NHTSA ID Number: 10045440
Manufacturer Communication Number: TSB-94-12-73
TSB/Document Date: 2012-09-06
Summary
AUDI
: UPDATED INFORMATION REGARDING THE OXIDATION IN THE INNER LED TAIL LIGHTS,THAT MAY DEVELOP, CAUSING MALFUNCTIONS OF THE INNER, NOT OUTER, TAIL LIGHT. *PE
SB-10045440-7757
Technical Service Bulletin
94F6 UPDATE – Tail Lamp Seal (NVLW)
94 12 73 2029196/1 April 16, 2012.
Model(s)
Year
2009
Audi
A4
2010
VIN Range
Vehicle-Specific Equipment
039416 – 039416
100021 – 100021
Not Applicable
000244 – 169782
Condition
This Update has been proactively released to prevent the following condition from occurring in the vehicle:
The contacts of the inner LED tail lights may develop oxidation which may cause malfunctions of the inner LED tail
light. The outer tail lights are not affected and still function properly.
This Update is in effect until removed.
Vehicle must meet all of the following criteria:
• Procedure is valid only for vehicles that show the 94F6 code in the ElsaWeb Campaign/Action Information
screen on the day of repair.
• Vehicle must be within the New Vehicle Limited Warranty.
• Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.
• Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
Technical Background
On Audi
A4 vehicles with LED tail lights manufactured within a specific period, it is possible that oxidation can
occur on the contacts of the inner LED tail lights due to environmental factors. This can lead to malfunctions. The
outer tail lights are not affected and still function properly.
Production Solution
The seals on the inner tail light assemblies must be replaced on the affected vehicles.
© 2012 Audi
of America, Inc.
Page 1 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Service
1. Replace seals for inner tail
light assemblies (left and
right sides).
Figure 1. Tail light.
Tip: To remove the old seals, warm gently with a hot air blower. Use the lowest setting, as
excessive heat causes the tail light assemblies to deform.
© 2012 Audi
of America, Inc.
Page 2 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Update Time
Requirements/
Reimbursement
To ensure prompt and proper payment, be sure to immediately enter the applicable
reimbursement code listed below upon completion of the repair work. Claims will be
paid only for vehicles that show the 94F6 code in the ElsaWeb Campaign/Action
Information screen on the day of repair.
94F6 Saga Claim Entry Procedure
Check ElsaWeb to determine whether Update 94F6 is open.
Service No.: 94F6
Damage Code: 0099
Parts Manufacturer - Removed part: 002
Claim Type
Sold vehicle = 7 10
Unsold vehicle = 7 90
Saga Accounting Instructions
Criteria ID
Repair operation
Labor Operation Number
TU
LS
Replace seal for inner tail light
assembly (left side)
9439 5599
20 TU
RS
Replace seal for inner tail light
assembly (right side)
9439 5599
20 TU
Part Number
Part Description
Quantity
8K5 998 191
Parts Kit – seal
1
© 2012 Audi
of America, Inc.
Page 3 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
There is no reimbursement for vehicle wash or loaner vehicle.
If the vehicle is outside of the specified warranty period, the customer has the option to pay for the repair.
If the customer agrees to pay for the repair:
Fax the information to (248) 754-5093 and provide VIN, applicable Service Number, Customer Info, Dealer
Number and Date.
If the customer does not agree to pay for the repair:
Fax the information to (248) 754-5093 and provide VIN, applicable Service Number, Customer Info, Dealer
Number and Date.
Additional Actions Some of the affected vehicles may be involved in additional Actions.
Please check your ElsaWeb Campaign/Action Information screen so that
any additional required work can be done simultaneously.
Update
Verification
For verification, always check the ElsaWeb Campaign/Action Information
screen. The ElsaWeb system is the only binding inquiry and verification
system; other systems are not valid and may result in non-payment of a
claim.
Help for Claim
Input
For questions regarding claim input, contact the Warranty Helpline.
Required
Customer
Notification
Inform your customer in writing by recording on the Repair Order any and
all work that was conducted on the vehicle, including any and all updates
completed under this Update.
© 2012 Audi
of America, Inc.
Page 4 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
Technical Service Bulletin
Required Parts and Tools
Part Number
Part Description
Quantity
8K5 998 191
Parts Kit – seal
1
• Properly destroy and dispose of removed parts in accordance with all state and local requirements, unless
otherwise indicated and/or requested through SAGA.
• If you have exhausted your allocated parts and you require additional parts for vehicles affected by this Update
but have exceeded your Upper Order Limit, please submit your requests for additional parts via email to
upperorderlimits@audi
.com. Be sure to include the affected VINs with your order. Prior to submitting your
request, ensure that each vehicle has the 94F6 code open in ElsaWeb. Your order will be reviewed and
processed accordingly.
Additional Information
All parts and service references provided in this Update are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.
© 2012 Audi
of America, Inc.
Page 5 of 5
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.
- 【Looking for More Professional Vehicle Scan...
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E...
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E...
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is...
- 【118+ Real Time Record & Live Graph View】iCarsoft E...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSB-94-12-73
Replacement Service Bulletin Number:
MFR Communication Date: 2012-04-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EXTERIOR LIGHTING:TAIL LIGHTS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store.



