After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: EA15003
Date Opened: 2015-04-01
Date Closed: 2015-09-01
Manufacturer’s Name: Nissan
North America, Inc.
Component Description: SERVICE BRAKES, HYDRAULIC
Recall Campaign: 15V507
Summary Description: Pedal Operation Interference
Summary
On August 11, 2015, Nissan North America, Inc., submitted a Defect Information Report (DIR) describing a condition that may impede the driver's ability to transition quickly and smoothly from the accelerator pedal to the brake pedal in certain model year (MY) 2012 through 2015 Nissan Versa Sedans and MY 2014 through 2015 Nissan Versa Note vehicles (NHTSA Recall No. 15V-507).According to Nissan's DIR, in certain circumstances related to driver foot position and shoe type, the right edge of the driver?s shoe may catch the edge of the center console lower trim panel.Nissan indicated that this condition could cause a slight delay in the smooth transition between the accelerator pedal and the brake pedal which may increase the braking distance; therefore increasing the risk of a crash.Nissan's recall instructs dealers to trim the console panel so that the leading edge is at a greater distance from the driver?s foot.Nissan had previously issued a service campaign (Nissan Campaign ID #P5308; TSB #NTB15-033) on April 16, 2015, to provide the remedy for the same set of vehicles before deciding to change the program to a safety recall.Of the approximately 421,305 vehicles covered by recall 15V-507, approximately 122,558 have already been repaired under the service campaign. ODI's investigation also examined allegations that an HVAC duct in the driver's footwell area may interfere with the driver's right foot in certain circumstances.ODI's analysis of all complaints related to foot obstructions in the subject vehicles identified 45 complaints, 7 crashes and 1 minor soft tissue injury.Thirty-five (35) of the complaints, all 7 crashes and the only injury were caused by the trim panel condition which is the subject of the recall.ODI will continue to monitor complaints related to the HVAC duct condition.This investigation is closed based on Nissan's recall.The VOQs associated with the closing of this investigation are: 10725339, 10723544, 10711794, 10691631, 10649259, 10640644, 10629161, 10614957, 10610356, 10606832, 10606766, 10606670, 10597004, 10573057, 10503811, and 10498000.
NHTSA Action Number: PE15010
Date Opened: 2015-03-24
Date Closed: 2015-09-28
Manufacturer’s Name: Volkswagen Group of America, Inc.
Component Description: AIR BAGS:FRONTAL
Recall Campaign: 15V483
Summary Description: Air Bag Clockspring Failure
Summary
The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of steering wheel clock spring/steering column control module (SCCM) failures in model year (MY) 2012 Volkswagen Passat and CC models.The SCCM is a module within the steering column that incorporates a spiral conductor (a ribbon cable) to electrically connect the steering wheel to the vehicle's electrical system while allowing for the turning of the steering wheel.Complainants alleged that that the clock spring failed while driving and without warning.When the SCCM fails electrically, an air bag warning light is illuminated on the dash of the vehicle.If a vehicle with a failed SCCM were to be involved in a crash of sufficient severity to require deployment, the driver air bag may not deploy properly, or deploy at all.As the result of an Information Request response from Volkswagen, ODI determined that the same SCCM was used in several vehicle models and MYs including: 2010-2013 CC, 2010-2013 Eos, 2011-2013 Golf, 2012-2013 Jetta and Jetta SportWagen, 2010 and 2012-2014 Passat and 2011-2014 Tiguan.ODI identified a total of 29 NHTSA complaints across all affected vehicles potentially indicating a failed SCCM.Drivers often indicated that an audible noise was heard from the steering column when the unit failed. Some drivers also mentioned that there was a noticeable but minor resistance to turning of the steering wheel after the failure with noises coming from the steering column.The average failure mileage is approximately 30,500 miles and failures often occur outside of the factory warranty.There were no reported crashes or injuries identified in either the NHTSA or Volkswagen data as a result of SCCM failures.On July 30th, 2015 Volkswagen notified ODI that it would conduct a safety recall (15V-483) to remedy the SCCMs in 415,825 MY2010-2014 vehicles.According to Volkswagen, the SCCM can become contaminated with human hair or similar fibers entering the unit between the steering wheel and steering column.Over time this can cause the electrical cable to tear and lose connection between the steering wheel and vehicle.Volkswagen will install a cover that attaches over the SCCM to help prevent contaminants from entering the unit.A new SCCM designed to reduce outside contamination intrusion was previously introduced into new vehicle production during the 2014 model year; accordingly vehicles equipped with the new design SCCM are not included in the recall.The recall action initiated by the manufacturer addresses the safety risks identified by the investigation.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchSafetyIssues under the following identification (ODI) numbers: 10760644, 10758777, 10748922, 110734168, 10731545, 10721424, 10717651, 10715305, 10713742, 10713139, 10712295, 10711945, 10704830, 10704221, 10702926, 10702212, 10701406, 10691906, 10683944, 10682136, 10672715, 10670517, 10669312, 10628549, 10607240, 10575783, 10561143, 10552113, 10397670.
