Complaint information entered into NHTSA’s Office of Defects Investigation vehicle owner’s complaint database is used with other data sources to identify safety issues that warrant investigation and to determine if a safety-related defect trend exists. Complaint information is also analyzed to monitor existing recalls for proper scope and adequacy.
NHTSA ID Number: 11353942
Complaint Date: 2020-09-09
Fail Date: 2020-09-05
Manufacturer’s Name: General Motors
, LLC
Vehicle/Equipment Make: CHEVROLET
Vehicle/Equipment Model: TRAVERSE
Model Year: 2018
Summary
TRANSMISSION SHUDDERS WHEN ACCELERATING. HAVE BEEN TO DEALER AND THEY HAVE RESET COMPUTER AND AFTER ABOUT 800 IT STARTS BACK. TOOK BACK TO DEALER THEY CHANGED FLUID AND RESET COMPUTER. AFTER 800 MILES IT DID IT AGAIN, TOOK BACK TO DEALER AND THEY RESET COMPUTER AND WE DROVE IT FOR AN HOUR WITH NO SHUDDER. AFTER 800 AGAIN IT DID IT AGAIN. SERVICE MANAGER ACKNOWLEDGES THEY HAVE TROUBLE BUT CHEV HAS NO FIX YET. ITS IN THE TRUCK TOO HE SAID. IT HAS 51,000 MILES NOW AND STILL SHUDDERING... IT STILL UNDER WARRANTY BUT THEY CANT FIXT IT BECAUSE THEY DON'T KNOW WHAT ELSE TO DO.
Read More...NHTSA ID Number: 11353941
Complaint Date: 2020-09-09
Fail Date: 2020-08-01
Manufacturer’s Name: General Motors, LLC
Vehicle/Equipment Make: CHEVROLET
Vehicle/Equipment Model: CAPTIVA
Model Year: 2014
Summary
THE CAR WILL GO COMPLETELY DEAD WITH 0 POWER AND THE KEY WILL NOT COME OUT OF THE IGNITION. OPEN THE HOOD AND POUND ON A FUSE BOX AND IT WILL START. IT IS DONE THIS ONE IS STATIONARY AND WHEN YOU'RE PULLING ON TO THE HIGHWAY OR OUT OF YOUR DRIVEWAY AND IT WILL KILL ITSELF
Read More...NHTSA ID Number: 11353940
Complaint Date: 2020-09-09
Fail Date: 2020-09-08
Manufacturer’s Name: Kia America, Inc.
Vehicle/Equipment Make: KIA
Vehicle/Equipment Model: OPTIMA
Model Year: 2014
Summary
TL* THE CONTACT OWNS A 2014 KIA OPTIMA. THE CONTACT STATED THAT WHILE DRIVING, THE STEERING WHEEL SUDDENLY BEGAN TO SHAKE, VIBRATE AND BECAME VERY DIFFICULT TO TURN IN EITHER DIRECTION. THE VEHICLE WAS TOWED TO NATIONWIDE KIA SERVICE CENTER LOCATED AT 20 WEST TIMONIUM RD, TOWSON, MD 21093, TO BE DIAGNOSED. THE CONTACT WAS INFORMED THAT THE STEERING COLUMN WAS DEFECTIVE AND NEEDED TO BE REPLACED. THE VEHICLE WAS NOT YET REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 49,000. THE VIN WAS NOT AVAILABLE.
NHTSA ID Number: 11353939
Complaint Date: 2020-09-09
Fail Date: 2020-08-18
Manufacturer’s Name: General Motors, LLC
Vehicle/Equipment Make: CHEVROLET
Vehicle/Equipment Model: TRAVERSE
Model Year: 2018
Summary
MY CAR WHEN PLACED IN PARK SHOWS BY THE SHIFTER IT'S IN PARK AND ON THE DASH BUT WHEN I GO TO TURN CAR OFF SAYS PUT CAR IN PARK. I THEN HAVE TO PUT IN ANOTHER GEAR AND TRY AGAIN. THIS CAN TAKE UP TO 2-3 TIMES BEFORE IT WORKS. IF NOT PAYING ATTENTION YOU CAN LEAVE YOUR CAR NOT KNOWING IT'S ON BUT NOT RUNNING. I'VE CONTACTED DEALERSHIP I PURCHASED FROM AND THEY SAID THERE ARE CARS NEWER THAN MINE WITH SAME ISSUE. I'VE CONTACTED CORPORATE AND THEY SAID THEY'VE RECEIVED COMPLAINTS. MY CAR IS OVER WARRANTY BY MILEAGE BUT MY CAR ONLY BEING 2 YEARS OLD I FIND THIS VERY UNSATISFACTORY AND UNSAFE!
