NHTSA ID Number: 10044123
Manufacturer Communication Number: FC-390120003.01
TSB/Document Date: 2012-05-14
Summary
FISKER
: WITHOUT REPLACING THE ECU, THE ECU SOFTWARE IS ALLOWED, BY THE FLASH REPROGRAMMING, TO BE UPDATED. *PE UPDATED 5/14/2012. *PE
latest available information.
Page: 5 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
CIU – Navigation Patch
ECU
PIM GEN – Aux
Insert Step 1 Flash drive into center console USB port
SBL
GEN_SBL_0304_01_00.zip
SBL
CIU_SBL_002A_00_00.zip
APP
GEN_AUX_0302_01_02.zip
APP
CIU_APP_0021_05_08.zip
CAL
CAL
CIU_DSC_Navigation_11_12_05.dsc.hex
CIU - Software Update
ECU
PIM GEN – Master
Insert Step 2 Flash drive into center console USB port
SBL
GEN_SBL_0304_01_00.zip
SBL
CIU_SBL_002A_00_00.zip
APP
GEN_APP_0301_06_06.zip
APP
CIU_APP_0021_05_08.zip
CAL
CAL
CIU_CAL_002B_00_00.dsc.hex
ECU
Touch Panel Interface
SBL
TPI_SBL_0032_00_00.zip
APP
TPI_APP_0031_01_11.zip
CAL
ECU
PIM TIM1 – Aux
SBL
TM1_SBL_0284_01_00.zip
APP
TM1_AUX_0282_01_02.zip
CAL
ECU
PIM TIM1 – Master
SBL
TM2_SBL_0284_01_00.zip
APP
TM2_APP_0281_06_06.zip
CAL
ECU
PIM TIM2 – Aux
SBL
TM2_SBL_0294_01_00.zip
APP
TM2_AUX_0292_01_02.zip
CAL
ECU
PIM TIM2 – Master
SBL
TM2_SBL_0294_01_00.zip
APP
TM2_APP_0291_06_06.zip
CAL
NOTE: When flashing PIM TM1, PIM TM2,
and PIM GEN; the Aux files must be flashed
before the Master files are flashed.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 6 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
Preparing the Vehicle for ECU Flash Reprogramming
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing an ECU.
2a. Disconnect the vehicle from the High Voltage wall charger
2b. Verify the vehicle’s 12 volt battery is at or above 12.2 volts before proceeding.
– If the low-voltage Battery is not at least 12.2 volts, you must charge battery. Connect the
positive lead of the Midtronics MDX series tester (or equivalent) to the B+ positive post at the
Power Distribution Center (PDC) with Fisker Special Tool FST9001 – Battery Charging Terminal Adaptor (to be used for all electrical system testing and charging). Connect the – Negative lead to the Accessory Power Module (APM) ground terminal.
FST9001 - Battery Charging Terminal Adaptor (red arrow) installed on the B+ post in the PDC.
Negative chassis ground (red arrow) location on Accessory Power Module (APM).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 7 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing.
2c. Before ECU flash reprogramming can be started; the vehicle must be in the ACC – Accessory
mode.
– With the vehicle completely off, press the SSB – Start/Stop Button once. The SSB
backlighting will turn amber and the DIS will display “ACC.”
2d. When the ECU is being reprogrammed; the vehicle must be prevented from going into Sleep
mode. This can be accomplished simply by turning on the Hazard Warning Lights.
NOTE: If the vehicle goes into sleep mode while the ECU is being reprogrammed; the reprogramming
may be unsuccessful and can potentially damage the ECU.
Connecting the Fisker Scan Tool and Download BL613_2 Diagnostic Package
3a. Connect the WDI to the Data Link Connector (DLC) located underneath the Driver’s side dash.
Then connect the WDI to the Fisker laptop with the provided USB cable.
NOTE: The laptop will automatically install the drivers needed. Please wait for this to finish before
continuing.
NOTE: It is highly recommended to use the USB when flash reprogramming the ECU. It is faster and
more reliable than using the Bluetooth connection.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 8 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
3b. Before ECU flash reprogramming, ensure your laptop is updated with the latest diagnostic data
package/ECU software.
