After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE19014
Date Opened: 2019-09-09
Date Closed: 0000-00-00
Manufacturer’s Name: Chrysler
(FCA US, LLC)
Component Description: SEATS
Recall Campaign:
Summary Description: Active Head Rest Inadvertent Deployment
Summary
The Office of Defects Investigation (ODI) has identified 128 Vehicle Owner Questionnaire (VOQ) reports alleging the Active Head Rest (AHR) inadvertently deployed without the occurrence of a crash or other rear impact event in model year (MY) 2014 Jeep Grand Cherokee and Dodge Durango, the subject vehicles, produced by Fiat Chrysler Automobiles (FCA). Thirteen of those reports allege injuries mostly involving headaches and soft tissue injuries, however some reports allegedly resulted in disorientation, nausea and vomiting according to complainants interviewed. A small number of EWR field reports have also been identified.The AHR, which is intended to deploy in rear impact crashes to reduce the risk of neck injury, is a spring actuated device controlled by the air bag control unit (ACU).When the ACU senses a rear impact, it signals the AHR to deploy (forward from the headrest, and towards the occupant's head) to limit rearward head motion in the crash. In the reported cases, it appears a plastic material inside the AHR, intended to hold the AHR in the "ready" (compressed) state, fails due to stress and/or fatigue allowing the AHR to actuate unexpectedly. Inadvertent deployments have reportedly occurred at either (or both) front seat positions, when the vehicle is either occupied or unoccupied, when the seat is either occupied or unoccupied, and in some cases (nearly two-thirds) while the vehicle was in motion. The AHR must be replaced to correct the condition, a process that apparently involves disassembly of the seat.ODI is opening this preliminary evaluation (PE) to evaluate the scope, frequency and consequence of the alleged defect in the subject vehicles. Although at a lower rate of occurrence, ODI is also aware of similar reports on other MY Grand Cherokee and Durango, as well as other FCA models and model year vehicles equipped with AHR. These reports will also be evaluated during the PE. The VOQ reports cited above can be viewed at NHTSA.gov under the following reference (ODI) numbers:11253751, 11253472, 11246187, 11245937, 11245486, 11243143, 11242060, 11242057, 11241965, 11240860, 11235131, 11235105, 11234003, 11233187, 11232766, 11230802, 11229833, 11229805, 11229317, 11229224, 11222916, 11222786, 11222582, 11222374, 11221815, 11220929, 11220738, 11218542, 11210851, 11209398, 11206022, 11196571, 11196150, 11195419, 11195025, 11193129, 11192175, 11191661, 11191170, 11184859, 11183953, 11176547, 11175694, 11172752, 11172629, 11165122, 11164591, 11157003, 11153743, 11150228, 11144424, 11144298, 11142311, 11141805, 11141690, 11140134, 11132955, 11130367, 11124408, 11121861, 11121625, 11120549, 11120529, 11120505, 11120167, 11120080, 11119341, 11118896, 11115613, 11115105, 11114757, 11114514, 11113353, 11113344, 11111961, 11110951, 11110796, 11109606, 11105315, 11105130, 11104890, 11104643, 11103883, 11102226, 11101371, 11100450, 11099424, 11099374, 11098705, 11093402, 11092693, 11091564, 11091393, 11091281, 11091020, 11090036, 11089573, 11076058, 11065459, 11065269, 11062915, 11052748, 11048770, 11044852, 11042996, 11039243, 11036080, 11034038, 11032924, 11032648, 11030319, 11023610, 11022744, 11022444, 11019294, 11012467, 11011841, 11005297, 11000632, 10990483, 10981413, 10971121, 10966138, 10965838, 10958790, 10924285, 10894153, 10883998
NHTSA Action Number: DP19003
Date Opened: 2019-09-03
Date Closed: 2020-06-30
Manufacturer’s Name: Volkswagen Group of America, Inc.