NHTSA Action Number: PE15009
Date Opened: 2015-03-23
Date Closed: 2015-09-09
Manufacturer’s Name: Mitsubishi Fuso Truck of America, Inc.
Component Description: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
Recall Campaign: 15V504
Summary Description: Extended Stopping Distance
Summary
On March 23rd 2015 the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) PE15-009 based on Early Warning Report (EWR) data received from Mitsubishi describing brake failures on model year (MY) 2012 -2013 Mitsubishi FUSO FEC 52, FEC72 and FEC92 trucks.Following the receipt of recall 15V-504 that addresses the concerns raised in this investigation, ODI is closing this PE.In November 2013, Mitsubishi released a Technical Service Bulletin (TSB 13-004) where they describe replacing original equipment (OE) brake pad shims with stainless steel shims due to corrosion.This service bulletin was referenced as the remedy in many of the EWR/field reports received by ODI that described extended stopping distances.On July 9th Mitsubishi responded to ODI's Information Request (IR) letter and identified 9 field reports, 26 warranty claims and 1 consumer complaint that resulted in a crash and injuring two consumers.An ODI investigator conducted interviews and analyzed field reports that supported concerns of drivers alleging a spongy brake pedal and difficulty stopping the vehicle while driving.Some reports describe the brake pedal going to the floor when depressed.Mitsubishi indicated that on certain affected vehicles, the original equipped brake pad shims are comprised of a material that rusts/corrodes when subjected to snow/ice melting chemicals applied to roadways.Normal operation in this condition may cause the shims to swell, resulting in increased brake pedal stroke that could result in increased stopping distances, causing a crash without warning.In their IR response, Mitsubishi states that even with the increased pedal stroke, the brake performance still meets safety standards and so the corroding brake shims are not a safety issue.As a result of ODI analysis and further discussions with the manufacturer outlining the risk to safety extended stopping distance represents, Mistsubishi decided to conduct a safety recall.ODI is closing this PE with Mitsubishi's voluntary safety recall 15V-504.Mitsubishi expanded the scope to of the recall beyond the scope of this investigation to include MY 2014 FUSO FEC 52, FEC72 and FEC92 trucks.With the recall action taken by Mitsubishi, this investigation is closed as further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
NHTSA Action Number: EQ15004
Date Opened: 2015-03-20
Date Closed: 2015-04-24
Manufacturer’s Name: UCI International LLC
Component Description: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Summary Description: The fuel pump module may overheat
Summary
The closing report is attached.
Read More...NHTSA Action Number: RQ15001
Date Opened: 2015-03-18
Date Closed: 2015-09-01
Manufacturer’s Name: Nissan North America, Inc.
