After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE20007
Date Opened: 2020-05-07
Date Closed: 2020-10-30
Manufacturer’s Name: Land Rover
Component Description: STRUCTURE
Recall Campaign: 20V623
Summary Description: Spoiler Cover Detachment
Summary
The Office of Defects Investigation (ODI) analyzed complaints received from the public and complaint data submitted by Jaguar Land Rover North America (JLR) in response to the Information Request (IR) letter for PE20-007. ODI identified a total of 132 non-duplicative reports alleging incidents in which the spoiler cover detached from the certain Range Rover vehicles while in motion, including 3 resulting in broken windshields, 6 involving detached spoilers striking trailing vehicles with damage unknown, and 4 in which the subject vehicle driver observed trailing traffic swerve to avoid the detached part. ODI?s analysis of warranty data submitted by JLR identified 266 claims to repair detached spoiler covers and 252 claims to repair loose covers. The subject vehicles are covered by a standard warranty of 4 years/48,000 miles. Analysis of part sales data found evidence of continued failures that may be related to the alleged defect after the warranty period, with 5,487 rear spoilers sold through May 2020. The number of spoiler sales related to the alleged defect is unknown.On October 8, 2020, JLR submitted a Defect Information Report (DIR) to NHTSA describing a defect in the adhesive bonding system of the rear spoiler covers in approximately 21,834 MY 2010 through 2011 Range Rover Sport vehicles manufactured from April 27, 2009 through March 28, 2011 (NHTSA Recall 20V-623, JLR Recall N499). JLR?s report states that the recalled vehicles have a bonding agent that has insufficient adhesive properties. After numerous heat cycles the spoiler cover may begin to loosen from air turbulence experienced during high-speed driving. If a loosened spoiler cover is not detected and repaired, the cover may detach from the vehicle while driving and become an airborne road hazard. Detachments are most likely to occur during high-speed driving. JLR's recall remedy will apply a new adhesive to properly secure the upper spoiler cover.This investigation is closed based on Recall 20V-623. The ODI reports cited above can be reviewed at NHTSA.gov under the following ID numbers:10984653, 11192264.
NHTSA Action Number: PE20006
Date Opened: 2020-05-01
Date Closed: 2024-03-27
Manufacturer’s Name: Daimler Trucks North America, LLC
Component Description: STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
Recall Campaign:
Summary Description: Intermittent Loss of Power Steering Assist
Summary
On May 1, 2020, the Office of Defects Investigation (ODI) opened PE20006 to investigate complaints of intermittent loss of power steering assist in Daimler Truck North America (DTNA), Volvo Trucks of North America (Volvo) and PACCAR vehicles equipped with a ZF/TRW (TRW) THP60 steering gear. The investigation focused on 2010-2020 DTNA Freightliner Cascadia, M2 and WST; Volvo VN, VAH and VHD and PACCAR 337, 365, 389, 567, 579 model vehicles.Field reports and interviews with fleet drivers allege that high power steering fluid temperatures could result in internal seal and bearing failures causing pressure fluctuation, affecting left and right-hand turns. The inability of the driver to steer the vehicle as intended can increase the risk of a crash and injury. ODI analyzed data provided by TRW, DTNA, Volvo, and PACCAR in response to individual information request letters.ODI found that most failures occurred within the first two years and/or 50,000 miles of service. The claim rate decreased with time and miles in service and remained less than 0.5%. ODI normalized data from each of the manufacturers and determined that there was not a substantial difference in the failures.Additionally, TRW improved a seal in the steering gear in December 2015.Trucks built on or after 2016 (as 2017 and newer model years) show a decreasing trend of failures. In view of the overall low failure rate, the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
NHTSA Action Number: PE20005
Date Opened: 2020-04-28
Date Closed: 2022-04-04
Manufacturer’s Name: Mack Trucks, Inc.
Component Description: POWER TRAIN:MANUAL TRANSMISSION
Recall Campaign:
Summary Description: mDrive Transmission Failure to Disengage
Summary
On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.
