After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE04054
Date Opened: 2004-07-30
Date Closed: 2004-11-22
Manufacturer’s Name: Chrysler
(FCA US, LLC)
Component Description: LATCHES/LOCKS/LINKAGES
Summary Description: POWER LIFTGATE LATCH
Summary
THIS INVESTIGATION WAS OPENED ON JULY 30, 2004, BASED ON ODI CONSUMER COMPLAINTS ALLEGING UNWANTED OPENING OF THE VEHICLE'S POWER LIFTGATE (PLG) WHILE DRIVING.IN DAIMLERCHRYSLER CORPORATION (DCC)'S SEPTEMBER 17, 2004 RESPONSE TO ODI' S INFORMATION REQUEST LETTER, IT PROVIDED ADDITIONAL CONSUMER COMPLAINTS AND LAWSUITS.DCC STATES IN PART, ...THE PLG LATCH BECOMES STUCK IN A SEMI-CLOSED STATE NOT ALLOWING THE PLG LATCH TO ENGAGE THE STRIKER, THUS NOT CLOSING THE LIFTGATE COMPLETELY.IN THIS CONDITION THE PLG AJAR WARNING LIGHT WILL NOT BE ILLUMINATED AND THE PLG CAN RISE (NOT A POWERED OPEN) WHILE DRIVING. THIS INVESTIGATION HAS BEEN UPGRADED TO EA04-031 FOR FURTHER ANALYSIS.
Read More...NHTSA Action Number: PE04053
Date Opened: 2004-07-26
Date Closed: 2004-11-22
Manufacturer’s Name: Honda (American Honda Motor Co.)
Component Description: AIR BAGS:FRONTAL
Recall Campaign: 04V551
Summary Description: FRONTAL DRIVER AIR BAG
Summary
DURING TWO OF 13 NHTSA RESEARCH & DEVELOPMENT COMPATIBILITY CRASH TESTS, THE DRIVER-SIDE FRONTAL AIRBAG FAILED TO PROPERLY DEPLOY DUE TO A LARGE TEAR IN THE AIRBAG FABRIC.BOTH R&D TEST VEHICLES THAT CONTAINED A FAILED AIR BAG WERE 4-DOOR, 4-CYLINDER (L4) VEHICLES.SUBSEQUENT STATIC AND DYNAMIC TESTS CONDUCTED BY HONDA REVEALED THAT DURING SEVERE CRASH CONDITIONS, THE AIRBAG FABRIC CAN SNAG THE INSIDE SURFACE OF THE AIRBAG MODULE COVER AT THE EMBLEM ATTACHMENT POINTS.HONDA REPORTS THAT THE AIR BAG MODULE AND COVER DESIGN ARE UNIQUE TO THE 4-DOOR, 4-CYLINDER SUBJECT VEHICLES.ON NOVEMBER 17, 2004, HONDA NOTIFIED THE AGENCY THAT IT WOULD RECALL 228,932 MODEL YEAR (MY) 2004 AND 28,428 EARLY-MY 2005 ACCORD L4 SEDANS (UP THROUGH EARLY-OCTOBER, 2004).AS PART OF THE RECALL REMEDY, HONDA WILL INSTALL AN ADDITIONAL PIECE OF PROTECTIVE FABRIC/FLAP BETWEEN THE AIRBAG AND THE INSIDE AIRBAG MODULE COVER.SEE NHTSA RECALL 04V551 FOR DETAILS.IN ADDITION, THERE ARE APPROXIMATELY 250 EXPORTED ACCORD VEHICLES INCLUDED IN THIS RECALL. THE V-6 MODELS AND THE 2-DOOR, 4-CYLINDER MODELS ARE NOT INCLUDED BASED ON DIFFERENT AIR BAG AND AIR BAG MODULE COVER DESIGNS.THIS INVESTIGATION IS CLOSED.
