

Flight RectHd

OVOM

~

~

Osc111oswpe

Slmr~::ion

6. If the screen indicates "Voltage is OK", select OK. If not, select CANCEL and charge the
vehicle battery by running the engine for 10 minutes .
7. Updating will occur until 100% is reached on the bar graph. At the prompt, turn the ignition key
OFF for 10 seconds, then turn it ON and select OK.
8. The GOS will confirm that ECM reprogramming is successfully finished . Select OK.
9. If the ECM update was not successful , go to GOS MANUAL MODE ECM UPDATE
PROCEDURE.
10. Check for Diagnostic Trouble Codes and erase any OTC.
11. Start the engine to confirm proper operation .

TSB #: 13-01-015

Page 3 of 6

TUCSON (LM) ECM & TCM UPDATE (SERVICE CAMPAIGN TM9)

SUBJECT:

GOS MANUAL MODE ECM UPDATE PROCEDURE

*NOTE
In the event of AUTO MODE update failure (after it initiated the progress bar):
• You must attempt MANUAL MODE. Use the ECM P/N from the vehicle's ECM label if
the correct ECM P/N is not clear from the ROM ID table.
• Replacing an ECM without carefully documenting that a MANUAL MODE update
attempt was made will result in a charge back of your claim.
1. From the GOS home page, select ECU Upgrade. If necessary, select the VIN .
2. Select Engine as the system and then select OK.
3. Select Manual Mode and then select NEXT.
4. From the System tab , select Engine and then select NEXT.
5. Update event 286.LM 2.4 ACTIVE ECO ACCELERATION LOGIC IMPROVEMENT - ECM will
display. Select Next.
6. Select the correct ROM according to ECM part number on the ECM label. Select Upgrade.

' Mode

~ Cu rrent ROM ID
~

ManuaJ MoiH

Latest ROM ID

ILDV