NHTSA Action Number: DP20004
Date Opened: 2020-04-24
Date Closed: 2020-10-09
Manufacturer’s Name: Mercedes-Benz USA, LLC
Component Description: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Recall Campaign:
Summary Description: Rear brake line failure
Summary
On April 10, 2020, NHTSA's Office of Defects Investigation (ODI) received a defect petition from Mr. Surjit Singh alleging premature corrosion of the rear brake lines in his 2013 Mercedes-Benz E350 sedan. The petitioner states that he was recently informed by a Mercedes dealer service department that his car had severely rusted brake lines that need[ed] to be replaced immediately at a cost of about $3300. He further stated that the dealer service advisor informed him that he had seen the issue on many cars like his. The petitioner requested ?that NHTSA launch an investigation into this serious issue of rusting brake lines on [his] 2013 Mercedes E350.? The brake line corrosion reported by the petitioner did not result in brake line leakage or any compromise in brake system performance before it was detected in a dealer vehicle inspection. The petitioner submitted a complaint to NHTSA documenting his experience (NHTSA ID 11319024).On April 24, 2020, ODI opened Defect Petition DP20-004 to evaluate the petitioner?s request. ODI conducted a search for all consumer complaints and Early Warning Reporting (EWR) data related to allegations of brake line corrosion or leakage in 2013 Mercedes-Benz E350 sedans and similarly equipped vehicles. The 2013 E350 is a fourth-generation Mercedes-Benz E-Class vehicle (W212 platform), which was first sold in the United States in 2009 as a 2010 model. Mercedes-Benz sold approximately 245 thousand model year 2010 through 2015 E-Class sedan and wagon vehicles in the United States with the same brake line design as the petitioner?s vehicle.ODI?s search for complaints and EWR data in 2013 Mercedes E350 vehicles found no additional records related to the alleged defect. Expanding the search to all W212 platform vehicles identified just one incident, a complaint alleging unspecified brake line corrosion and leakage in a 2011 Mercedes-Benz E550 (NHTSA ID 10902081). The complaint did not allege that the brake line leakage resulted in reduced brake performance, crash, or injury. The resulting failure rate of 0.4 failures per hundred thousand vehicles is extremely low for a population that includes vehicles that have been in service for over ten years. After reviewing the available data, ODI has not identified evidence of a defect trend in the subject E-Class vehicles that would support opening a defect investigation into premature brake line corrosion failure. NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Since the information before the Agency is not indicative of a vehicle-based defect, it is unlikely that any investigation opened because of granting this petition would result in an order concerning the notification and remedy of a safety-related defect. Therefore, upon full consideration of the information presented in the petition and the potential risks to safety, the petition is denied. The denial of this petition does not foreclose the Agency from taking further action if warranted or the potential for a future finding that a safety-related defect exists based upon additional information the agency may receive.A Federal Register notice further detailing NHTSA?s reasons for denial of the petition will be forthcoming.
NHTSA Action Number: PE20004
Date Opened: 2020-04-07
Date Closed: 2020-10-30
Manufacturer’s Name: Suzuki Motor USA, LLC
Component Description: EXTERIOR LIGHTING:HEADLIGHTS
Recall Campaign: 20V612
Summary Description: Loss of headlights
Summary
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE) on April 17th, 2020 to investigate Early Warning Reporting (EWR) reports submitted by Suzuki alleging loss of headlights on model year (MY) 2018 Suzuki GSX 250R motorcycles.On May 29, 2020, ODI learned, through the Suzuki response to an ODI Information Request (IR) letter, that they were aware of two complaints, multiple field reports, thirty-six warranty claims and one goodwill claim describing headlight failures on the subject motorcycles. Within the field reports, ODI discovered there were many failures involving both the low and high beams on the same motorcycle, resulting in a complete loss of vehicle lighting. All reported failures occurred on MY 2018 bikes equipped with headlight assembly part number 35100-20K30. Additionally, Suzuki made ODI aware of a design change effective February 27, 2018 on MY 2019 motorcycles that resulted in a headlight assembly part number change to 35100-20K31. This design change was made to improve serviceability of the headlamp bulb. According to Suzuki, the holding part of the bulb spring had a structure that allowed the bulb spring to become displaced from its proper mounting position when the bulb spring was removed from the holding claw to replace the bulb. Analysis of headlamp failure data showed that no MY 2019 motorcycles, or bikes manufactured with the updated headlight assembly, experienced a headlight failure. The original headlight assembly was withdrawn from production and the redesigned headlight was made available as a service replacement part in September 2018. The modified headlight can be interchanged with earlier production assemblies.Discussions between ODI and Suzuki resulted in the manufacturer recalling MY 2018 Suzuki GSX 250R motorcycles for a sudden loss of headlamp illumination. This sudden failure could reduce operator visibility and/or conspicuity, increasing the risk of a crash.This Preliminary Evaluation has been closed due to the recall issued by the manufacturer (NHTSA Recall 20V-612).