Component Description: AIR BAGS:FRONTAL
Summary Description: Occupant Classification System Failure
Summary
In April 2014, Nissan North America launched Safety Recall 14V-138 to address problems with the Occupant Classification System (OCS) algorithm in the following vehicles: model year (MY) 2013-2014 Nissan Altima, Pathfinder, Sentra and LEAF; MY 2013 Infiniti JX35; MY 2014 Infiniti QX60 and Q50; and MY 2013 Nissan NV 200/Taxi vehicles.According to Nissan, the OCS may misclassify adult front passenger occupants and turn off the passenger's frontal air bag for an adult occupant of sufficient weight.In March 2015, the Office of Defects Investigation (ODI) opened this Recall Query after the agency received approximately 124 complaints alleging problems with the OCS after the recall repairs and/or other OCS related repairs were made by Nissan/Infiniti dealers.The majority of the complaints alleged the passenger air bag status light stays on (i.e., indicating passenger air bag is turned off) for adult front passengers of sufficient weight.Many of the complaints stated the dealers have made multiple repairs but the problem still persists.In its June 2015 response to ODI's information request under the Recall Query, Nissan provided approximately 1,121 complaints and field reports on the recalled vehicles.These reports alleged OCS issues similar to the NHTSA reports described above.At this time, NHTSA has received a total of approximately 208 complaints (note: total of 1,271 reports shown in the table above eliminates 58 duplicative reports received by ODI and manufacturer).This Recall Query has been upgraded to an Engineering Analysis (EA15-004) to conduct a comparative assessment and further evaluate the effectiveness of the recall remedy which will include a thorough review of the countermeasures taken by Nissan and its suppliers.The ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers:10583283 10585264 10585349 10585379 10592434 10593399 10593501 10594329 10594614 10594755 10595161 10595645 10595946 10596128 10596459 10596952 10597037 10597452 10597518 10597719 10598537 10598869 10604755 10604834 10605188 10605251 10606565 10606828 10607038 10609649 10610519 10610991 10614467 10614609 10614745 10616905 10617008 10617507 10617903 10618099 10618202 10619059 10619563 10620719 10621840 10622214 10625808 10625981 10625998 10626006 10626023 10626335 10626458 10626732 10628355 10629382 10629460 10629606 10630441 10630502 10630990 10632251 10632588 10632934 10632997 10633714 10633810 10637994 10638591 10639040 10639147 10639324 10639473 10643046 10643843 10644203 10644333 10644341 10644690 10644891 10644985 10648834 10648997 10649414 10649772 10649874 10651360 10651564 10651924 10651982 10652024 10658665 10658844 10659484 10660294 10661195 10661358 10661541 10661795 10661855 10662901 10663033 10663338 10663860 10663978 10668054 10668768 10670538 10672807 10673088 10676471 10678478 10678997 10679512 10680748 10680769 10680975 10681656 10682235 10682902 10682993 10683391 10683689 10689672 10689809 10689981 10691626 10692137 10692558 10692625 10693168 10695312 10700614 10700960 10701008 10701011 10701014 10701018 10701023 10701027 10701031 10701032 10701035 10701045 10701055 10701064 10701074 10701146 10701196 10701228 10701237 10701254 10701301 10701306 10701326 10701367 10701370 10701384 10701415 10701453 10701526 10701558 10701656 10701670 10701946 10702003 10702667 10702798 10703032 10703657 10703766 10703813 10704196 10704988 10705530 10705919 10706621 10712543 10712568 10712575 10713335 10714316 10714330 10714536 10714980 10715132 10715945 10717336 10720918 10720971 10721331 10721746 10723424 10724568 10731167 10731868 10732012 10732065
← Previous 1 … 74 75 76 77 78 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- [2025 Newly Added 7 RESET FUNCTIONS] 2025 New Ver. obd2 scanner diagnostic tool CRP123X Elite ADD NEW SPECIAL FUNCTIONS for FREE--Throttle Adaptation, Oil Reset, SAS Reset, BMS Reset, Brake Reset, D-P-F Regeneration, ABS bleeding. Before the trip to the mechanic, launch obd2 scanner crp123x elite can do deeper diagnosis for the car system and react with accurate data in minutes. More, the list of compatible models has been expended. Upgrading frequency is regular, occurring monthly even weekly.
- [FCA AutoAuth &Free Updates for Lifetime]. LAUNCH CRP123X provides no-fee upgrades. Continually enhance vehicle diagnostic software, can diagnose 1996-2025 vehicles with a massive global vehicle database. With integrated AutoAuth, diagnose 2018+ FCA SGW-equipped cars.Yearly functional upgrades ensure CRP123X purchased years ago to keep up with newer diagnostic advancements. Beyond that, we'll always be working on behind-the-scenes bug fixes to drive your scan tool in excellent condition.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership, and will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（merge 4 PIDs in one). It’s convenient for car owners to purchase auto parts and replace it by yourself, 🔥Code Search,DTC Library provide massive information.