Component Description: ENGINE
Recall Campaign:
Summary Description: Vehicle Stalling - Manual Transmission
Summary
The Office of Defects Investigation (ODI) has completed its review of a defect petition received on 14 August 2019 requesting an investigation of an alleged defect of the manual transmissions in Model Year (MY) 2019 Volkswagen (VW) GTI, Golf GTI and Jetta GLI vehicles. The stalling incidents cited occurred without warning as the vehicle slows to a stop or prepares to make a turn across traffic with the clutch pressed in and the vehicle in neutral.The hazard posed by a vehicle stalling event is manifested in the inability of the vehicle to move with the flow of surrounding traffic. Two factors have a major impact on the potential hazard to the vehicle, its occupants and surrounding vehicles: the surrounding traffic speed and the subject vehicle's restart ability. In the case of the vehicles that are the subject of this petition, restart is immediate and the stalls occur when the vehicle is slowing to stop for a traffic signal, making a turn, or is completely stopped. These circumstances substantially reduce the risk of harm to the vehicle, its occupants and surrounding vehicles.As of March 2, 2020, out of the population of 11,333 subject vehicles, NHTSA has identified 214 consumer complaints in its database, with unique Vehicle Identification Numbers (VIN), citing engine stalling as vehicles are being brought to a stop and/or preparing to make a cross traffic turn. When combined with the warranty, field report and customer complaint data received from VW in response to the Information Request letter sent, NHTSA identified 413 unique VINs alleging low speed engine stalling.Volkswagen determined that the low speed / idle engine stall was the result of unwanted gases remaining in the cylinder caused by the intake valve camshaft not being in the correct position at idle. The intake camshaft is in an advanced position. This advanced position results in too much overlap with the position of the exhaust valve camshaft, allowing both the intake and exhaust valves to be open at the same time. The erroneous advanced position of the intake camshaft is a result of low oil pressure at idle and high oil temperatures, greater than or equal to 110?C/230?F combined with engine control algorithms in the Engine Control Module (ECM) that position the intake camshaft. Based on examination of returned engines, only engines manufactured at the Silao Mexico plant were affected due to a tolerance stack-up issue with the oil system of the engines.In December of 2019, VW initiated a Service Action (24FD) to remedy the stalling issue in the affected vehicles. The warranty for the affected vehicles was extended to December 31, 2025. The software in the Engine Control Module (ECM) will be updated with a new calibration value for the adaptation nodes of the regulation valve. This is a directed action with letters being sent to vehicle owners asking them to bring their vehicles to their dealership to have the software update installed in their vehicle. The letters were sent in December 2019.After thoroughly assessing the material submitted by the petitioner, information already in NHTSA's possession, information submitted by Volkswagen in response to an information request and the potential risks to safety implicated by the petitioner's allegation, NHTSA does not believe that the stalling condition as alleged by the petitioner indicates the likelihood of a safety related defect that would warrant a formal investigation, therefore the petition is denied. Further specifics can be found in the Federal Register Notice.ODI complaint ID Numbers are listed on the attached sheet.
NHTSA Action Number: DP19002
Date Opened: 2019-08-16
Date Closed: 2019-10-16
Manufacturer’s Name: Nissan North America, Inc.
Component Description: AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION
Recall Campaign:
Summary Description: Front Occupant Classification System Mat
Summary
A defect petition (see DP19-002) was received July 23, 2019 alleging that the occupant classification system (OCS) sensor (mat) in model year (MY) 2011 Nissan Leaf vehicles is defective and affects the proper deployment of the passenger front air bag. The petitioner provided a list of potentially related NHTSA reports and noted a Nissan recall involving later MY Leaf vehicles with OCS defect. NHTSA is granting the petition and opening a preliminary evaluation in response, please see PE19-015.Since receiving the defect petition, the Office of Defects Investigation (ODI) has determined that the MY 2011 and 2012 Leaf share a common OCS design, both using the same sensor mat for passenger presence sensing. Starting in MY 2013, Leaf OCS was changed to a design using a different sensing system, one that did not use the mat present in prior model year, Nissan Leaf. While MY 2013-2016 Leaf vehicles were recalled for an OCS defect under recall 16V-244, a recall influenced by ODI investigation EA15-004, earlier MY Leaf vehicles were not included because they were not affected by the particular defect involved in that recall.ODI identified and reviewed 13 vehicle owner questionnaire (VOQ) reports in its database, one of which is a duplicate, involving MY 2011 and 2012 Leaf vehicles that allege a problem with the OCS. The VOQs indicate that an OCS warning light illuminated at which point the vehicle was diagnosed and it was determined the sensor mat was the cause of the OCS problem. Most of the VOQs also noted the high cost of repair, which apparently involves replacement of the passenger front seat, according to complainants. None of the VOQs allege a problem with the performance of the passenger air bag, an injury, or a fatality due to the failure of the OCS.During the evaluation of this petition, ODI did not request information from Nissan regarding the complaint data in its possession, and accordingly the manufacturer complaint counts shown above are marked as not applicable. ODI will request this information during the upcoming investigation.The ODI reports cited above can be reviewed at NHTSA.gov under the following identification (VOQ) numbers: 11234415, 11207486, 11196006, 11193208, 11180021, 11176324, 11172159, 11152569, 11123812, 11103556 (duplicate of 11180021), 11102456, 11101830, 11052546.