Read More...NHTSA ID Number: 11353938
Complaint Date: 2020-09-09
Fail Date: 2020-09-07
Manufacturer’s Name: Chrysler (FCA US, LLC)
Vehicle/Equipment Make: JEEP
Vehicle/Equipment Model: CHEROKEE
Model Year: 2019
Summary
TL* THE CONTACT OWNS A 2019 JEEP CHEROKEE. THE CONTACT STATED THAT WHILE DRIVING 70 MPH, THE RPMS FLUCTUATED UP AND DOWN. THE VEHICLE LUNGED FORWARD, INDEPENDENTLY ACCELERATED AND DECELERATED. THE CONTACT THOUGHT THAT THE VEHICLE HAD BEEN REAR ENDED. THE VEHICLE FAILED TO ACCELERATE BACK TO CRUISING SPEED. THE CONTACT PULLED OFF TO THE SIDE OF THE HIGHWAY. THE VEHICLE WAS PARKED ON A SLIGHT INCLINE AND ROLLED BACKWARDS. THE CONTACT USED THE PARKING BRAKE TO COMPLETELY STOP THE VEHICLE. THE VEHICLE WAS TOWED TO ALLEN MELLO CHRYSLER JEEP DODGE RAM (13 MARMON DR, NASHUA, NH 03060 (844) 532-9794). THE MECHANIC HEARD A GRINDING SOUND WHEN THE VEHICLE WAS STARTED. THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 23,000.*DT CONSUMER STATED PTU POWER TRANSFER UNIT WAS REPLACED AS WELL AS THE PART OF THE TRANSMISSION. DEALER HAS NOT PUT ANY OF WHAT HAD OCCURRED IN THEIR REPORTS.*JB
NHTSA ID Number: 11353937
Complaint Date: 2020-09-09
Fail Date: 2020-09-08
Manufacturer’s Name: Honda (American Honda Motor Co.)
Vehicle/Equipment Make: HONDA
Vehicle/Equipment Model: PILOT
Model Year: 2017
Summary
ENGINE MALFUNCTION LIGHT COMES ON AND INDICATES EMISSION CONTROL PROBLEM. . LOW AND ERRATIC POWER. CHECKED CODE AND IT WAS P0430 RELATED TO FUEL INJECTORS AND FUEL PUMP.
Read More...NHTSA ID Number: 11353936
Complaint Date: 2020-09-09
Fail Date: 2020-09-06
Manufacturer’s Name: Chrysler (FCA US, LLC)
Vehicle/Equipment Make: JEEP
Vehicle/Equipment Model: CHEROKEE
Model Year: 2014
Summary
WE BOUGHT THE CAR USED ABOUT 3 YEARS AGO. PERIODICALLY IT STALLS AND WILL NOT GO FORWARD. IT HAS HAPPENED IN THE MIDDLE OF INTERSECTIONS. I HAVE TAKEN IT TO THE LOCAL DEALER AND THEY DON'T SHOW ANYTHING WRONG WITH IT. IT HAPPENS RANDOMLY SO YOU CAN REALLY SHOW THE TECHNICIAN WHAT IT IS DOING BUT NOTHING SHOWS UP WHEN THEY RUN THE DIAGNOSTICS. THIS IS A KNOWN PROBLEM FOR THE 2014 JEEP CHEROKEE. I HAVE SEEN COMPLAINTS FROM 2015 FORWARD. WHEN IT STOPS IN THE MIDDLE OF THE ROAD WE HAVE TO FIND A PLACE TO STOP AND TURN IT OFF. USUALLY IT WILL CORRECT ITSELF WHEN IT IS RESTARTED. CLEARLY THIS IS VERY DANGEROUS. I DON'T KNOW IF JEEP CAN'T FIX THE PROBLEM OR WON'T FIX THE PROBLEM. THIS HAS HAPPENED ABOUT 10 TIMES IN THE LAST 3 YEARS.