NHTSA Action Number: EA04020
Date Opened: 2004-07-22
Date Closed: 2005-04-28
Manufacturer’s Name: Kia America, Inc.
Component Description: WHEELS:HUBCAP/COVER
Recall Campaign: 05V159
Summary Description: STEEL WHEEL FRACTURE
Summary
ON MARCH 24, 2004, THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED A PRELIMINARY EVALUATION (PE04-030) TO INVESTIGATE ALLEGED STEEL WHEEL FRACTURES IN CERTAIN MODEL YEAR (MY) 2001 KIA RIO VEHICLES.THE SUBJECT VEHICLES ARE EQUIPPED WITH WHEELS MANUFACTURED FROM MAY 12 THROUGH OCTOBER 17, 2000.WHEELS WERE MANUFACTURED DURING THIS PERIOD USING A TOOL (RING DIE) THAT HAD IMPROPER SURFACE TREATMENT.THIS ALLOWED TOOL DAMAGE TO DEVELOP WITH ACCUMULATED USE AND RESULTED IN AN IRREGULAR SHAPED STAMPING ON THE WHEEL DISC AT THE HAT AREA.THE IRREGULAR SHAPED HAT AREA CREATES A STRESS RISER THAT MAY LEAD TO THE FORMATION OF CRACKS.ODI IS AWARE OF 40 NON-DUPLICATIVE CONSUMER REPORTS ALLEGING WHEEL FRACTURE, 6 OF WHICH ALLEGED WHEEL SEPARATION INCIDENTS ON THE SUBJECT VEHICLES.AS OF MARCH 31, 2005, KIA MOTORS AMERICA, INC. (KIA) HAS PAID 535 WARRANTY CLAIMS FOR THE REPLACEMENT OF ONE OR MORE WHEELS ON THE SUBJECT VEHICLES DUE TO FRACTURE.BY LETTER DATED APRIL 18, 2005, KIA HAS NOTIFIED ODI THAT IT WILL CONDUCT A SAFETY RECALL (NTHSA RECALL NO. 05V-159) TO REPLACE DEFECTIVE WHEELS IN APPROXIMATELY 24,119 SUBJECT VEHICLES.KIA WILL REPLACE ALL FOUR STEEL WHEELS FREE OF CHARGE.THE ACTION TAKEN BY KIA IS SUFFICIENT TO RESOLVE THE ISSUES RAISED BY THIS INVESTIGATION.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.
NHTSA Action Number: PE04051
Date Opened: 2004-07-22
Date Closed: 2004-11-23
Manufacturer’s Name: Airstream, Inc.
Component Description: WHEELS
Summary Description: WHEEL SEPARATIONS
Summary
WHEEL SEPARATIONS AT THOR INDUSRIES HAVE PREDOMINANTLY OCCURRED IN VEHICLES MANUFACTURED BY KEYSTONE RV.KEYSTONE RV HAS REPORTED 110 SEPARATIONS OF STEEL WHEELS OF 64,727(0.17%) AND 15 SEPARATIONS OF ALUMINUM WHEELS OF 6,984 PRODUCED (0.21%) IN RECREATIONAL VEHICLESMANUFACTURED SINCE MARCH 2003.OTHER DIVISIONS OF THOR INDUSTRIES, DUTCHMAN (4), THOR CALIFORNIA (0), THOR AMERICA (2), KOMFORT CORP (2), AND AIRSTREAM (14) HAVE REPORTED FEWER WHEEL SEPARATIONS OVER A BROADER TIME PERIOD (SINCE 2000) THAN KEYSTONE RV. SINCE A SIGNIFICANT MAJORITY (92%) OF THE WHEEL SEPARATIONS THAT HAVE OCCURRED IN THOR INDUSTRIES VEHICLES HAVE OCCURRED IN KEYSTONE RV VEHICLES, ODI WILL FOCUS INVESTIGATION ACTIVITY ON THESE PRODUCTS AND OPEN AN ENGINEERING ANALYSIS (EA) AT KEYSTONE RV TO INVESTIGATE THE CAUSE(S) FOR WHEEL SEPARATIONS.