NHTSA Action Number: PE19009
Date Opened: 2019-08-06
Date Closed: 2020-01-22
Manufacturer’s Name: Subaru of America, Inc.
Component Description: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Recall Campaign: 19V701
Summary Description: Occupant Detection System (ODS) Failure
Summary
The Office of Defects Investigation (ODI) opened PE19-009 to investigate 51 complaints and additional Early Warning Report (EWR) data related to allegations of front passenger seat Occupant Detection System (ODS) malfunctions in model year (MY) 2016 through 2018 Subaru Forester vehicles. These vehicles use a capacitive type ODS, which is intended to classify the occupant of the passenger seat as either full-sized, small stature, a child seat or other object. The complaints reported the ODS failed to operate properly, the SRS (Supplemental Restraint System) warning light illuminated, and/or the ODS incorrectly suppressed (turned off) the front passenger air bag when the seat was occupied by a full-sized passenger. In a frontal crash that is sufficient to warrant deployment, a suppressed air bag may increase the risk of injury to the occupant of the seat.On August 14, 2019 ODI sent an Information Request (IR) to Subaru requesting information on the subject vehicles and MY 2014-2015 Subaru Forester vehicles.On October 3, 2019, Subaru submitted a Defect Information Report (DIR) to NHTSA describing a safety defect in the passenger-side front airbag Occupant Detection System (ODS) harness of 366,282 MY 2015-2018 Subaru Forester vehicles equipped with seat heaters.The DIR stated that over time, due to a decrease in contact pressure between the terminals in the ODS sensor mat harness, a temporarily unstable electrical connection may be possible. If the connection is temporarily unstable, the ODS may not properly determine the status of the right front seat occupant. If the ODS is unable to correctly determine the status of the front occupant, the airbag warning light may illuminate, and the front passenger airbag may deactivate even though the seat is occupied, increasing the risk of injury to the front passenger in the event of a crash.Using vehicle production data and field occurrence frequency, Subaru determined the potentially affected vehicle production range to be between January 20, 2015 ?and August 1, 2017.In addition, Subaru indicated that over 99 percent of the related MY 2015-2018 field reports with vehicles in the production range involved vehicles with seat heaters.NHTSA's analysis of complaint and warranty claim data showed 1,440 of the complaints and 11,672 of the claims involve vehicles with seat heaters that were built within the production range covered by Subaru's recall.In addition, NHTSA's analysis showed a complaint rate of 393.1 per hundred thousand vehicles for the recalled population and 89.0 for MY 2014 through 2018 vehicles that are not included in the recall. Analysis of warranty claim data found a claim rate of 3.2 percent for the recalled population and 0.3 percent for MY 2014 through 2018 vehicles that are not included in the recall.Subaru will instruct owners with Subaru Forester vehicles produced in the affected vehicle production range, to bring their vehicles to a dealer to have the sensor mat harness, inspected and replaced with a new part, including the seat cushion assembly, if necessary.Based on ODI's analysis, the actions taken by Subaru mitigate any unreasonable risk to safety posed by ODS sensor mat failures in the subject vehicles. For subject and peer vehicles outside the recall population and those equipped without seat heaters, ODI's analysis indicates that there is currently no safety-related defect trend. Given these circumstances, further use of the agency resources in this matter does not appear to be warranted. Accordingly, this investigation is closed.