- [2025 Hardware Upgrade & One-click Recognition] Faster! Stable! CRP123X Elite car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery,. Wireless WiFi connection embarks on hassle-free faster renewing with one click. LAUNCH code reader effortlessly recognizes vehicle information( (vehicle make, model, and year info) through one-tap automatic VIN scanning, with no manual input, just swift and precise data at your fingertips.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as "" Per-fect Overall Car Diagnostic Scanner "" by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2025 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2025 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2025, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 38 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the""vehicle brand""-""menu""-""system"" - ""special functions"".
- 【2025 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2025 CRP123I V2.0 car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6000mAh rechargeable battery, One-touch Wi-Fi Lifetime Free update for more vehicle coverage, bug fixes,newly added parameters, and functionality to help you access, diagnose and fix more vehicles faster,upgrade of CRP123I.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2025 New Ver. scan tool CRP123I V2.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, D.P.F Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V2.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via W-ifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Fre-e Lifetime Update + AutoAuth for FCA SGW+ Auto Vin】This scan tool features One-click w-ifi update and fre-e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V2.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW),with no limitation.
- 【Cover 10000+ Models & 90+ Car Brands】CRP123I V2.0 Elite launch scanner is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2025 and 90+ car makes worldwide. Support almost all OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls c-ontact us via Q&A/message before purchase.
- 【J2534 PROTOCOL WITH SMARTLINKC】 LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
- 【INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSIS】 X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
- 【TOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+】 LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
- 【3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNER】 LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
- 【COMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARN】 LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABS brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
- [2025 LAUNCH CRP919X] Tired of scan tools that lag and lack features? Meet LAUNCH CRP919X - it’s got all power of XTOOL D8/Autel MK808Z/MK900, plus it’s a pro at ECU Coding = X-431 PROS V+. Better, in 2024 we added more: FCA AutoAuth, CAN-FD, DoIP, expanding features with 3 module modules, all without breaking your bank. The most-recent models are covered with weekly upgrading. CRP919X runs on Android 10.0, 3+32GB RAM/ROM. Time to upgrade your workshop and get more than your money’s worth!
- [ECU Coding] You can run ECU Coding to address challenges such as DTCs related to sensor / actuator circuit breaks, unreliable signals; installing new modules, and flashing hidden features. Unlike other scan tools that support Coding for only 3 brands, LAUNCH CRP919X is available for 100+ brands (need paid OE software for Be.nz, BM.W, V.W, A.udi, G.M, F0rd, even Porsche, etc.) And it comes with easy-to-follow steps to make coding a breeze. *Remember to back up your data before coding.
- [4000+ Active Tests = X431 LAUNCH Scanner] Pay half, yet get all 4000+ tests previously only featured in X431 scanners! You can directly send commands to ECU, drive components like “relays, injectors, coils, solenoids valves, actuators” to move. NO time-consuming old methods BUT verify if they function correctly in just 10 minutes, speeding up troubleshooting 3X FASTER! And NO compatibility headaches. Superior to 80% of diagnostic tools on market, it works on nearly 100% popular vehicles.
- [150+ Brands Coverage + CANFD/DOIP] The compatibility of LAUNCH scanner has always been a leader in industry, with upgrades so frequent that can be weekly! And CRP919X meets all your expectations: 1) added CANFD/DOIP; 2) FCA SGW access, no need extra adapters; 3) cover 150+ all-regional brands; 4) the multilingual menu; you can use it fluently without barriers, and switch languages on your own without having to send e-mails to dealers. (NO waiting 24+ hours just to change a menu language)
- [35+ HOT Services] Compared to similar OBD2 scanners MK808S/D1/909X, the LAUNCH CRP919X has a huge upgrade: E-P-B/Oil_Reset/DP.F/SAS/TPMS/BMS/Injector/Throttle/Suspension/Brake_Bleed, etc. NOT just a big jump in the number of features, BUT also a serious boost in compatibility (more cars supported). In 2024 even added 20+ new features to keep your CRP919X at the forefront of industry, e.g. Motor Angle Calibration/Turbocharging Matching/Swipe/Clutch Matching. MORE is coming your way.
This product presentation was made with AAWP plugin.
Last update on 2025-04-29 / Affiliate links / Images from Amazon Product Advertising API