← Previous 1 … 37 38 39 40 41 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- 【HIGH COST-EFFECTIVE SCANNER FOR CAR】The VD70S OBD2 scanner diagnostic tool offers top-tier features and hardware for accurate, fast diagnostics. Enjoy 30X faster wireless WiFi connectivity, bi-directional control, 36+ hot services, OE all system diagnostics with 8-in-nne data graph, ECU coding, and PMI. With advanced functions like V.A.G Guided Function, CAN FD & DoIP, and FCA AutoAuth, this escaner automotriz supports 100,000+ vehicles. The Android 10.0 OS, 2+64GB and a long-lasting 18.25Wh battery make it perfect for professionals and DIY mechanics. Get 3 years of f*ree updates and 15 languages for worldwide use!
- 【WIRELESS WiFi & WIRED DUAL CONNECTION】Compared with traditional BT connection, VD70S car scanner diagnostic tool makes innovative use of the 2025 latest ✔30X faster WiFi wireless connection technology. The VD70S offers both wireless and wired connections, with a diagnostic range of 66ft or further while maintaining a stable connection. Enjoy the freedom to move around during repairs for added convenience and flexibility. ✔NOTE: No extra WiFi needed. Just plug the VCI into the OBD2 port, and the scanner will connect automatically.
- 【4000+ BI-DIRECTIONAL CONTROL】VD70S bidirectional scan tool allows sending commands to the ECU to perform active tests, such as A/C Clutch Test, Fuel Injector Test, window, sunroof test etc. Significantly reduce diagnostic time and boost 5X faster efficiency. It is a must have tool for every auto technicians and mechanics. ✔Note: Active tests available vary across vehicles, please provide VIN for compatibility check.
- 【36+ SERVICES & RESETS, RELEARNS, CALIBRATIONS, ADAPTATIONS, INITIALIZATIONS】VD70S scan tool offers 36+ commonly used maintenance reset functions to meet the needs of every mechanic, including ✔Crank Sensor Relearn, ✔Oil Reset, ✔EPB, ✔SAS, ✔BMS, ✔Throttle, ✔Injector Coding, ✔ABS Bleed, ✔TPMS, ✔ABS Initialization, ✔Fuel Trim Reset, ✔SWS Calibration, ✔Idle Relearn etc. ✔For more advanced hidden functions, please check your diagnostic tool menu: Diagnose>Select Specific System>Special Functions. Note: Functions vary by vehicles. Please check compatibility with VIN & functions via ✔vdiagtool2 @ outlook . c o m before purchase.
- 【OE All SYSTEMS DIAGNOSTICS & 8-IN-ONE GRAPHING】Perform full system diagnostics on your vehicle with the VD70S car scanner to ✔Read ECU Info, ✔Read/Clear Codes, ✔View Freeze-Frame, ✔View Live Data Stream, ✔Export Data as CSV, and ✔Perform 8-In-1 Graphing for a comprehensive view of your car’s performance. ✔Perform Active Tests and Special Functions to keep your vehicle running at peak performance. ✔V2.0 Diagnostic Reports allow you to add logos, customer info, and attachments, providing dealership-level diagnostics and accurate, in-depth reports.
- Your Efficient Solution for Car Maintenance: The 2025 VD70 OBD2 Scanner Diagnostic Tool is designed by a professionals for automotive technicians, workshops, and DIY enthusiasts, ensuring no unnecessary costs are added to the price. It provides OE All Systems Diagnostics, 36+ Reset Functions, Bi-Directional Control, and ECU Coding, etc. With 2+64GB storage, an 18.25Wh battery, and 3 years of free updates, it’s built for both immediate and long-term use, offering dependable support for a wide range of vehicle maintenance tasks.
- Why You Need a OBD2 Scanner with Bidirectional: With the VD70, you get a full bidirectional scan tool capable of performing 4000+ active tests. It can command car modules and receive data from the ECU to test components like EVAP, ABS pumps, windows, and more—all with one tool. This helps you pinpoint faults accurately, saving time and money by reducing trips to the shop and the need for multiple scanners. Whether you're a pro or a DIYer, this diagnostic tool simplifies complex diagnostics. Pro Tip: Send us your VIN before purchase to confirm compatibility.