NHTSA Action Number: PE04052
Date Opened: 2004-07-22
Date Closed: 2004-11-01
Manufacturer’s Name: General Motors, LLC
Component Description: SUSPENSION
Summary Description: REAR SUSPENSION TOE CONTROL LINK
Summary
THE OFFICE OF DEFECTS INVESTIGATION (ODI) OPENED THIS PRELIMINARY EVALUATION TO INVESTIGATE ALLEGATIONS OF REAR SUSPENSION FAILURE IN THE SUBJECT VEHICLES DURING CERTAIN SEVERE DRIVING MANEUVERS.THE INVESTIGATION WAS PROMPTED BY NHTSA-CONDUCTED NCAP DYNAMIC ROLLOVER TEST INCIDENTS INVOLVING MY 2004 SATURN VUE VEHICLES AND ONE CONSUMER COMPLAINT THAT ALLEGED WHEN RECOVERING FROM A ROAD EDGE DEPARTURE, THE LEFT-REAR WHEEL OF A MY 2003 SATURN VUE ?BENT UNDERNEATH THE VEHICLE,? RESULTING IN A ROLLOVER CRASH.ODI ANALYSIS INDICATES THAT REAR SUSPENSION FAILURE DURING THE NCAP TESTS WAS THE RESULT OF WHEEL RIM-PAVEMENT CONTACT TRANSMITTING SIGNIFICANT COMPRESSIVE FORCES TO THE TOE CONTROL LINK, THUS CAUSING IT TO BUCKLE.THIS FAILURE OCCURRED AT LOW SPEED DURING A SEVERE TEST USED TO ASSESS ROLL STABILITY.THE FORCES GENERATED DURING THIS TYPE OF WHEEL-RIM PAVEMENT CONTACT ARE MORE THAN SIX TIMES THE GREATEST FORCES MEASURED DURING GM?S MOST SEVERE VEHICLE DEVELOPMENT AND VALIDATION TESTING.ODI INSPECTION AND ANALYSIS OF CONSUMER COMPLAINT VEHICLES SHOWED THAT DAMAGE TO THE TOE CONTROL LINK APPEARED TO BE THE RESULT OF VEHICLE CRASHES AND DID NOT PRECIPITATE THE CRASHES.TO DATE, ODI IS AWARE OF NO VEHICLE CRASHES OR ROLLOVER INCIDENTS RELATED TO THE ALLEGED DEFECT.ADDITIONALLY, THE MANUFACTURER HAS NOTIFIED THE AGENCY THAT IT IS CONDUCTING A VOLUNTARY CUSTOMER SATISFACTION SERVICE CAMPAIGN TO STRENGTHEN THE REAR SUSPENSION OF THE SUBJECT VEHICLES.A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED. ACCORDINGLY, THIS INVESTIGATION IS CLOSED. THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT A SAFETY-RELATED DEFECT DOES NOT EXIST. THE AGENCY WILL TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.SEE SUMMARY REPORT ATTACHED FOR FURTHER DETAIL.
← Previous 1 … 254 255 256 257 258 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【Diesel Engines】HD500 heavy duty truck scanner is tailored to vehicles equipped with cummins, cat, detroit, paccar, international, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- 【Advanced DPF Management】The longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu.
- 【Cylinder Cut-off Services】The cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
- 【Speed Limit Reset & ABS】Limit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this scanner for truck also can make you achieve a firm brake pedal by removing air from the ABS module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- 【Access All Major Systems with Ease】The HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- WHY NEXAS NL102 Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102 diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: This heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: The diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- 【2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 25 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 🔥🔥🔥2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
This product presentation was made with AAWP plugin.
Last update on 2025-05-02 / Affiliate links / Images from Amazon Product Advertising API