NHTSA ID Number: 10056417
Manufacturer Communication Number: LTB-00644NAS-1
TSB/Document Date: 2014-11-26
Summary
LAND ROVER
: DUE TO CORRODED CHASSIS WIRING HARNESS ON LEFT REAR SIDE OF CHASSIS-TO-BODY CONNECTOR, MULTIPLE WARNING LIGHTS ARE DISPLAYED IN THE INSTRUMENT CLUSTER. MODEL 2005-2009 LR3 (LA), 2006-2013 RANGE ROVER SPORT (LS), 2010-2013 LR4 (LA). *PE
Page 1 of 6
TECHNICAL BULLETIN
LTB00644NAS1
09 MAY 2014
SB-10056417-1282
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land
Rover service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 418-02
Rear Left-Side Chassis-to-Body Harness Connector Protective Sleeve
AFFECTED VEHICLE RANGE:
LR3 (LA)
Model Year:
VIN:
2005-2009
5A000259-9A513325
LR4 (LA)
Model Year:
VIN:
2010-2013
AA510178-DA699716
Range Rover Sport (LS)
Model Year:
2006-2013
VIN:
6A900129-DA814822
MARKETS:
NAS
CONDITION SUMMARY:
Situation: Multiple warning lights may be displayed on the Instrument Cluster.
Cause: This may be caused by corroded chassis wiring harness at the rear left-side chassis-to-body connector.
Action: Should a customer express this concern, follow the Service Instruction outlined below.
PARTS:
LR059307
Protective sleeve
Quantity: 1
Cable ties, locally sourced
Quantity: 2
TOOLS:
Refer to Workshop Manual for any required special tools.
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change;
those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair
time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Protective sleeve - Rear left-side chassis-to-body
connector - Install - LR3 / LR4 (L319)
86.71.89.52
0.5
42
LR029833
Protective sleeve - Rear left-side chassis-to-body
connector - Install - Range Rover Sport (L320)
86.71.89.52
0.5
42
LR030129
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
Page 2 of 6
NOTE: Normal Warranty policies and procedures apply.
SERVICE INSTRUCTION:
NOTE: Prior to performing the Service Instruction, any corroded or damaged wires in the connector
block must be repaired using the harness repair kit prior to performing the Service Instruction (see TOPIx
Workshop Manual, section 418-02, for additional information on harness repair); to be performed out as a
separate claim.
1. Remove the spare wheel and tire (see Owner's Handbook).
2. Raise and support the vehicle (see TOPIx Workshop Manual, section 100-02).
3. Remove the rear left wheel and tire (see TOPIx Workshop Manual, section 204-04).
4. Disconnect the battery (see TOPIx Workshop Manual, section 414-00).
5. Using a suitable trim lever, remove the cover.
6. Disconnect the rear left-side chassis-to-body
connector.
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
Page 3 of 6
7. Install the protective cover onto the wiring harness.
8. Connect the rear left-side chassis-to-body
connector.
9.
NOTE: Make sure the connector is
secured.
NOTE: Make sure the cable tie is tightened
over the insulated part of the harness.
Secure the end of the protective cover with a cable
tie as shown.
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
Page 4 of 6
10.
NOTE: Make sure the cable tie is
tightened over the insulated part of the
harness.
Secure the end of the protective cover with a cable
tie as shown.
11. Expose the connector securing fir tree clips
through the protective cover.
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
Page 5 of 6
12. Install the cover.
13. Install the connector into the cover.
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
Page 6 of 6
14. Install the rear left wheel and tire. (see TOPIx Workshop Manual, section 204-04).
15. Lower the vehicle.
16. Install the spare wheel and tire (see Owner's Handbook).
17. Connect the battery (see TOPIx Workshop Manual, section 414-00).
http://topix.landrover.jlrint.com/topix/service/document/476610
6/3/2014
- The package includes: (1008 pieces /63 sets, including...
- Product material: the connector is made of high-strength...
- Performance: Easy installation under welding and crimping...
- Convenient installation: the buckle design ensures that the...
- Widely used: suitable for motorcycles, trucks, ships...
Last update on 2026-05-22 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB-00644NAS-1
Replacement Service Bulletin Number:
MFR Communication Date: 2014-05-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:WIRING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.