- 36+ Special Functions & Vehicle-Specific Features: The VD70 OBD2 scanner offers 36+ services, including Oil Reset, EPB, BMS, Throttle Adaptation, Injector Coding, ABS Bleed, Crank Sensor Relearn and TPMS Reset. It also provides vehicle-specific functions include reset, adaptation, initialization, and calibration. These capabilities help you perform comprehensive tasks like system reset with ease. Note: Features vary by vehicle make and model. Please check compatibility with your VIN by contacting us at vdiagtool2 @ outlook . c o m before purchase.
- Advanced ECU Coding & PMI for Specific Brands: This auto diagnostic scanner supports advanced ECU coding for specific european vehicles for VW, for Audi, for Skoda, for Mercedes-Benz, for Mitsubishi. It also enables ecu coding for BMW, for Volkswagen, for Jaguar, and for Land Rover. From coding and component matching to adaptive data resets, this scan tool helps you flash hidden features and match components after repairs or replacements. Note: ECU coding functionality varies by vehicle and module, please check the compatibility before order.
- OE All-System Diagnostics & 8-in-One Data Graphing: With full system diagnostics, the VD70 automotive diagnostic scanner covers essential vehicle systems such as Engine, Transmission, ABS, Airbags, Brake, Chassis, and more. It allows you to read/clear codes, access ECU information, view live data streams. You can export data as CSV, record/playback data, view freeze-frame data, and perform active tests and services-all with one car computer diagnostic tool. This comprehensive analysis helps pinpoint issues quickly, leading to more accurate repairs.
- 【A MUST-HAVE TOOL FOR DIYERS】- VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】- VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light).car code reader
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】- This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【ENHANCED OBDII SCANNER DIAGNOSTIC TOOL】VDIAGTOOL VD30 Pro performs all 10 OBD2 tests: Turn off Check Engine Light(CEL) , Read/Clear Fault Codes , Live Data(4-In-1 Graphing) , Freeze Frame , One-Click I/M Readin_ess(Smo_g Check) , On-Board Monitor Test(Mode 06) , Component Test , O2 Sensor Test , Vehicle Info , Module Present and useful features like , Voltage Test , DTC Lookup , Data Playback & Printing. Get this car code reader today and save your time and costly trip to a dealership!
- 【EASY TO USE】The VDIAGTOOL VD30 Pro obd2 scanner is specifically designed for car owners, providing an intuitive and user-friendly interface that caters to individuals with limited automotive knowledge. It effectively diagnoses the cause of the check engine light, retrieves and clears engine fault codes, deactivates the check engine light (MIL), and resets monitors.
- 【RELIABLE PERFORMANCE LASTS FOR YEARS】The VDIAGTOOL VD30 Pro car code reader and reset tool is meticulously crafted using the latest upgraded chip, and high-quality wear-resistant and drop-resistant materials to withstand the most challenging conditions, offering longevity and reliability in every diagnostic session. Continuously updated to ensure compatibility with the latest vehicle models and technologies, it promises reliable performance for years to come.
- 【ONE-CLICK SMO_G CHECK】 VDIAGTOOL VD30 Pro OBD2 scanner code reader features One-Click I/M Readiness hot key that shows various sensors ready status on a single screen and help you keep the engin_e in good conditions, and get the vehicle ready for the annual smo_g check.
- 【DTC LOOKUP+VOLTAGE TEST+DATA REVIEW, PLAYBACK & PRINTING】VDIAGTOOL VD30 Pro auto scanner comes with 98563+ built-in DTC library that shows brief fault code definitions right on the display. This scanner for car comes with voltage test feature to check real-time battery voltage and no more voltage too low to start the car again. Data Review & Playback and Printing features allow you to review the recorded live data, play it back or print it out to share with your mechanic or customers.
- 【Why VDIAGTOOL VD70 Lite is A Game Changer?】VDIAGTOOL VD70 Lite offers essential car inspection and repair features at a more affordable price(Under $300), including Full Bidirectional Controls, OE Factory Level All Systems Diagnostics, 31+ Hot Services, CAN FD & DoIP, Comprehensive Data Streaming Capabilities (Export as CSV, Recording, Playback, 8-in-One), 3-Year Software Update, etc. Perfect choice for DIYers, Car Owners, Technicians and Mechanics!
This product presentation was made with AAWP plugin.
Last update on 2025-04-20 / Affiliate links / Images from Amazon Product Advertising API