NHTSA Action Number: EA19002
Date Opened: 2019-07-29
Date Closed: 0000-00-00
Manufacturer’s Name: Nissan North America, Inc.
Component Description: SUSPENSION:REAR
Recall Campaign:
Summary Description: Rear Suspension Control Arm Failure
Summary
In response to the Office of Defects Investigation's (ODI's) information request (IR) letter dated December 6, 2018, Nissan provide an interim response on January 18, 2019, and a final response on February 1, 2019. The majority of the Nissan and ODI failure reports are from vehicles registered in so called "salt belt" states. No crashes, injuries or fatalities have been confirmed as of this date.Nissan's IR response indicated the MY 2013 through early 2018 Nissan Altima shared a common rear lower control arm design. Accordingly ODI has expanded the scope of the investigation to include all potentially affected vehicles. Nissan reported implementing a design change in January 2018 to improve the durability of the lower control arm, and also provided an analysis indicating that the design change resulted in a significant (which Nissan estimated between 5 to 9 times) improvement to its durability.Nissan acknowledges that a crack may develop in the lower control arm due to stress and loading from normal use of the vehicle, and that road salts commonly used for snow and ice treatment results in corrosion that exacerbates growth and progression of the crack. Once the crack develops, continued use of the vehicle causes the control arm to separate at one of four attachment points that connect it to the vehicle chassis. Nissan determined the current incident rate was 0.003%. Based on testing it conducted as well as observations from field failures, Nissan maintains the separation, whether it occurs either statically or while in motion, is readily detectable, that the separated component does not contact the road surface or braking components, and that the vehicle remains controllable and can be safely brought to a stop. Nissan states that due to low incident rate, high detectability, and low risk of adverse vehicle dynamics, it does not believe the subject control arm failure poses an unreasonable risk to motor vehicle safety.Nonetheless, Nissan has indicated its intentions to conduct a non-safety, proactive field action for MY 2013 Altima in specific states with high salt usage. Launch of the potential action would be in phases, likely beginning in late 2019 in salt belt states with higher incident rates, and would involve replacement of the lower control arms. Components recovered from the field action are expected to be used to study additional remedy options.During the Engineering Analysis, ODI will continue to collect and analyze complaint and field data in its efforts to fully assess the scope and frequency of the alleged defect. More importantly, ODI will also seek additional information and data regarding the potential safety consequences of rear lower control arm failure, both from evidence collected from field failures and through more rigorous and comprehensive vehicle testing to be conducted by either Nissan and/or NHTSA.The ODI reports (VOQs) cited above can be viewed at NHTSA.gov under the following reference numbers: 11234334, 11234232, 11234189, 11233771, 11233234, 11232381, 11231589, 11230323, 11230184, 11229023, 11229003, 11228730, 11228651, 11228631, 11228625, 11223086, 11222602, 11222427, 11222303, 11221802, 11219943, 11217980, 11217542, 11217505, 11217290, 11210699, 11209647, 11208580, 11208274, 11207545, 11206310, 11205711, 11205461, 11203864, 11203005, 11195416, 11193545, 11193020, 11192269, 11192066, 11191270, 11191207, 11191185, 11191042, 11190360, 11190323, 11187334, 11187157, 11186747, 11186195, 11185664, 11185632, 11185589, 11183799, 11183295, 11183198, 11182705, 11182528, 11182265, 11182137, 11182088, 11181373, 11181223, 11181155, 11181009, 11180126, 11176565, 11176261, 11176135, 11175821, 11172604, 11172200, 11172065, 11170019, 11169930, 11165194, 11163833, 11163489, 11162559, 11162195, 11161956, 11161497, 11161117, 11157323, 11157234, 11156772, 11141169, 11139516, 11129476, 11122829, 11114374
← Previous 1 … 42 43 44 45 46 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bi-directional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
- Bi-Directional Control for Quickly Locating Problems: The Bi-Directional Scan tool allows you to send commands directly from your smartphone to your vehicle's ECU for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, EGR Learning, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.