NHTSA ID Number: 11353935
Complaint Date: 2020-09-09
Fail Date: 2020-09-08
Manufacturer’s Name: Volkswagen Group of America, Inc.
Vehicle/Equipment Make: AUDI
Vehicle/Equipment Model: Q5
Model Year: 2015
Summary
MY 2015 AUDI Q5 HAS 36,000 MILES ON IT, IS GARAGE KEPT AND TAKEN WELL CARE OF. IT JUST NOW HAD BOTH REAR BEARINGS GO OUT AT THE SAME TIME. IT MADE A HORRIBLE NOISE WHILE ON SMOOTH HIGHWAY, AND I HAD IT TOWED TO A MECHANIC WHO DEEMED IT UNSAFE TO DRIVE. THERE IS A RECALL ON THE FRONT BEARINGS BUT AUDI REFUSES TO TAKE RESPONSIBILITY FOR THE ISSUE. UNSAFE AND COULD KILL PEOPLE.
NHTSA ID Number: 11353934
Complaint Date: 2020-09-09
Fail Date: 2020-09-08
Manufacturer’s Name: Jaguar Land Rover North America, LLC
Vehicle/Equipment Make: JAGUAR
Vehicle/Equipment Model: I-PACE
Model Year: 2019
Summary
I STARTED MY VEHICLE AS USUAL. IT WAS A HOT DAY OUTSIDE IN WASHINGTON. THE CAR HAD BEEN PARKED OUTSIDE WITH THE SUN DIRECTLY ABOVE. (INSIDE THE VEHICLE IT WAS EXTREMELY HOT) I IMMEDIATELY WENT TO TURN ON THE AC. IT TOOK A SECOND TO FINALLY COME ON AND THEN IT DIDN'T BLOW ANY COOL AIR. I RECHECKED THAT I HAD IT ON THE COOLEST TEMP POSSIBLE. I DROVE AROUND APPROXIMATELY 37 MINUTES AND STILL NO A/C. I HAVE NO IDEA HOW IT WENT OUT OR WHY. I CHECKED MY RECALLS AND IT STATED ALL UPDATES HAVE BEEN MADE TO MY VEHICLE AND NO RECALLS.
Read More...NHTSA ID Number: 11353933
Complaint Date: 2020-09-09
Fail Date: 2020-09-08
Manufacturer’s Name: Ford Motor Company
Vehicle/Equipment Make: FORD
Vehicle/Equipment Model: EDGE
Model Year: 2013
Summary
2013 FORD EDGE UNEXPECTEDLY STALLS WHILE DRIVING ON STREET. VEHICLE SETS A CODE AND NOT CORRECTED. NOW DETERMINED THROTTLE BODY MODULE NEED REPLACEMENT. ALSO HAVE A 2015 FORD EDGE THAT EXHIBITED SAME PROBLEM. IT WAS DETERMINED THE PURGE VALVE WAS BAD. A KNOW NUMBER OF PEOPLE HAD THIS SIMILAR PROBLEMS. ANY FUTURE ACTIVITY BEING TALKED ABOUT
← Previous 1 … 27,554 27,555 27,556 27,557 27,558 … 151,352 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Investigations
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【Diesel Engines】HD500 heavy duty truck scanner is tailored to vehicles equipped with cummins, cat, detroit, paccar, international, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- 【Advanced DPF Management】The longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu.
- 【Cylinder Cut-off Services】The cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
- 【Speed Limit Reset & ABS】Limit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this scanner for truck also can make you achieve a firm brake pedal by removing air from the ABS module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- 【Access All Major Systems with Ease】The HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- WHY NEXAS NL102 Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102 diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: This heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: The diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- 【2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 25 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 🔥🔥🔥2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
This product presentation was made with AAWP plugin.
Last update on 2025-05-05 / Affiliate links / Images from Amazon Product Advertising API