3c. Open the FiskerWT software. Update by clicking the “Add New Diagnostic Package” Icon from
the main screen.
3d. Press the “Download ODX” Button to download Version 613_2. This will open a window
showing the download progress. Please wait until the download is complete before continuing.
3e. Next press the “Download Descriptors” button. After the dialog box dismisses, a number of
deliverables should be shown on the left side.
3f. Select the descriptor that you want to install and select the “Download” button. This will open a
window showing the download progress. Please wait until the download is complete before
continuing.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 9 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
3g. After the download of the descriptor is complete, select the “Install” button or double click on the
deliverable. As a result, the deliverable will be shown on the right hand side, indicating it is installed
to the laptop.
NOTE: It is recommended to perform this update procedure constantly as new diagnostic packages will
be released frequently. Completing this procedure before using the Fisker scan tool ensures that you
have the latest data available.
3h. Select Back Action to return to the main menu once the update is complete.
3i. Select “user, default” to move on to the MDI Configuration screen.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 10 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
3j. Select WDI (Connection Type - USB) by clicking on it once. When the gray box turns green, the
WDI is ready to use.
NOTE: There may be new firmware to install depending on when you have last connected. By selecting
the WDI connected via the USB cable, any new firmware will install automatically. When the installation
is complete, the MDI selection menu will refresh automatically.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 11 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
3k. With a WDI selected, click on “Next Action” to move to the VIN Entry Screen. Enter the vehicle
information to continue.
Touch Panel Interface Flash Reprogramming (Baseline 613_2)
4a. After opening FiskerWT and entering the vehicle information; select Flash Application Lite in
the System Navigation menu.
4b. Click once to highlight “Flash Application Lite” and then click on “Next” in the bottom right hand
corner to continue.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 12 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
NOTE: Not all ECUs will have updates in a baseline release. Consult the latest Baseline Release Guide
to find the latest software available for an ECU.
4c. In the next screen, select the following from the drop down menus:
ECU
SBL
APP
CAL
Driver Information System
DIS_SBL_0044_00_00.zip
DIS_APP_0041_01_33.zip
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 13 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
WARNING!
DO NOT ALLOW LAPTOP TO GO INTO SLEEP OR SCREENSAVER MODE DURING THIS PROCESS.
TURN OFF SCREEN SAVER IF NECESSARY AND ENSURE PC STAYS AWAKE. LAPTOP MUST
BE PLUGGED INTO AC SOURCE DURING THIS PROCESS.
4d. Once the correct files to flash the TPI to Baseline 613_2 have been selected; Press the “Start
Flash” button to begin.
– The scan tool will now begin to flash the DIS. In the message box, you will be alerted to the
status of the flash.
Example: “Prepare vehicle for flash…” and “Starting flash…”
NOTE: The Touch Panel Interface screen will go blank while it is being flashed. Once the flash has been
completed successfully, the screen will return.
WARNING!
DO NOT DISTURB THE VEHICLE OR INTERRUPT THE CONNECTION BETWEEN THE SCAN TOOL
AND THE VEHICLE ONCE FLASHING HAS STARTED.
THE PROGRESS BAR MAY LOOK FROZEN – THIS IS NORMAL. IF THERE IS A PROBLEM YOU
WILL BE ALERTED THAT THE FLASH HAS BEEN UNSUCCESSFUL.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 14 of 25
Printed: January 20, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120003.01
MODEL: Karma
DATE: January 20, 2012
MODEL YEAR: 2012
TITLE: Baseline 613 Release Overview
NOTE: The DIS should take approximately 20-25 minutes to flash.
4e. When the ECU flash reprogramming has finished; you will be prompted with a message similar
to:
“Flashing of [ECU_SBL_XXXX_00_00.zip, ECU_APP_0350_04_00.zip] SUCCESS”
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- SB-10044123-2379.pdf (711.75 KB)
- SB-10044123-7118.pdf (711.85 KB)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: FC-390120003.01
Replacement Service Bulletin Number: FC-390120003.01
MFR Communication Date: 2012-01-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.