- Wide Compatibility Can-FD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us via support@kingbolen.c o m to confirm compatibility before purchase.
- Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time performance. Data logging/reporting is available for playback and further analysis.
- 2025 Newest Top-tier Car Scanner: KINGBOLEN K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Control Test, ECU Online/Offline Coding, Customization, 31+ Restes, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth, 3-year Fr-ee Software Upgrade. After 3 years, it will continue to work with the last update version, but online functions can't be available
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with AUTO VIN can do one-click to scan ECUs on most of vehicles, like PCM, ECM, EPS, BCM, TPMS, SAS, A/C system... to read/clear code, view live data, freeze frame, read ECU info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bi-Directional Control Test/Active Test: Bi-directional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to sav* money and time on car repairs when performing complex maintenance and repair
- Advanced ECU Coding: ECU Coding allows you to refresh hidden functions to optimize vehicle performance, customize vehicles, match the replaced components with ECU. In contrast to similarly priced products that only support Offline Coding, the KINGBOLEN K7 diagnostic tool can do Variant coding for Benz and also supports Online Coding which can send coding values directly from the server, faster and more accurate. (Note: please check compatibility before order.)
- 31 Reset Functions: Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional automative OBDII scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Coding, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. NOTE: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Lifetime Free, All-In-One Car Scanner for Toyota Lexus Models】As a specialized diagnostic tool for Toyota & Lexus, this 2025 newest KINGBOLEN SOLOSCAN provides In-depth All systems diagnostics, F.ree Full Reset Functions, Powerful Bi-directional Control, ECU Coding, Lifetime F.ree Update, 22 Languages, No IP Limited, etc. Bluetooth technology allows the obd2 scanner to be linked to your cell phone easily, showing what's wrong and how to fix it, so you can understand your car's health anytime, anywhere!
- 【OE-Level Full System Diagnostics】This bluetooth obd2 scanner provides in-depth diagnostic information for all available modules including TCM/ECM/ABS/BCM/SAS/EPB/Fuel...systems. Soloscan can read ECU info, read/clear codes, view data stream, retrieves freeze-frame, do active functional test and print the diagnostic report you need. Master cars situation with a few simple clicks!
- 【Powerful Bi-Directional Control/Active Test】Kingbolen Soloscan car diagnostic scanner for Toyota & for Lexus, can send commands to vehicle systems/components to identify potential problems and test their working status. You don't need to tear things apart they can be tested electronically like opening and closing of the sunroof and things of that nature.
- 【Advanced ECU CODING Function】This bidirectional scan tool supports Component Matching, Customize OE-settings, Flash Hidden Feature, Optimize car performance. You can activate higher-level functions or disable annoying features, like Auto Rear Mirror Folding, Auto Door Lock/Unlock, Daytime Running Light, etc.*NOTE: Coding functions vary by model & year. Not for all models, please check compatibility before purchase.
- 【All F-ree Maintenance Service】The diagnostic scan tool is equipped with powerful free reset services to perform after repair and maintenance, including Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, TPMS reset, D.P.F Regen, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.
- 【KINGBOLEN EDIAG Plus Bi-directional Control Bluetooth Scanner】KINGBOLEN Ediag Plus Bluetooth Scanner （Upgraded version of thinkdaig/ediag）equipped with 15+ resets, ECU coding, Bi-directional test, CAN-FD Protocol, Auto-VIN, full systems diagnosis, one year F-ree update. Bluetooth connection makes your phone becomes a smart diagnostic scanner with wider working range and you can operate the device conveniently.
- 【Full Systems Diagnostic Tool】As an OE-Level full systems diagnostic tool, KINGBOLEN Ediag plus supports read/clear fault codes, read live data, view 4-in-1 live data of in text & graph, ECU information, read control module information, actuation tests and maintenance functions for ECM, ABS, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc..The diagnosis report reveals the fault codes fast, helps you located the related components efficiently.
- 【15+ Special Service Functions】KINGBOLEN EDIAG plus obd2 scanner diagnostic tool covers almost all commonly used maintenance: Oil Light Reset, Battery Reset, SAS Calibration, Injector Coding, TPMS Reset, ABS Bleeding, Electronic Throttle Learning, Headlight Matching, Sunroof Initialization, Suspension Matching, Transmission Learning and more advanced functions can be found in the car model.
- 【ECU Coding】The KINGBOLEN EDIAG Plus diagnostic tool is used as an OE Level scanner. ECU Coding allows you to match replaced components with ECU data, hidden flash functions for BMW, for GM, for Benz, etc. Whether you are a private owner or a professional technician, EDIAG Plus is a powerful and handy scanner tool for you. Coverage list may vary by car brand and model. Please check with us before placing an order.
- 【Bidirectional Test】This EDIAG plus Bluetooth scan tool could send commands to and receive information from ECU of the vehicles to test the solenoids and actuators working status, which finds faults without using the vehicle controls and no need disassembling components, saving a lot of time to identify the root cause. You can use Bidirectional Test to check Window Up and Down/Wiper/Door Test, Rearview Mirror Test, Headlight Test and more.
- 【Advanced Diagnostic Device】KINGBOLEN K10 ELITE Car Code Reader is equipped with 10.0-Inch HD Touch Screen, Rear Camera 8.0MP, powerful Android 10.0 OS, 4+128GB Extended Memory, lasting 3.85V/12600mAh（7.7V/6300mAh）Battery and WIFI/Bluetooth Diagnostics. Supports Full System Diagnosis+ 40 Reset Services+ ECU Coding+ Active testing+ Remote Support+ Intelligent Diagnosis+ Modular expansion+ ADAS Calibration+ Topology map+ Guidance Function+ AUTO VIN. Enjoy maintenance and meet your needs easily!
- 【OE-Level Full Systems OBD2 Scanner】KINGBOLEN K10 ELITE OBD2 scanner supports vehicle All Systems Diagnostic and OBD2 Full Function, it can Read/Clear Fault Codes, Read Live Data/Freeze Frame, Read Control Module Information, Actuation Tests and Reset Functions for TPMS,ECM,BCM,ABS,SRS,TCM,BMS,SAS,A/C system etc.. The wired connection is more stable during use and is not easily interrupted. One-Click to scan all ECU, Applicable to maintenance technicians, repair shops & individual owner
- 【Intuitive Topology Map Design】K10 Elite Diagnostic Tool introduces the innovation of Module Topology Mapping which illuminates the interplay between diverse vehicle modules and swiftly pinpoints faulty ones in a single glance. This feature slashes guesswork, enhances diagnostic every equipped systems to troubleshoot fault codes. Recommend to choose Smart Scan when use this function.It Support 5 Extended Modules and more, ADAS Calibration, CAN FD/DoIP+ FCA SGW, Diagnostic Report QR code Share
- 【40+ Services/Calibration/Relearn Functions】K10Elite Wired OBD2 Diagnostic Tool comes with 40+ Functions, Such as Oil, EPB, SAS, Throttle, BMS, TPMS Reset, ABS Bleeding, Injector Coding, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Zero Point Calibration, Fuel Injector Balance, Stop/Start Reset, A/F Reset, Elec.Throttle Relearn etc. It can provides step-by-step maintenance Guide Function for Volkswagen/Audi/Skoda/Seats etc. FR-EE UPDATE for 2 YEARS,Additional Savings
- 【Efficient Bi-Directional Control & ECU Coding】K10 ELITE can be used to verify diagnosis and pinpoint repairs needed with Powerful Active Tests, Such as Fuel Injector, Coolant Fans, Coolant Pump, Windshield Wipers, EGR Valve, Sunroof, Windows etc. It supports Online/ECU coding for vehicles, which helps to match and code after ECU replacement, personalized car settings including Light, ABS Module etc. It can also unlock hidden functions like movement pointer, horn alerts, disable seat warning etc
This product presentation was made with AAWP plugin.
Last update on 2025-04-22 / Affiliate links / Images from Amazon Product Advertising API
